Toileting

Bariatric Self-Propelled Wheeled Shower Commode Chair with Standard Armrests

Description

Bariatric Self-Propelled Wheeled Shower Commode Chair with Standard Armrests
When you suffer from limited mobility and have excess weight, simple tasks like going for a shower or to the toilet can be uncomfortable. This discomfort can be exacerbated if you are a more independent user. The Bariatric Self-Propelled Wheeled Shower Commode Chair with Standard Armrests allows you to perform these tasks comfortably alone.

Features and Benefits
Stainless steel commode
Can be used as a shower chair, commode or over toilet
Extra wide and strongly built chair
Available in two widths: 610mm or 710mm
Ideal for the more independent user
Self-propelled chair so you can move around by yourself
Solid, one-piece handle bar so carer maintains good grip
Chair is equipped with industrial vinyl castors for easy manoeuvrability
Extra long, angled armrests removable for easier washing or transferring
Comfortable padded, split seat that's waterproof and antibacterial
Can hold maximum weight of 51 stone (325kg)
Greater Independence
Designed to allow you to navigate around the house by yourself, the Bariatric Chair has self-propelled wheels. This is particularly suited to the more independent user who doesn't want or require help while they shower or go to the bathroom.

Removable Armrests
The extra long, angled armrests are removable to allow easy access for washing or transferring. This makes transferring and washing more safe.

The chair also has a comfortable padded, split seat that is both waterproof and antibacterial. This is particularly important if you spend long periods of time in the chair relaxing in the shower.

Technical Specifications of the Shower Commode Chair
Width-adjustable PU foam footrests spread up to a total of 1100mm (43.25)
Seat depth: 560mm (22)
Seat height: 550mm (21.75)
Floor to handle bar: 990mm (39)
Seat to footrest: 400 - 480mm (15.75 - 19)
Footrest width adjustment: 580 - 1100mm (22.75 - 43.25)
Backrest size (H x W): 320 x 520mm (12.5 x 20.5)
Under seat clearance: 445mm (17.5)
Overall depth: 1120mm (44)
Rear wheels: 610mm (24) diameter
Wheel diameter: 125mm (5)
Differences Between the Two Shower Commode Chair Options
The Bariatric Attendant-Wheeled Shower Commode Chair is available with two differently sized seats:

Seat Width / Overall Width: 610mm (24) / 670mm (26.25)
Seat Width / Overall Width: 710mm (28) / 770mm (30.25)

Cefndy Super Bariatric Fixed Height Commode Extra strong commode

For patients suffering from reduced mobility, it is vital to ensure that the apparatus they depend on for everyday living is highly reliable, fully comfortable and perfectly suited to their needs. The Cefndy Super Bariatric Adjustable Height Commode boasts a range of high quality features - including an extra-strong steel construction and transit wheels - making it an excellent choice for any patient requiring a commode in their day to day life.

Features of the Super Bariatric Adjustable Height Commode
Reinforced framework in heavier gauge steel caters for users up to 318kg/50st
Easy clean upholstery in two options:
Padded Vinyl, heat sealed for cleaning without risk of water ingress
Polyurethane, soft feel and highly comfortable
Transit wheels on 2 legs for easy tipping and moving
Non-slip, non-marking rubber feet
Options for detachable arms and back for full customisation
Potty loads from both front & rear
Fully stackable
Specifications of the Super Bariatric Adjustable Height Commode

Width Between Arms 800mm
Seat Height 450 - 600mm
Seat Width 780mm
Seat Depth 460mm
Seat to Top of Arm 170mm
Seat to Top of Back 375mm
Max User Weight 318kg / 50st
Delivery
Please allow 5 - 10 working days for delivery of the commode.

The Cefndy Range
Offering high quality health care products since 1976, Cefdny offers a wide range of product options. The adjustable height commode is also available in Bariatric and Mediatric models.

Homecraft Deluxe Attendant Heavy-Duty Shower Commode Chair (510mm Seat Width)

Homecraft Deluxe Attendant Heavy-Duty Shower Commode Chair (510mm Seat Width)
Performing tasks like washing yourself or going to the toilet when you have limited mobility can be difficult, especially if you value your independence. The Homecraft Deluxe Attendant Heavy-Duty Shower Commode Chair (510mm Seat Width) allows you to shower and use the toilet with very little assistance from your carer.

Features and Benefits of the Chair
Large seat for the larger user
Can hold maximum weight of 23.5 stone (150kg)
Lightweight, silver-painted aluminium frame
Frame provides a rust-free, high-strength product
Brakes on all four wheels for security
Swing-away, detachable footrests offer comfort and support
Armrests can be flipped back for easy side transfer
Can be used in a shower cubicle or wet room
Can be used as a commode or over standard toilet bowl
Front of seat is cut away to facilitate personal hygiene
Seat insert provided for comfort during transport
Supplied with square commode pan as standard
Detachable back enables chairs to be partially dismantled
Chair is compact when stored
Keep Your Independence
Although the Shower Commode Chair is attendant operated, the chair can simply be wheeled to the correct position and locked in place. This allows you to perform showering and toileting independently. Plus, with its cut-away front, personal cleansing tasks can be completed by yourself without difficulty.

Heavy-Duty Chair
This sturdy, heavy-duty chair has been designed to suit those with heavier frames. The Deluxe Heavy-Duty Shower Commode Chairs have a larger seat width than the original range which allows a corresponding increase in the chair's maximum user weight.

Technical Specifications
Overall height: 990mm (40)
Depth without footrests: 550mm (21.75)
Depth with footrests: 810mm (31.75)
Seat height: 495 - 570mm (19.5 - 22.5)
Seat width: 510mm (20)
Seat depth: 425mm (16.75)
Aperture size (W x D): 190 x 360mm (7.5 x 14)
Front wheel diameter: 130mm (5)
Under seat clearance: 430 - 505mm (17 - 20)

Homecraft Deluxe Attendant Heavy-Duty Shower Commode Chair (560mm Seat Width)

Description

Homecraft Deluxe Attendant Heavy-Duty Shower Commode Chair (560mm Seat Width)
When you have limited mobility, performing seemingly simple tasks like going to the toilet can be difficult, especially if you value your independence. The Homecraft Deluxe Attendant Heavy-Duty Shower Commode Chair (560mm Seat Width) allows you to shower and use the toilet with very little assistance from your carer.

