Gypsona Plaster of Paris Bandages are made from a specially woven cloth, uniformly impregnated with fast setting plaster of Paris. The bandage is spooled on a round core for superior bandage stability. The interlocked weave of this cloth makes the wet bandage more stable and conformable, to mould around awkward contours. The leno cloth also helps to minimise plaster loss. Gypsona Plaster of Paris Bandages create a strong cast for immobilising broken and fractured limbs. The rapid fracture immobilisation is important especially in accident and emergency departments. Available in 4 widths.
For rigid immobilisation
Strong and fast setting Plaster of Paris bandages
Excellent conformability and low plaster loss
Creates a strong cast for immobilising broken and fractured limbs
Flexitime Dynamix Monophase Refill - 2x380ml
OV3273
Regular price
£172.37
/
Flexitime Dynamix Monophase Refill - 2x380ml
Aquasil Soft Putty: Regular Set - 2 x 450ml Aquasil Ultra is a very high viscosity impression material with optimum flexibility for easy removal from undercuts. It is for use as a tray material for the double mix technique or as primary impression material for two-step putty/wash technique.
PROPERTIES Exceptional wettability: accurate reproduction of preparations and hard and soft tissues. No bubbles, friction or error. Excellent mechanical resistance: easy removal of the impression without distortion or tearing. CONTENTS 1 x 450ml tub of Aquasil Ultra base 1 x 450ml tub of Aquasil Ultra catalyst
Aquasil Soft Putty: Regular Set - 2 x 450m
OV3272
Regular price
£214.56
/
Aquasil Soft Putty: Regular Set - 2 x 450m
Garant Intra-Oral Tips - Yellow (50)
President The Original: Putty Fast Soft 2 x 300m
OV3271
Regular price
£96.89
/
President The Original: Putty Fast Soft 2 x 300m
President The Original: Putty Fast Soft 2 x 300ml A small step for dentists. A great step for dentistry.
The introduction of PRESIDENT in 1975 – the first A-Silicone in the market – is considered a milestone in the development of high-precision dental impression materials.
Still today the brand convinces with its sovereign quality.
On the occasion of the 40th anniversary of PRESIDENT, the first A-Silicone line was relaunched under the new brand name PRESIDENT The Original with improved characteristics.
New colours
The new, fresh colors of the PRESIDENT line provide a better contrast between wash and tray material and thus show more accurate detail readability.
Tray Materials
PRESIDENT tray materials convince with high tear strength and elasticity. Due to flawless removal impressions are precise and succeed even under most difficult conditions.
PRESIDENT heavy body and MonoBody are surface activated and thixotropic with fast pressure build up so that the wash material is easily driven into the clinically critical areas. PRESIDENT putties mix quickly and are offered in three different end hardnesses for each individual case.
Putty is the preferred material for the 2-step technique where pressure is needed. Different end hardnesses offer optimal stability and simple ease of cutting.
CONTENTS 300ml base 300ml catalyst 2 x measuring spoons
Provil Novo: Putty Fast (900ml)
OV3270
Regular price
£124.92
/
Provil Novo: Putty Fast (900ml)
Provil Novo is a modular impression system that, due to its varying viscosities and setting times, is suited to all types of clinical situations.
Provil Novo is a material that belongs to the addition silicone family.
Improved cartridge system: separate base and catalyst outlet openings.
No risk of contamination between the 2 components.
PROPERTIES Modular system: Ideally blendable consistencies Suited to all types of clinic situations Adapts to any work habits Used for all impression techniques MATERIAL High technical tolerance Precise reproduction down to the slightest detail, even in a humid environment | Lasting dimensional stability Hydroactivity: excellent wettability; does not absorb water; disinfection possible in an aqueous environment; plaster model with smooth surfaces and no bubbles. VARIOUS VISCOSITIES Putty (matter to be kneaded) Putty Soft (matter to be kneaded) Mono-phase (highly thixotropic) Medium (thixotropic) Light (very low viscosity) Each viscosity comes in fast set or regular set.
Turbomix Heavy Fast Turbomix is a complete range of vinyl polysiloxane impression materials for automatic mixing.
INDICATIONS 3 different viscosities: Turbomix can be used in double mix technique as in the wash technique. All Turbomix products are compatible with Turboflex light from R&S.
