Dementia Wander Alarms

Care Call PIR Movement Monitor

The Care Call Bed PIR Movement Monitor is an easily installed bedside/hallway monitor that ensures carers can always know about the safety of patients or loved ones.

Caring for a patient of a loved one is a full time job, and it can easily feel like the home you once felt safe in is now full of danger. A slippery floor could lead to falls, an open door is a massive risk for those prone to wandering, the stairs during the night can lead to any number of injuries, even an unlocked window could be a serious threat. Whether you are caring for one individual or work in a care environment, it can seem like you simply don't have enough eyes to make sure you are keeping your patient safe at all times. Care Call's system means that 24/7 care is as simple as a pager small enough to fit in the palm of your hand, or monitors discreetly and easily installed around your home.

Able to send an alert direct to the Care Call Pager or Signwave, the PIR Monitor is ideal for remote monitoring of young children who are likely to leave their rooms in the night or elderly patients who have a tendency to wander.

The unit can be set to a delayed programme of 5, 10 or 15 minutes so that short leaves from the bed such as for a toilet break can be acknowledged. If the individual returns to the bed within this set time period, an alert will not be sent.

Care Call: Wherever You Need It, Whenever You Need It

Care Call offers an incredible range of care alarms and has been doing so for the past 10 years. Don't let the simple, discreet design of their pager mislead you, its great many applications and range of up to 1000 metres in open air means Care Call is a leading name in care pager technology.

With DIY installation and setup the Care Call system fills the gap between expensive entry level border alarms and nurse call station systems. With 6 channels allowing a range of alert systems to be programmed, the Care Call system is ideal for the care of people with:

Alzheimer's
Mobility Problems
A tendency to fall
A tendency to wander or sleepwalk
Features of the Care Call PIR Movement Monitor

Infrared sensor the Monitor sends an alert when movement is detected in its field of view
Can be angled to cover a specific room or staircase
Swivel base allows for perfect positioning for part-monitoring of hall ways or landings
Easily mounted at the bedside to act in lieu of a pressure pad
3 non return delays of 5,10 and 15 minutes, accommodating short leaves
Easy to use
Wireless Range up to 1000m in open air
Can be used with PM5 pressure mat or Jelly bean twist switch
Automatic low battery signal sent to Pager or SignWave
Free technical helpline
1 year warranty
PIR Monitor Care Call

Care Call Signwave Receiver with Charger

Description
Care Call Signwave Receiver with Charger
The Care Call Signwave Receiver with Charger is a simple to use, ergonomically designed alert receiver that allows you to be alerted to patient movement and needs at all times.

Caring for a patient of a loved one is a full time job, and it can easily feel like the home you once felt safe in is now full of danger. A slippery floor could lead to falls, an open door is a massive risk for those prone to wandering, the stairs during the night can lead to any number of injuries, even an unlocked window could be a serious threat. Whether you are caring for one individual or work in a care environment, it can seem like you simply don't have enough eyes to make sure you are keeping your patient safe at all times. Care Call's system means that 24/7 care is as simple as a pager small enough to fit in the palm of your hand, or even smaller monitors discreetly and easily installed around your home.

The Signwave is a user friendly receiver that alerts users with an LED strobe light and loud alert which can be altered with the volume control.

The drop-in cradle allows for wireless recharging and does not disrupt the performance of the Signwave even as it's battery is recharged. Continuing to perform throughout the night, the Signwave can be connected to a Pillow Pad to ensure that you are alerted to any signal.

Care Call:, Wherever You Need It, Whenever You Need It

Care Call offers an incredible range of care alarms and has been doing so for the past 10 years. Don't let the simple, discreet design of their Signwave mislead you, its great many applications and range of up to 1000 metres in open air means Care Call is a leading name in care pager technology.

With DIY installation and setup the Care Call system fills the gap between expensive entry level border alarms and nurse call station systems. The Signwave is easily held and emits a high volume alert as well as an LED strobe so carers are alerted when patients or loved ones require assistance. Ideal for the care of people with:

Alzheimer's
Mobility Problems
A tendency to fall
A tendency to wander or sleepwalk
Features of the Care Call SignWave Receiver with Charger

Easy to use
Cancel button easily halts alert
Drop-in base for easy charging
Volume and frequency alterable to suit carer needs
Alarm level up to 90dB
Wireless Range up to 1000m in open air
Free technical helpline
LED backlit display
1 year warranty

Care Call Under Carpet Pressure Pad

The Care Call Under Carpet Pressure Pad is a thin and discreet pressure pad to place under a rug at the bedside to alert carers when patients leave their bed in the night.