Features and Benefits of the Chair
Large seat for the larger user
Can hold maximum weight of 31.5 stone (200kg)
Lightweight, silver-painted aluminium frame
Frame provides a rust-free, high-strength product
Brakes on all four wheels for security
Swing-away, detachable footrests offer comfort and support
Armrests can be flipped back for easy side transfer
Can be used in a shower cubicle or wet room
Can be used as a commode or over standard toilet bowl
Front of seat is cut away to facilitate personal hygiene
Seat insert provided for comfort during transport
Supplied with square commode pan as standard
Detachable back enables chairs to be partially dismantled
Chair is compact when stored
Keep Your Independence
Although the Shower Commode Chair is attendant operated, the chair can simply be wheeled to the correct position and locked in place. This allows you to perform showering and toileting tasks independently.

Heavy-Duty Chair
This sturdy, Heavy-Duty Chair has been designed to suit those with heavier frames. The Deluxe Heavy-Duty Shower Commode Chair has a larger seat width to allow a corresponding increase in the chair's maximum user weight.

Technical Specifications
Overall height: 990mm (40)
Depth without footrests: 550mm (21.75)
Depth with footrests: 810mm (31.75)
Seat height: 495 - 570mm (19.5 - 22.5)
Seat width: 5600mm (22)
Seat depth: 425mm (16.75)
Aperture size (W x D): 190 x 360mm (7.5 x 14)
Front wheel diameter: 130mm (5)
Under seat clearance: 430 - 505mm (17 - 20)

Homecraft Deluxe Tilt-In-Space Shower Commode Chair

Description

Homecraft Deluxe Tilt-In-Space Shower Commode Chair
If you use a Shower Commode Chair but can never get into a comfortable position, showering and using the bathroom can become a chore. The Homecraft Deluxe Tilt-In-Space Shower Commode Chair is tiltable to provide a secure, comfortable position for washing and toileting.

Key Features of the Deluxe Tilt-In-Space Shower Commode Chair
Enables tilting the user to provide secure, comfortable position
Can be reclined from -5 up to 30 degrees
Padded neck support is fully adjustable
Can be positioned at any angle for maximum comfort
Can hold maximum weight of 20.25 stone (130kg)
Lightweight, silver-painted aluminium frame
Rust-free, high-strength product
Brakes on all four wheels for added security
Swing-away, detachable footrests offer comfort and support
Armrests can be flipped back for side transfers
Cut-away front to facilitate personal hygiene
Suitable for either the professional or domestic setting
Detachable back enables partial dismantling for compact storage
Who Can Use This Reclinable Chair?
With a range of exceptional features that have been designed with the user's and the carer's comfort in mind, the Deluxe Tilt-In-Space Shower Commode Chair is adaptable to a very wide range of users. It enables dignified washing and toileting in the professional and domestic setting, and can hold maximum weight of 20.25 stone (130kg).

Will the Deluxe Tilt-In-Space Commode Chair Fit My Shower?
The Tilt-In-Space Shower Commode Chair is 56cm wide and 117cm high (in total). This should make it suitable for most showers.

How Is This Tilt-In-Space Chair Better Than a Standard Shower Commode?
A standard shower commode can at times make it difficult to get into a comfortable position, which is why the Tilt-In-Space Shower Commode Chair can be reclined from -5 up to 30 degrees. This allows you to tilt back in your chair to find a more secure, comfortable position for washing and using the toilet.

Shower Commode Chair in Reclined Position
Tilt the chair to find a more comfortable position for washing

What Is the Maximum Patient Weight?
The Tilt-In-Space Shower Commode Chair can hold maximum user weight of 20.25 stone (130kg). The seating area measures 425 x 457mm, and is height adjustable from 530mm to 605mm.

Does the Deluxe Tilt-In-Space Shower Commode Chair Have Brakes?
Yes, all four wheels of the Shower Commode Chair come with brakes, which further improves patient safety and makes the chair more convenient to use. Once you wheel the patient to the desired location, secure the brakes to ensure the chair won't move.

Is This Shower Commode Chair Padded?
Tilting back can put more pressure on your neck, which is why the Deluxe Shower Commode Chair has a padded neck support. The support is fully adjustable and can be positioned at any angle for maximum comfort.

Does the Chair Have a Cut-Away Front?
Yes, the Homecraft Deluxe Tilt-In-Space Shower Commode Chair does have a cut-away front to facilitate personal hygiene. The design ensures maximum convenience and comfort for both the carer and the user.

Homecraft Deluxe Tilt-In Space Shower Commode Chair Cut-Away Front
The cut-away front can improve personal hygiene

Technical Specifications
Overall Height: 117cm (46)
Overall Width: 56cm (22)
Seat Height: 53 - 60.5cm (20.25 - 23.75)
Seat Depth: 42.5cm (16.75)
Seat Width: 45.7cm (18)
Aperture Size (W x D): 19 x 36cm (7.5 x 14)
Wheel Diameter: 13cm (5)
Under Seat Clearance: 43 - 50.5cm (17 - 20)

Prima Grab Bar in White 18 / 45cm

Description

Prima Grab Bar In White 18 / 45cm
Grab bars and grab rails are an incredibly useful addition to any environment. Grab rails can be positioned almost anywhere. They can make getting in and out of the bath easier, provide a helpful support when using steps or stairs, or steady you when rising or sitting down. A well-situated shower or toilet rail can make all the difference to safety and confidence around the home.

The Prima Grab Bars are high quality, tough, all plastic grab rails. They are purpose designed for the elderly and for disabled people, with a ribbed finish for extra grip. The grab bars are non-slip even when wet, and are always warm to the touch.

The grab rail grips are slightly oval. This ergonomically designed shape matches the natural human grip making them comfortable to use.

Installing Grab Bars
The Prima Grab Bars can be installed vertically or horizontally to ensure they are at the most helpful angle. They can be fitted on their own or as a combination of vertical or horizontal rails where appropriate for steadying or transfer.

Vertical Mounting - assists in pulling up to standing.
Horizontal Mounting - assists in pushing up and for general mobility.