PROPERTIES Excellent reproduction of details Different colours for an optimal contrast Hydrocompatible Excellent thixotropy Excellent dimensional stability Elastic memory: 99.5% Compatible with all plasters Snap’ set effect CONTENTS 2 x 380ml catridges
Penta Red Mixing Tips
OV3267
Regular price
£73.44
/
Penta Red Mixing Tips
DETAILS
Penta Red Mixing Tips Red mixing tips for the Penta delivery system
Unique design reduces dispensing forces by up to 50 percent over previous mixing tip to facilitate easier extrusion of impression materials. Homogeneous mixing for void-free impressions. To be used only with color-capped Pentaª Foil Bags. CONTENTS Pack of 50 mixing tips
R&S HydroSoft: Putty Soft - Regular Set
OV3266
Regular price
£99.26
/
R&S HydroSoft: Putty Soft - Regular Set
R&S HydroSoft: Putty Soft - Regular Set R&S HydroSoft is a vinyl polysiloxane addition silicone with excellent mechanical properties and detail reproduction for high precision dental impressions.
Base impression material in the one-step technique (double mix) or as a primary impression material in the 2-step technique. All trays are suitable. Class: I FEATURES Soft and pleasant texture. Pleasant mixing and soft in mouth with its Wild Strawberry taste. Excellent mechanical properties and detail reproduction. Low linear shrinkage (<0.20%). Highly hydrophilic, allowing greater accuracy and decreasing the risk of defects. High resistance to inorganic agents and UV rays Good dimensional stability and wettability. Can run multiple models from the same impression without risk of deformation. Excellent mechanical resistance: easy to remove impression without distortion or tearing. CHARACTERISTICS Type: Putty Set: Regular. Mixing time: 30 secs. Working time: 2 min. Oral setting time: 3 min 30 secs. Colour: Sky blue CONTENTS 450ml base 450ml catalyst.
President The Original: Putty 2 x 300m
OV3265
Regular price
£96.89
/
President The Original: Putty 2 x 300m
President The Original: Putty 2 x 300ml A small step for dentists. A great step for dentistry.
The introduction of PRESIDENT in 1975 – the first A-Silicone in the market – is considered a milestone in the development of high-precision dental impression materials.
Still today the brand convinces with its sovereign quality.
On the occasion of the 40th anniversary of PRESIDENT, the first A-Silicone line was relaunched under the new brand name PRESIDENT The Original with improved characteristics.
New colours
The new, fresh colors of the PRESIDENT line provide a better contrast between wash and tray material and thus show more accurate detail readability.
Tray Materials
PRESIDENT tray materials convince with high tear strength and elasticity. Due to flawless removal impressions are precise and succeed even under most difficult conditions.
PRESIDENT heavy body and MonoBody are surface activated and thixotropic with fast pressure build up so that the wash material is easily driven into the clinically critical areas. PRESIDENT putties mix quickly and are offered in three different end hardnesses for each individual case.
Putty is the preferred material for the 2-step technique where pressure is needed. Different end hardnesses offer optimal stability and simple ease of cutting.
CONTENTS 300ml base 300ml catalyst 2 x measuring spoons
Clinix Siliperfect AD II - Light Fas
OV3264
Regular price
£58.92
/
Clinix Siliperfect AD II - Light Fas
Clinix Siliperfect AD II Light Fast Siliperfect AD II Light Fast is an addition polymerization vinylpolysiloxane silicone perfectly suited for all types of 2 viscosity impressions.
INDICATIONS Perfectly suited for all types of 2-viscosity impressions:
Wash technique: two-step impression Double mixing: imprint in one time. PROPERTIES Excellent dimensional stability Very accurate reproduction of details Elastic memory greater than 99% Hydrocompatibility: high accuracy of impressions even in the presence of gum fluid or bleeding Perfect thixotropy Easy and tear-free disinsertion Perfect chemical adhesion between materials Impressions can be immersed in disinfectant solutions without dimensional alterations Compatible with all plasters Absence of microporosities. Self-mixing system that guarantees a perfect dosage with a homogeneous mixture, as well as a regular setting time.
CHARACTERISTICS Mixing time: automatic mixing Working time: 1 min 30 sec Time taken in the mouth: 2 min 30 sec Shore A hardness: 53 ± 2 Green colour CONTENTS 2 x 50ml cartridges of Siliperfect AD II Light Fast 12 x mixing tips
Elite HD+ Light Body Fast Set
OV3262
Regular price
£55.54
/
Elite HD+ Light Body Fast Set
Elite HD+ Light Body Fast Set Elite HD+ is an addition silicone that combines the effects of nanotechnology with hydro-compatibility, thus guaranteeing high performance in a variety of clinical conditions, even the most difficult.