Caring for a patient of a loved one is a full time job, and it can easily feel like the home you once felt safe in is now full of danger. A slippery floor could lead to falls, an open door is a massive risk for those prone to wandering, the stairs during the night can lead to any number of injuries, even an unlocked window could be a serious threat. Whether you are caring for one individual or work in a care environment, it can seem like you simply don't have enough eyes to make sure you are keeping your patient safe at all times. Care Call's system means that 24/7 care is as simple as a pager small enough to fit in the palm of your hand, or even smaller monitors discreetly and easily installed around your home.

Designed for use with a Care Call Mini Monitor, the Pressure Pad immediately alerts the Care Call Pager or SignWave when movement is detected.

Please note that a Mini Monitor is not included with purchase of the Pressure Pad.

Care Call, Wherever You Need It, Whenever You Need It

Care Call offers an incredible range of care alarms and has been doing so for the past 10 years. Don't let the simple, discreet design of their pager mislead you, its great many applications and range of up to 1000 metres in open air means Care Call is a leading name in care pager technology.

With DIY installation and setup the Care Call system fills the gap between expensive entry level border alarms and nurse call station systems. With 6 channels allowing a range of alert systems to be programmed, the Care Call system is ideal for the care of people with:

Alzheimer's
Mobility Problems
A tendency to fall
A tendency to wander or sleepwalk
Features of the Care Call Under Carpet Pressure Pad
Easy to use
For use with Care Call Monitoring systems
Slips under any rug
Free technical helpline
1 year warranty

Carephone GPS SOS Tracker Desktop Charger

Description
Carephone GPS SOS Tracker Desktop Charger
A great accessory for the GPS SOS Tracker, the Carephone GPS SOS Tracker Desktop Charger provides an extra charging solution for the Carephone GPS SOS Tracker in a stylish body.

Stylish Charging
The desktop charger provides a new and stylish way to charge your tracker, with a sleek and attractive white design that looks great anywhere. The white colour perfectly matches with any colour of tracker.

No More Messy Cables
Helping to eliminate messy cables, the desktop charger makes charging your Carephone GPS SOS Tracker easier than ever. Simply place the tracker in the charger and it'll start charging right away.

Please note: this product is for the desktop charger only and does not include a GPS SOS Tracker, which is shown for illustrative purposes only.

Door Contact Set for the Voice Alert Occupancy Monitoring Alarm System

Description
Door Contact Set for the Voice Alert Occupancy Monitoring Alarm System
Ensuring that those under your care don't become a danger to themselves by wandering when they shouldn't is incredibly important. The Door Contact Set for the Voice Alert Occupancy Monitoring Alarm System enables you to do this, alerting you when a door is opened or closed, depending on the version you choose.

This alarm is available in two versions, Open Contact or Closed Contact. Select your desired option using the drop-down menu above.

Get More From Your Existing System
The door contact set ties into an existing voice alert occupancy monitoring alarm system like the Bed Occupancy Alarm Sensor Mat System with Voice Alert and Pager or the Chair Occupancy Alarm Mat System with Voice Alert and Pager.

It detects when a door is opened or closed and triggers the voice recording in the alarm (not included) to play, which can remind them to go back into bed or to wait for you to help them, or whatever else you want it to say.

The alarm then sends a signal to your pager (not included) that lets you know that they have tried to leave their room, or a close a door that should remain open, so that you can go and help them. This set enables you to get even more from your existing system, giving you an extra level of security.

Two Versions Available
This Monitoring Alarm system is available in two versions: Normally Open Contact or Normally Closed Contact. The differences are as follows:

Normally Open Contact: This version signals an alert whenever a door is opened.
Normally Closed Contact: This version signals an alert whenever a door is closed.
Easy To Set Up
The door contact set is incredibly easy to set up. Just place one of the contacts on the door and another next to it on the door frame, plug it into the voice alarm and you're good to go.