Prima Grab Rails are made of robust materials and have strong fixing points because it is recognised that they are subject to some hefty pulls and sudden tugs, therefore it is essential that they are fitted competently, according to the instructions.

Please note that screws and rawl plugs are not supplied with the grab rails as there are a number of different surfaces that the grab rails can be fitted to, each requiring a different screw length and fittings.

Max user weight: up to 160kg (dependent upon surface attached to.)

Standard End Bracket for the Moulded Fluted Grab Rail System

Description

Standard End Bracket for the Moulded Fluted Grab Rail System
The Moulded Fluted Grab Rail System is a great way to help you create a grab rail system that exactly suits your needs, so it's important that you can get the components you need. The Standard End Bracket is an end bracket that mounts the end of the rail system to the wall for secure use.

This Standard End Bracket is for use only with the Moulded Fluted Grab Rail System.

Other Component Parts of the Moulded Fluted Grab Rail System
The other available component parts for the Moulded Fluted Grab Rail System are:

90° Elbow Connector
End Caps (Pack of Two)
Straight 800mm Grab Bar
T-Piece Connector

Vitility Grab Rail - 45cm

Description

Vitility Grab Rail - 45cm
The Vitility Grab Rail - 45cm is designed to support you when you need help standing up, like getting out of the bath or getting off the toilet. Affixed to the wall by three screws on both sides, the Vitility Grab Rail - 45cm supports you in getting up and down quickly and independently.

The ribbed surface design on the Vitility Grab Rail - 45cm prevents slipping and provides extra grip.

Key Features of the Vitility Grab Rail - 45cm
The main features and benefits of the Vitility Grab Rail - 45cm are:

Can be easily screwed to a wall - mounting materials are included
Ideal for supporting you when you need help standing up
Ribbed surface offers extra grip and support
Helps you regain your mobility and independence in your home
Weight capacity of the Vitility Grab Rail - 45cm
The maximum weight capacity of the Vitility Grab Rail - 45cm is 120kg (264.5lbs).

Moen Designer Elite Grab Bar

Description

Moen Designer Elite Grab Bar
A grab rail can provide invaluable support in a number of situations around the home. For example, in the bathroom a grab rail can help to reduce the risks of injury from slip hazards. The Moen Designer Elite Grab Bar is specifically designed for bathroom use, featuring an exquisite design that complements a variety of bathroom styles.

Stylish Design
The Designer Elite Grab Bar combines exceptional beauty with a rugged, corrosion-resistant stainless steel construction. Finger notches on the bar provide a secure place for the user the grab, helping to ensure safety.

SecureMount System
The SecureMount System (sold separately) allows the Moen Designer Elite Grab Bar to be installed easily and securely without using wall studs. This allows the Grab Bar to be fixed in a greater variety of locations in your bathroom, ensuring that optimal placement is obtained.

Available Finishes of the Designer Elite Grab Bar
The Designer Elite Grab Bar is available with two different finishes:

Brushed nickel provides a lightly brushed warm grey metallic look
Chrome finish is highly reflective for a mirror-like look that works with any decorating style
Dimensions of the Moen Designer Elite Grab Bar
The Moen Designer Elite Grab Bar is available in two different lengths, with all rail length measurements taken from the centre of the fixing plate. Please select the size you require from the drop-down menu above.

Length of Grab Rail (cm/in) Diameter (cm/in)
40cm (16) 4cm (1.5)
61cm (24) 4cm (1.5)
Warranty Information
The Moen Designer Elite Grab Bar is supplied with a limited lifetime warranty against finish defects.

Homecraft Devon Elite Folding Support Rail with Adjustable Leg

Description

Homecraft Devon Elite Folding Support Rail with Adjustable Leg
The Homecraft Devon Elite Folding Support Rail with Adjustable Leg is an enhanced support rail that attaches to the wall beside a toilet for assistance with accessing and using the loo. With a height-adjustable leg, it provides sturdy support without taking up too much room, and can remain horizontal or be folded into a vertical position as required.

Indications of the Devon Elite Folding Support Rail
Toileting is a part of daily life, and for many people visiting the loo is a routine task that requires little thought. However, for some, this can prove to be a difficult and even painful task. Whether this is as a result of an injury or incident, or as a product of ageing muscles or reduced mobility, lowering to and rising from the toilet can place great strain on both the lower and upper extremities. Even the act of sitting on the toilet without any support can be a challenge.

By installing the folding support rail beside the toilet, it offers a sturdy and reliable rail onto which the user can hold while accessing and using the loo. As the height of the leg can be adjusted, it is an ideal option for most people as it can cater to most heights and requirements.

Design Benefits
The support rail is made from a light yet strong aluminium, with elliptical arms for providing the user with ultimate comfort and grip. The support arm can be raised, and will remain in the vertical position with the locking mechanism securing it into place.

Public Toilets
As public toilets can be visited by a large number of people, many of whom have individual and unique requirements, it is important that they can cater to as many visitors as possible. By ensuring that toilets are available with grab rails, visitors to public loos can feel like their needs have been considered while being able to go about their day with reduced difficulty.

Whether required for use privately in a home, or installed to ensure that all visitors can feel considered and welcome, the Homecraft Devon Elite Folding Support Rail with Adjustable Leg is ideal for offering support and assistance when it is needed most.

Technical Specifications
Back plate dimensions: 230 x 120mm (9 x 4.8)
Height from floor to top of arm: 690 to 840mm (27 to 33) in 60mm increments
Maximum load weight: 127kg (20 stone)
Overall rail dimensions (WxLxD): 50 x 28 x 645mm (2 x 1 x 25.5)

Etac Handy Safety Grab Bars

Description

Etac Handy Safety Grab Bars
The Etac Handy Safety Grab Bars are an invaluable safety aid for everyone, especially those who may be unsteady and would benefit from a little extra help.

The Etac Handy Safety Grab Bars offer the four basic safety functions; pushing and pulling up, supporting while sitting down and security while transferring position.

The Etac Handy Safety Grab Bars are available in different lengths, both straight and angled, to suit all needs and can be positioned horizontally or vertically, the angled design provides additional support when rising and sitting down.