Hydrophilic with nano-fillers to improve fluidity and reduce air blows to enhance sulcus detail. Snap set minimises micro-movement. High visibility of detail – light colours with good contrast between putty/heavy and wash. CONTENTS 2 x 50ml cartridges (Base & Catalyst) 12 x yellow mixing tips
Clinix Siliperfect AD II - Putty Fast Soft
OV3261
Regular price
£84.96
/
Clinix Siliperfect AD II - Putty Fast Soft
Vinyl polysiloxane impression material of high precision. For use in all impression types.
Siliperfect-AD II is a vinyl polysiloxane silicone elastomer that cross-links by an addition reaction. The hydrophilic properties of Siliperfect-AD II enable enhanced precision and reduced risk of voids forming due to presence of saliva. The mechanical properties of the cured material are excellent as is the reproduction of details.
INDICATIONS For use in all 2 viscosity impression types. Wash technique Double mixing PROPERTIES Excellent dimensional stability Thixotropic Hydrocompatibility: impressions are always highly precise, even when contact with gingival fluid and bleeding High elastic memory Compatible with all plasters. CHARACTERISTICS Mixing time: 30 sec Working time: 1 min 30 sec Time taken in the mouth: 2 min 30 sec Shore A hardness: 60 ± 2 Colour: Purple CONTENTS 2 x 250ml tubs
R&S Turboflex: Light Fast Set (2 x 50ml) + 12 Tips
OV3260
Regular price
£59.52
/
R&S Turboflex: Light Fast Set (2 x 50ml) + 12 Tips
R&S Turboflex: Light Fast Set + Tips Maximum precision in detail reproduction. High tear strength. Possibility of casting the model after disinfection.
INDICATIONS Turboflex silicones consistency is suited to the ‘wash technique’ and to double mixing. Turboflex has quite a long working time, followed by a very short setting time. PROPERTIES Exceptional detail reproduction Thixotropy: washes are easily injected and do not overflow during setting Hydrocompatibility: your impressions are always highly precise, even when in contact with gingival fluid and bleeding Good dimensional stability High elastic memory: 99% removal is easy, and you can make several models from one impression, with no risk of distortion CONTAINS 2 x 50ml Cartridges 12 x Tips
R&S Turboflex: Soft Normal Set Putty (2 x 400g)
OV3259
Regular price
£69.06
/
R&S Turboflex: Soft Normal Set Putty (2 x 400g)
Elite HD+ Putty Soft Fast Set Elite HD+ is an addition silicone that combines the effects of nanotechnology with hydro-compatibility, thus guaranteeing high performance in a variety of clinical conditions, even the most difficult.
Hydrophilic with nano-fillers to improve fluidity and reduce air blows to enhance sulcus detail. Snap set minimises micro-movement. High visibility of detail – light colours with good contrast between putty/heavy and wash. Setting Times: Fast Set - Working time: 1.5 mins, intra-oral setting time: 2.5 mins CONTENTS 1 x 250ml tub of base material 1 x 250ml tub of catalyst material
R&S Turboflex: Soft Fast Set Putty (2 x 400g)
OV3258
Regular price
£79.00
/
R&S Turboflex: Soft Fast Set Putty (2 x 400g)
R&S Turboflex: Soft Fast Set Putty (2 x 400g) Maximum precision in detail reproduction. High tear strength. Possibility of casting the model after disinfection.
INDICATIONS Turboflex silicones consistency is suited to the ‘wash technique’ and to double mixing. Turboflex has quite a long working time, followed by a very short setting time. PROPERTIES Exceptional detail reproduction Thixotropy: washes are easily injected and do not overflow during setting Hydrocompatibility: your impressions are always highly precise, even when in contact with gingival fluid and bleeding Good dimensional stability High elastic memory: 99% removal is easy, and you can make several models from one impression, with no risk of distortion SOFT PUTTY FAST SET CHARACTERISTICS Mixing time: 30 sec Working time: 1 min 30 sec Time taken in the mouth: 2 min 30 sec Shore A hardness: 60 ± 2 Standard: ISO 4823 Type 0 putty consistency Colour: Yellow CONTAINS Box of 250ml of base + 250ml of catalyst (400g base + 400g catalyst).
V-Posil: Putty Fast - 2 x 450ml
OV3257
Regular price
£148.34
/
V-Posil: Putty Fast - 2 x 450ml
V-Posil: Putty Fast - 2 x 450ml Precision impressions are a means of communication between the dentist and dental technician. Any imprecisions in an impression will transfer to the models, and can often go unnoticed until the final prosthesis is being fitted.