Features of the Etac Handy Safety Grab Bars
Hidden screws and ergonomic design give the product an attractive finish with no sharp edges.
Soft, ribbed surface is easy to grip and reduces the risk of slipping. It will never feel cold to touch.

Deluxe Bath Tub Grab Rail

Description

Deluxe Bath Tub Grab Rail
For many people with limited mobility, safely getting in and out of the bath tub can be a challenge. The Deluxe Bath Tub Grab Rail provides a firm handle at the bath side which is ideal for those needing extra stability when entering and leaving the bath. This handle is also made with a stylish design, able to fit into most bathrooms without standing out from the decor.

Stability and Safety
This Deluxe Bath Tub Rail gives more confidence to the user and a sturdy, durable rail to hold. The coated steel rail is fixed to the side of the bath by a stainless steel clamp, cushioned on the inside by rubber pads. These pads prevent the rail from slipping and also prevent marking or damaging the side of the bath.

Stylish Design
Unlike most bathtub grab rails that can stick out like a sore thumb, this rail has been made to blend into most bathrooms. The low-key design and colour ensures that it will complement nearly any bath tub, providing function as well as style.

Hygienic and Easy to Use
This rail is easily wiped clean, making it suitable for all kinds of environments, including those where high levels of hygiene are necessary. To make operation as simple as possible, the rail can be easily removed from the bath tub side when not required.

Dimensions of the Deluxe Bath Tub Grab Rail
Length: 495mm (19.5 inches)
Height above bath side: 375mm (14.75 inches)
Clamp width adjustment: 76 to 178mm (3 to 7 inches)
Weight: 2.5kg
Please note: The Deluxe Bath Tub Grab Rail is non-returnable if unsuitable on grounds of hygiene. We would recommend measurements are checked to make sure the rail will be suitable for your bath tub. If you require any further information please call our Customer Care Team on 020 7720 2266.

Bath Tub Grab Rail

Description

Bath Tub Grab Rail
For many people with limited mobility, safely getting in and out of the bath tub can be a challenge. The Bath Tub Grab Rail provides a firm handle at the bath side which is ideal for those needing extra stability when entering and leaving the bath.

Stability and Safety
This Bath Tub Rail gives more confidence to the user and a sturdy, durable rail to hold. The coated steel rail is fixed to the side of the bath by a stainless steel clamp, cushioned on the inside by rubber pads. These pads prevent the rail from slipping and also prevent marking or damaging the side of the bath.

Hygienic and Easy to Use
This rail is easily wiped clean, making it suitable for all kinds of environments, including those where high levels of hygiene are necessary. To make operation as simple as possible, the rail can be easily removed from the bath tub side when not required.

Dimensions of the Bath Tub Grab Rail
Length: 457mm (18 inches)
Height above bath side: 349mm (13.75 inches)
Clamp width adjustment: 83 - 140mm (3.25 - 5.5 inches)
Weight: 2.4kg
Please note: The Bath Tub Grab Rail is non-returnable if unsuitable on grounds of hygiene. We would recommend measurements are checked to make sure the rail will be suitable for your bath tub. If you require any further information please call our Customer Care Team on 020 7720 2266.

Moen Designer Grab Bar with Integrated Paper Holde

Description

Moen Designer Grab Bar with Integrated Paper Holder
A grab rail can provide invaluable support in a number of situations around the home such as in the bathroom, where it can help to reduce the risks of injury from slip hazards. A grab bar with integrated storage, such as a shelf or towel bar, can be even more useful.

The Moen Designer Grab Bar with Integrated Paper Holder helps to increase safety while providing handy access to toilet paper. Ideal for safe transition in and out of the tub or shower, its multi-functional design blends intelligently into familiar bath accessories, improving comfort, convenience and organisation.

Sleek Storage
The Moen Designer Grab Bar with Integrated Paper Holder is suitable for use anywhere in the bathroom, with a dual-function design that coordinates with bathroom decor while removing the need for multiple fixtures.

SecureMount System
Two SecureMount anchors (included) allows the Moen Designer Grab Bar with Integrated Paper Holder to be installed easily and securely without using wall studs. This allows the grab bar to be fixed in a greater variety of locations in your bathroom, ensuring that optimal placement can be obtained.

Available Finishes of the Designer Grab Bar
The Integrated Designer Grab Bar is available with a chrome finish. Highly reflective for a mirror-like look, it works with any decorating style.

What Size is the Moen Designer Grab Bar with Integrated Paper Holder?
This grab bar has the following dimensions:

Total Width: Approx. 13 (32.5cm)
Total Height: Approx. 7.5 (19cm)
Total Depth: Approx. 3 (7.5cm)
Tube Diameter: 1 (2.5cm)
Please see the image below for a detailed schematic of the dimensions:

Dimensions of the Moen Grab Bar with Integrated Roll Holder

Warranty Information
The Moen Designer Grab Bar with Integrated Paper Holder is supplied with a limited lifetime warranty against finish defects.

Specifications of the Moen Designer Grab Bar
Maximum User Weight: 113kg (when securely installed)

Drive Medical 12 Suction Grab Bar Rail

Description

Drive Medical 12 Suction Grab Bar Rail
The Drive Medical 12 Suction Grab Bar Rail is ideal for use on a shower wall, in the bath mounted on the tub, for use as a temporary towel bar, near a chair or stairwell for assistance when standing or climbing stairs.

The Drive Medical 12 Suction Grab Bar Rail is quickly and easily installed on tiled or marble surfaces without tools. No holes to drill. This also makes it great for travelling as it has a quick and easy release system.

The Drive Medical 12 Suction Grab Bar Rail has large rubber suction cups (4½) provide superior adhesion properties.

Drive Medical 12 Suction Grab Bar Rail Length
This grab rail is 12 (30cm) in length. This is the overall length of the item measuring from plunger to plunger, meaning that the grip area is only designed for one hand to fit on this part of the rail. If a larger size is required please view our full range or contact our customer care team.

Arthro Tall-ette Raised Toilet Seat

Description

Arthro Tall-ette Raised Toilet Seat
The Arthro Tall-ette Raised Toilet Seat has been designed to accommodate the requirement for sitting with either leg extended. It features a cut-out section on either the left or right side as required, and affixes to the toilet to add height and increased practicality.

Indications of the Raised Toilet Seat
Due to the cut-out nature of the toilet seat, it is ideal for anybody with either temporary or ongoing injuries or conditions that require the leg to remain extended while seated. If mobility is reduced due to a condition affecting the ability of the knee to bend, then this toilet seat can provide convenient positioning.

The toilet seat can also support users whose leg may currently be immobile or broken, or with sprained muscles and therefore painful to bend. This makes it an ideal choice for such medical environments as therapy clinics and rehabilitation centres, where patients may be suffering from reduced mobility and complications resulting in the inability to properly bend the either leg.

Design Benefits
In addition to the convenience of the cut-out side, the raised toilet seat also adds a height of 140mm. This means that it enhances the ease of lowering to and rising from the toilet seat, which will be paramount for users with reduced mobility or limb pain.

The seat affixes with a Slip-in Lok-in-el bracket, securing it into place for safety. It can also be easily wiped down in between use, and cleaned thoroughly for hygiene maintenance. This is especially important both when considering personal hygiene in the home and the hygiene and safety of patients when in a medical environment.

Technical Specifications
Seat height: 140mm (5.5)
Seat weight: 1.6kg
Maximum user weight: 165kg (25.75 stone)

Ashby Raised Toilet Seat 4inch/10cm Standard

The Ashby Raised Toilet Seat 4 inch (10cm) Standard offers a simple way of minimising excessive bending and the danger of over-balancing for those with limited mobility.

This raised toilet seat can be fitted securely to any toilet in seconds as the brackets are easily adjusted by hand.

The top of the seat is shaped to distribute the user weight over a greater area. The contoured shape has the effect of holding the occupant in position. A wide frontal area allows easy access for personal cleaning.

Features of the Ashby Raised Toilet Seat 4inch/10cm Standard
Deep splash guard for maximum hygiene
Light, robust plastic, resistant to stains and odour
Dip at front facilitates personal cleaning
Incorporates lid strong to sit on
Tough hinge is easy to keep open and clean
Additional Information:
The Ashby Raised Toilet Seat is available in three different heights (5cm, 10cm and 15cm). In addition, a deluxe model is available and identical to the raised toilet seat. This elegant ergonomic design offers the extra feature of a lid to sit on when dressing in the bathroom.

Please click on the downloadable pdf file on your right for more information: /user/Ashby-Raised-Toilet-Seat-10cm.pdf (no lid)

Technical Specifications of the Ashby Raised Toilet Seat 4inch/10cm Standard
Length: 375mm
Width: 390mm
Height: 100mm
Max user weight: 190kg
Returns Policy
Please note, Ovilcare is dedicated to maintaining the highest levels of hygiene for all of its products and for this reason the Ashby Raised Toilet Seat is non-refundable and non-returnable on grounds of hygiene.

Ashby Raised Toilet Seat 6inch/15cm Standard

The Ashby Raised Toilet Seat 6 inch (15cm) Standard offers a simple way of minimising excessive bending and the danger of over-balancing for those with limited mobility.

This raised toilet seat can be fitted securely to any toilet in seconds as the brackets are easily adjusted by hand.

The top of the seat is shaped to distribute the user weight over a greater area. The contoured shape has the effect of holding the occupant in position. A wide frontal area allows easy access for personal cleaning.

Features of the Ashby Raised Toilet Seat 6inch/15cm Standard
Deep splash guard for maximum hygiene
Light, robust plastic, resistant to stains and odour
Dip at front facilitates personal cleaning
Incorporates lid strong to sit on
Tough hinge is easy to keep open and clean
Additional Information:
The Ashby Raised Toilet Seat is available in three different heights (5cm, 10cm and 15cm). In addition, a deluxe model is available and identical to the raised toilet seat. This elegant ergonomic design offers the extra feature of a lid to sit on when dressing in the bathroom.

Please click on the downloadable pdf file on your right for more information: Ashby Raised Toilet Seat 15cm (no lid)

Technical Specifications of the Ashby Raised Toilet Seat 6inch/15cm Standard
Length: 375mm
Width: 390mm
Height: 150mm
Max user weight: 190kg
Returns Policy
Please note, Health and Care is dedicated to maintaining the highest levels of hygiene for all of its products and for this reason the Ashby Raised Toilet Seat is non-refundable and non-returnable on grounds of hygiene.

Bariatric Toilet Seat

Description

Bariatric Toilet Seat
The Bariatric Toilet Seat has been designed to provide optimal seating for anybody requiring a larger seating area for using the loo. It combines comfort with an ergonomic design, and can be fitted onto most toilet frames.

Indications of the Bariatric Toilet Seat
The Bariatric Toilet Seat has been specially designed to cater to the requirements of anybody requiring a larger seating area. It is suitable for use at home where the current toilet seat does not meet these requirements.

The toilet seat is also ideal for installing in the bathrooms of clinics and medical centres. As patients may have a wide range of requirements, this toilet seat will help to accommodate some of these by offering a wider surface area, and in turn helping to reduce stress that can occur when the special requirements of patients are not met.

Design Benefits
The toilet seat features an ergonomic design that will fit in with any decor, either in a private bathroom or public toilet. It fits securely to most toilet frames, making sure that it can be utilised by as many users as necessary.

Technical Information
Seat size (W x D): 482 x 482mm (19 x 19 inches)
Aperture size (W x D): 258 x 290mm (11.5 x 10 inches)
Seat weight: 3.5kg
Maximum user weight: 381kg (16 stone)

Cefndy Super Bariatric Raised Toilet Seat

Living with limited mobility can make even the simplest of every day tasks into a challenge, one that is all the greater when it comes to more intimate tasks such as toileting. The Cefndy range of products have been designed to offer high levels of performance where it matters, allowing users to go about their daily lives with dignity and comfort. The Super Bariatric Raised Toilet Seat's height is fully adjustable making this stackable aid an excellent option for both at-home and care home applications.