Precise dental restorations require a material with properties that support optimal impression taking, from the very outset and right through to the pouring stage.
V-Posil was developed with the aim of creating a material that consistently lives up to this service philosophy, in order to combine:
Clinically relevant parameters Treatment convenience Patient comfort INDICATIONS V-Posil Putty is used as preliminary material for:
Two-step putty-wash impression technique One-step putty-wash impression technique Two-step putty-wash impression technique using a foil (plastic putty spacer) One-step putty impression technique for forming functional peripheries ADVANTAGES Highly hydrophilic A-silicone for maximum precision High dimensional accuracy Long working time combined with a short intraoral setting time High recovery after deformation Good hydrophilicity, even after setting, renders pouring and thus the prosthetic restoration perfect CONTENTS 2 x 450ml Putty Fast
Affinis Putty Fast Soft (2 x 300ml)
OV3256
Regular price
£126.70
/
Affinis Putty Fast Soft (2 x 300ml)
Affinis Putty Fast Soft (2 x 300ml) PERFECT IMPRESSIONS A perfect AFFINIS impression is the key for accurately fitting, laboratory fabricated restorations. It provides the ideal basis for successful teamwork between the dentist and the dental technician.
The premium A-Silicone AFFINIS differs in various characteristic features from other surface activated impression materials:
INNOVATIVE SURFACE AFFINITY The differentiating element of AFFINIS is a fast and innovative affinity of mixed material to moist tooth structure and tissue (gingiva).
OPTIMIZED FLOW AFFINIS however, based on its surpassing combination of additives, which are capable of breaking material structures, displays a very low barrier to flow (self-contouring consistency) At the same time, the mixed material is optimal thixotropic not to drip off the preparation.
BETTER MODELS AFFINIS, due to its synergistic and extremely active surfactant system, displays a fast and outstanding wetting by water of the set impression. When pouring the gypsum, the dental technician will appreciate these properties.
FIRST EVER AUTOCLAVABLE IMPRESSION All AFFINIS and AFFINIS PRECIOUS impressions are now autoclavable at 134° C without the loss of its well-known and appreciated AFFINIS physical properties. The new autoclavable AFFINIS impression material with a heat-resistant impression tray and special adhesive provides an integrated system for completely new possibilities in prevention. AFFINIS impressions - not only clean, but also sterile.
AFFINIS putties have an easy mixing consistency and are compatible with all AFFINIS wash materials.
AFFINIS putty soft is a standard putty in the AFFINIS putty range. The compatible consistencies of the base and catalyst ensure for quick and easy mixing.
CONTENTS 1 x 300ml base 1 x 300ml catalyst 2 x dosage spoons
Honigum: Putty - Soft Fast (2 x 450ml)
OV3255
Regular price
£146.76
/
Honigum: Putty - Soft Fast (2 x 450ml)
Honigum: Putty - Soft Fast Stays where you need it – Flowable when you want it.
Stable or flowable, Honigum scores highest in both disciplines due to a specially patented rheologically active matrix; this allows for unequalled flowability under sheer stress and extraordinary stability when no pressure is applied.
Extraordinary stability Unparalleled flow characteristics Real snap set Excellent hydrophilicity and tear strength Exceptional detail reproduction Neutral taste and honey scent CONTENTS 2 x 450ml Tubs
About R&SR&S Turboflex: Soft Fast Set Putty (2 x 400g)
OV3254
Regular price
£83.88
/
About R&SR&S Turboflex: Soft Fast Set Putty (2 x 400g)
R&S Turboflex: Soft Fast Set Putty (2 x 400g) Maximum precision in detail reproduction. High tear strength. Possibility of casting the model after disinfection.
INDICATIONS Turboflex silicones consistency is suited to the ‘wash technique’ and to double mixing. Turboflex has quite a long working time, followed by a very short setting time. PROPERTIES Exceptional detail reproduction Thixotropy: washes are easily injected and do not overflow during setting Hydrocompatibility: your impressions are always highly precise, even when in contact with gingival fluid and bleeding Good dimensional stability High elastic memory: 99% removal is easy, and you can make several models from one impression, with no risk of distortion SOFT PUTTY FAST SET CHARACTERISTICS Mixing time: 30 sec Working time: 1 min 30 sec Time taken in the mouth: 2 min 30 sec Shore A hardness: 60 ± 2 Standard: ISO 4823 Type 0 putty consistency Colour: Yellow CONTAINS Box of 250ml of base + 250ml of catalyst (400g base + 400g catalyst).