Features of the Raised Toilet Seat
Seat can be easily clipped on or clipped off
Choose from free standing or floor-fixing models
Fully height adjustable
Stackable
Specifications of the Super Bariatric Raised Toilet Seat

Between Arms 800mm
Aperture (Width x Depth) 250 x 270mm
Seat Height 450 - 600mm
Seat Width 780mm
Seat Depth 460mm
Seat to Top of Arm 170mm
Seat to Top of Back 375mm
Footprint (Width x Depth) 900 x 600mm
Max User Weight 318kg /50st
Delivery
Please allow 5 - 10 working days for delivery.
The Cefndy Range

Offering high quality health care products since 1976, Cefdny offers a wide range of product options. The Raised Toilet Seat is also available in Mediatric and Bariatric models.

Comfyfoam Raised Toilet Seat

Description

Comfyfoam Raised Toilet Seat
The Comfyfoam Raised Toilet Seat is designed to add both height and comfort to an existing toilet bowl. It is easy to affix for simple yet effective use, and is made from a soft foam for added comfort.

Indications of the Toilet Seat
Due to its ease of attachment and comfortable design, the raised toilet seat is ideal for anybody looking to improve the comfort of their existing toilet. This could be due to existing conditions or ailments where sitting for any length of time can be uncomfortable and even painful, or it could be simply to provide a little more comfort in the bathroom.

The extra height of 110mm also means that the toilet seat will be easier to lower onto and rise from, as the body does not need to move as close to the ground. For anybody with reduced mobility or discomfort when bent too low, this toilet seat will be ideal.

Easy to Affix
Not only does the toilet seat combine added height and soft comfort, but it is also easy to fit. It does not require any screw fixings, and simply pushes to fit securely over most standard toilet bowls.

This means that it can be attached to the toilet in no time, ensuring that comfort can be enjoyed when it is needed most.

Optional Lid
The Comfyfoam Raised Toilet Seat is available to purchase with or without a lid. While the addition of a lid can conceal odours and help with the aesthetic of the homely bathroom, a lid-free seat may be preferred by anybody who would struggle to lift the lid in time.

The desired option can be selected from the drop-down menu at the top of the page.

Technical Specifications
Weight without lid: 1.9kg
Weight with lid: 2.2kg
Maximum user weight: 185kg (29 stone)
Overall dimensions (H x W x L): 110 x 380 x 410mm (4.5 x 15 x 16 inches)

Dania Toilet Seat With Cover

Description

Features and Benefits
The Dania range of toilet seats from Pressalit have been designed for long term use whether in the home, hospitals or other public buildings. Adjustable buffers can be rotated to fit the curves of different toilets bowls giving further stability. This durability is combined with a carefully shaped seat in order to give maximum comfort. Made from Duraplast - a strong scratch resistant material. Stainless steel hinges, polypropylene buffers. All fixings supplied.

Dimensions
Aperture: W218 X D288mm (8 1/2 x 11 1/4). Width of seat: 360mm (14). Front to Back of Seat: 420mm (16 1/2).

Weight Limit
250kg (39st)

Dania Toilet Seat With Cover - 100mm (4) With Cover

Description

Features and Benefits
The Dania range of toilet seats from Pressalit have been designed for long term use whether in the home, hospitals or other public buildings. Adjustable buffers can be rotated to fit the curves of different toilets bowls giving further stability. This durability is combined with a carefully shaped seat in order to give maximum comfort. Made from Duraplast - a strong scratch resistant material. Stainless steel hinges, polypropylene buffers. All fixings supplied.

Dimensions
Aperture: W218 X D288mm (8 1/2 x 11 1/4). Width of seat: 360mm (14). Front to Back of Seat: 420mm (16 1/2).

Weight Limit
150kg (23st)

Dania Toilet Seat With Cover - 50mm (2) With Cover

Description

Features and Benefits
The Dania range of toilet seats from Pressalit have been designed for long term use whether in the home, hospitals or other public buildings. Adjustable buffers can be rotated to fit the curves of different toilets bowls giving further stability. This durability is combined with a carefully shaped seat in order to give maximum comfort. Made from Duraplast - a strong scratch resistant material. Stainless steel hinges, polypropylene buffers. All fixings supplied.

Dimensions
Aperture: W218 X D288mm (8 1/2 x 11 1/4). Width of seat: 360mm (14). Front to Back of Seat: 420mm (16 1/2).

Weight Limit
150kg (23st)

Drive Medical - Raised Toilet Seat TSE 150

Description

 
Drive Medical - Raised Toilet Seat TSE 150
The Raised Toilet Seat TSE 150 attaches to the former seat, allowing for a non-skid, anti-slip and wiggle-proof seating. Also its vinyl-coated armrests provide added comfort and safety.

The TSE 150 is engineered to provide maximum hygiene. It is built with smooth surfaces and comes with two recesses.

Lastly, the TSE 150 will be shipped out in high-quality packaging and will come with plastic gloves for a hygienic assembly.

Technical Specifications
Width: 56cm (22)
Depth: 49cm (19)
Height: 14cm (5.5)
Weight: 5.7kg (13lb)
Capacity: 150kg (24lb)

Etac Cloo Toilet Seat Raiser Adjustable angle and height;

Description

Etac Cloo Toilet Seat Raiser
The Etac Cloo Toilet Seat Raiser is a height adjustable toilet seat raiser which combines flexibility and simplicity. The Etac Cloo Toilet Seat Raiser can be adjusted in three different heights. It can also be set with a slight forward tilt if reduced mobility in hip and knee joints restrict the ability to sit down and stand up.

The Etac Cloo Toilet Seat Raiser is available with or without arm supports. The arm supports are foldable but can be fixed in a folded down position if required. The arm supports are also detachable. The Etac Cloo Toilet Seat Raiser can be used with only one arm support if space around the toilet is limited.

Features of the Etac Cloo Toilet Seat Raiser
Easy height adjustment - To change the height, the spacers are easily assembled or disassembled without the use of any tools
Anterior - Can be set with a slight forward tilt if reduced mobility in hip and knee joints restrict the ability to sit down and stand up
Removable seat unit - Has smooth surfaces and can be easily removed without the use of tools. Easier for cleaning
Dimensions of the Etac Cloo Toilet Seat Raiser
Seat width - 40cm (15.75in)
Arm support from top of seat - 21cm (8.25in)
Total width without arm supports - 40cm (15.5in)
Total width inc arm supports - 60cm (23.5in)
Width between arm supports - 49cm (19.25in)
Weight with arms - 4.8kg (10.58lbs)
Weight without arms - 3.3kg (7.28lbs)
Max user weight - 150kg (330lbs)
Materials of the Etac Cloo Toilet Seat Raiser
Seat - Polypropylene
Attachment - Aluminium
Heightening spacers - Polyamide

Harvest 100mm Raised Toilet Seat

Description

Harvest 100mm Raised Toilet Seat
For those with limited levels of mobility, the use of a raised toilet seat may be necessary to facilitate the toileting process. The Harvest 100mm Raised Toilet Seat is designed to assist those with limited mobility, reducing the risk of injury and making entry and exit from the seat as easy and safe as possible.

Safe and Secure
This seat makes the toileting process as safe as possible by reducing the amount of bending the user needs to do to enter the seat. This reduced bending results in a lessening of the risk of over-balancing, preventing potential falls and injury. To ensure a secure fit to the toilet pan, the seat has easy-fit brackets with rubber over-moulding, meaning that it will be a perfect fit every time.

Excellent Hygiene
Toilet seats must be manufactured to be as hygienic as possible, and so this seat has been designed with a variety of easy-clean features. The one piece moulding of the seat makes for ease of cleaning, with no sharp ridges to catch debris. Anti-bacterial protection is built in to the seat, making it safe for use in both home and medical environments.

Key Features
Assists those with limited mobility
Makes toileting as simple and safe as possible
Reduces the need for bending by the patient
Lessens the risk of over-balancing
Features easy-fit brackets with rubber moulding
Provides a secure fit onto almost all toilet pans
One piece moulding for ease of cleaning
Built-in anti-bacterial protection
Dimensions: 375 x 390 x 100mm

Herdegen Non-Slip Toilet Seat Raiser Clipper 5

Description

Herdegen Non-Slip Toilet Seat Raiser Clipper 5
The Herdegen Non-Slip Toilet Seat Raiser Clipper 5 is a handy toilet seat raiser with clippers for a strong and secure fix. The Herdegen Non-Slip Toilet Seat Raiser Clipper 5 has removable armrests to facilitate lateral transfer.

The Herdegen Non-Slip Toilet Seat Raiser Clipper 5 increases the height of the toilet seat by 11 cm/4.3.

Uses of The Herdegen Non-Slip Toilet Seat Raiser Clipper 5
Increase your existing toilet seat height.
Gain balance support when sitting down/standing up from the toilet.
Increase seated comfort whilst on the toilet.
Prevent risk of falls by ensuring a safe movement.
Allow easier seated transfers by removing the armrests during the transfer.
Features of The Herdegen Non-Slip Toilet Seat Raiser Clipper 5
The toilet seat raiser with armrests and lid is placed on a standard toilet in order to raiser the height of the sear surface.
Considerably easier for disabled or elderly people with reduced mobility to get on and off the toilet.
Armrests can be removed by a push button to facilitate lateral transfers. This provides space for transfer from a wheelchair to the toilet.
The armrests can be re-attached after transfer to provide stability support whilst the user is on the toilet
Maximum user weight: 110 kg/242.5 lbs.
Most falls amongst elderly tend to happen in the bathroom. A toilet seat raiser with armrests help to provide additional balance support and may help prevent the risk of falls.
Made from injected plastic, making the Clipper 5 a rustproof toilet seat raiser with lid which is easy to clean.
How to clean The Herdegen Non-Slip Toilet Seat Raiser Clipper 5
The non-slip toilet seat raiser has to be cleaned regularly with a mild cleaning agent and a soft cloth. It may be washed with soap and water or disinfected with non-chlorinated products.

Specification
Height: 11 cm/4.3.
Total Width: 66 cm/25.9.
Total Depth: 42 cm/16.5.
Inside Dimensions: 25 cm x 21 cm/9.8 x 8.2.
Weight: 3.1 kg/6.8 lbs.
Material: Injected plastic seat.
Maximum User Weight: 110 kg/242.5 lbs.

Herdegen Non-Slip Toilet Seat Raiser Clipper 7

Description

Herdegen Non-Slip Toilet Seat Raiser Clipper 7
The Herdegen Non-Slip Toilet Seat Raiser Clipper 7 is a sturdy and secure toilet seat raiser. The Herdegen Non-Slip Toilet Seat Raiser Clipper 7 has legs, armrests and a lid for users with severely reduced mobility and stability.

The Herdegen Non-Slip Toilet Seat Raiser Clipper 7 is suitable for users with a maximum weight of 150 kg/330 lbs.

Uses of The Herdegen Non-Slip Toilet Seat Raiser Clipper 7
Increase the height of your existing toilet seat.
Improve your stability when sitting down and standing up from the toilet.
Increase your comfort whilst sitting on the toilet.
Ensure safety and prevent risk of falls.
Features of The Herdegen Non-Slip Toilet Seat Raiser Clipper 7
Placed on a standard toilet in order to raise the height of the seat surface.
Easier for disabled or elderly people with reduced mobility to get on and off the toilet.
Height adjusted by a push button to suit the individual user needs. The height adjustable function facilitates easier access whilst providing each individual user with a comfortable and safe seat.
This toilet seat raiser with legs can offer a sturdy and secure support with its steel frame and aluminium legs.
Maximum user weight limit of 150 kg/330 lbs.
Especially suitable for heavier users or for those who require additional balance support when sitting down or standing up.
Useful for people with hip replacements or for people with difficulty bending at the waist.
Most falls amongst elderly tend to happen in the bathroom, by using a sturdy and secure toilet seat raiser with legs, you can help prevent the risk of falls.
Made from injected plastic, making the Slipper 7 rustproof and easy to clean.
How to clean the The Herdegen Non-Slip Toilet Seat Raiser Clipper 7
The non-slip toilet seat raiser has to be cleaned regularly with a mild cleaning agent and a soft cloth. It may be washed with soap and water or disinfected with non-chlorinated products.

Specifications
Adjustable height: 52-65 cm/20-25.
Total width: 60 cm/23.
Total Depth: 42 cm/16.5.
Inside dimension: 25 cm x 21 cm/9.8 x 8.2.
Weight: 5.9 kg/13 lbs.
Material: Steel frame, aluminium legs, injected plastic seat.
Maximum user weight: 150 kg/330 lbs.

Homecraft Padded Raised Toilet Seat

Description

Homecraft Padded Raised Toilet Seat
The Homecraft Padded Raised Toilet Seat affixes to an existing toilet seat to offer improved comfort and increased height. It includes a vinyl covering over the soft padding that is easily wiped down, helping to ensure hygiene is not compromised for comfort.

Indications of the Toilet Seat
Anybody looking to improve the comfort of their existing toilet seat will benefit from this Homecraft toilet seat. Whether this is to ease the discomfort caused by sitting in one position for any length of time, or for reducing pain in injured or hurt limbs, the cushioning padding is ideal for improving the overall toileting experience.

The seat is also available with a height of either 50mm (2) or 100mm (4). This makes it the perfect option for anybody who finds the height of their current toilet to be too low, and will also be ideal for anybody who struggles to lower to or rise from the toilet at present, with the added height making accessing the loo much easier.

Design Benefits
Aside from the enhanced comfort this toilet seat provides, it also offers quality hygiene maintenance with its vinyl covering. This makes it easy to wipe down in between use, and allows for more thorough cleaning to reduce the spread of germs and bacteria.

The cushion easily attaches with four hook-and-loop straps, which will hold it securely in place. This means that the improved comfort can be enjoyed time and time again with the simple yet effective design of the Homecraft Padded Raised Toilet Seat.

Technical Information

Homecraft Sussex Toilet Frame

Description

Homecraft Sussex Toilet Frame
The Homecraft Sussex Toilet Frame provides a convenient and reliable support for users looking for assistance when using the toilet. It combines a steel frame and black hinged toilet seat with a sub-seat and skirt for optimal benefit.

Indications of the Sussex Toilet Frame
The Sussex Toilet Frame is ideal for anybody looking for support with lowering to and rising from the toilet. The handles at either side of the frame can be used to apply pressure or grip onto to assist with movement.

As the frame can be adjusted in height, with a range of 470mm to 640mm (18.5 to 25.25), it is ideal for a wide range of user needs. Whether looking for added support due to reduced mobility or ongoing struggles, or as an aid to maintaining independence following injury, the Sussex Toilet Frame can offer this assistance.

Easy Cleaning
Not only is this toilet frame both practical and beneficial, but it is also easy to clean. It is important that such products as toilet aids are kept clean, and that good levels of hygiene is maintained, whether used in the home or in a public bathroom. The sub-seat and skirt can be removed for thorough cleaning, and the unit can be wiped down in between use for ongoing cleaning.

Technical Specifications
Seat height: 470 to 640mm (18.5 to 25.25)
Width: 550mm (21.5)
Maximum depth: 680mm (26.75)
Aperture (LxW): 280 x 230mm (11 x 9)
Weight: 5.3kg
Maximum user weight: 125kg (19.5 stone)

Homecraft Uni-Frame Toilet Frame

Description

Homecraft Uni-Frame Toilet Frame
The Homecraft Uni-Frame Toilet Frame combines a folding frame with a one-piece plastic seat for providing optimal support during toileting. The height of the frame can be adjusted to ensure it can be positioned as suitably as possible.

Indications of the Uni-Frame Toilet Frame
The Uni-Frame Toilet Frame is ideal for anybody looking for support with lowering to and rising from the toilet. The handles at either side of the frame can be used to apply pressure or grip onto to assist with movement.

As the frame can be adjusted in height, it is ideal for a wide range of user needs. Whether looking for added support due to reduced mobility or ongoing struggles, or as an aid to maintaining independence following injury, the Uni-Frame Toilet Frame can offer this assistance.

Folding Frame
The Uni-Frame Toilet Frame is ideal for individual use in a home. However, it is also a convenient solution to providing practical support for patients in such environments as clinics and care homes, where patients and residents may require assistance.

The folding frame can be easily transported between bathrooms, providing users with the support they need without compromising their independence.

Technical Specifications
Seat height: 435 - 560mm (17 - 22)
Rail height: 620 - 745mm (24.5 - 29.25)
Dimensions (WxD): 500 x 420mm (19.5 x 16.5)
Weight: 5.1kg
Maximum user weight: 127kg (20 stone)

Invacare Aquatec 90000 Toilet Seat Raiser

Perfect for people with limited mobility, the Aquatec 90000 Toilet Seat Raiser comes with the option of three different seat heights, making it convenient for the individual user's needs. If you have trouble rising from or lowering to a standard toilet seat, the Aquatec 90000 allows an easier way to use the bathroom.

Features of the Aquatec 90000 Toilet Seat Raiser
The Aquatec 90000 enables the user to pick the right seat height to suit their needs. It is available in either a two, four or six inch seat height.

The toilet seat raiser has armrests to provide additional support for the user. This is specifically useful for transitioning between standing and sitting, there to provide a steadying aid for those who need it. The armrests are smooth and easy to grip and also have the ability to swing away, meaning they can be positioned in the best place to suit the user.

The toilet seat and lid for the Aquatec 900000 can be unclipped from the base. The seat can be detached, making it ideal for travel or moving – no tools are required to detach the seat from the base.

How Do I Use the Invacare 90000 Toilet Seat Raiser?
Full user instructions can be found in the PDF link below:

Click Here for User Instructions
Click above for user instructions
Technical Details
The Aquatec 90000 consists of the following measurements (full dimensions are below):

Seat Width: 365mm
Seat Length: 390mm
Weight: ranges from 4.4kg - 3.6kg depending on the seat depth
Available Seat Depths: 2cm, 6cm and 10cm (
The Aquatec 90000 has a load capacity of 150kg (23 stone).

Melton Sloped Raised Toilet Seats - Right Slope

Description

Features and Benefits
Specifically designed for users who cannot or who are required not to flex their hips due to surgery, injury or severe arthritis. Lower limb amputees also find the sloped seats more secure and comfortable. The cutaway can also help prevent internal rotation. Fitted to the toilet with plastic brackets, which have wing nut adjustment underneath the seat. May be autoclaved on cleaning cycles up to 80°. Available in right or left slopes.

Dimensions
Aperture size: 230 x 220mm (9 x 8 1/2). Height 100mm (4).

Weight Limit
190kg (30st)