Frequency Precision Floor Pressure Mat - Pager Linked

Description
Frequency Precision Floor Pressure Mat - Pager Linked
Wandering can be a serious problem for the elderly, Walking around unsupervised is a common cause of falls, which can cause serious injures.

The Frequency Precision Floor Pressure Mat - Pager Linked has been developed to be an incredibly reliable floor pressure mat system. The mat connects to the Frequency Precision Text Pager and the Frequency Precision Bleeper Pager, detects all kinds of pressure and alerts you wirelessly for ease of use

Detects Any Kinds of Pressure
The floor pressure mat is the ideal solution for detecting people walking around. The mat will detect when someone steps on the mat and will alert you through the pager This is ideal for keeping track of people who shouldn't step out of bed or wander around.

Placing the mat next a bed is a great solution for helping to prevent bed falls ? it enables you to come to the person's aid so that they don't become a danger to themselves. An included anti-slip layer ensures that the mat will grip well to whatever surface it's placed on.

Uses the Frequency Precision Wireless Paging System
The floor pressure mat utilises the Frequency Precision Wireless Paging System, connecting to the Frequency Precision Text Pager and the Frequency Precision Bleeper Pager.

This enables you to be notified wherever you are in a maximum 120m radius, and the Frequency Precision Range Extender helps you extend this range even more, giving you total coverage where you need it.

What's more, each sensor in the Frequency Precision Wireless Paging System can be programmed before shipping to display a specific message on the text pager's display so you can know exactly which sensor has been triggered. If you're interested in this service, call our customer services team on 020 7720 2266.

Please note: this product requires a Frequency Precision pager to work and is not a stand-alone item.

More Features and Benefits of the Frequency Precision Floor Pressure Mat
Even more features and benefits of the Frequency Precision Floor Pressure Mat are:

5 metre lead for easy positioning
Hand-glued mats for extra durability
Uses 2 x AA batteries (included) lasting approximately 3 months
No need for professional installation
Can easily be cleaned with a damp cloth and a small amount of cleaning solution
Size of the Frequency Precision Floor Pressure Mat - Pager Linked
The size dimensions of the Frequency Precision Floor Pressure Mat - Pager Linked are:

Width: 560mm
Length: 720mm
Mat thickness:5mm
The weight of the Frequency Precision Floor Pressure Mat - Pager Linked is 560g.

Please note: product images may differ from the product you receive.

Pager for the Rondish Wireless Bed Leaving Alarm Sensor Kit

Monitoring an individual and their movements can be hard. Monitoring several at once and identifying where an alarm is coming from is even harder, and may even seem like an impossible task. Thankfully, the Rondish Wireless Bed Leaving Alarm Sensor Mat Full Kit, carers will easily be able to identify where an alarm is coming from, allowing for prompt and efficient care.

Features of the Rondish Pager
This pager is compatible with the Rondish Rise Alarm Kit, adding to its efficacy and ease of use. The option between a vibration or tone alert allows the pager to be set for your individual preferences and circumstances.The LCD display identifies where an alarm is sounding from as well as providing the carer with a general system status of the pager.

The controls on the pager feature the following:

Volume control
Alarm display
Stored alarm review
With a strong belt clip for ease of attachment and operated by standard batteries, the pager is easy to use and identifies clearly where there may be an issue.

Technical details
The pager is operated by 2 x AA batteries and has a low battery warning.
Dimensions (WxHxD): 55mm x 75mm x 25mm

PIR Stand for the MPPL PIR Transmitter Stand to be used with the PIR Transmitter

Description
PIR Stand for the MPPL PIR Motion Detector
If you are using the PIR Transmitter, your options for angling the device are limited. This is due to only Velcro pads being provided to stick the transmitter to the wall. This might miss the area your are hoping to monitor with the transmitter.

By purchasing a PIR Stand for the MPPL PIR Motion Detector, you are widely opening your options.

Features of the PIR Stand for the MPPL PIR Motion Detector
The stand is designed to be free-standing. This means your PIR Transmitter does not need to be mounted onto the wall, but can be positioned wherever is ideal - on a coffee table, for example. Without attaching it to the wall, there is no concern over damaging paintwork or wallpaper either, as the Velcro dots used for attachment can cause problems with this.

POCSAG Long-Range Multi-Function Transmitter

Suitable for use with the Medpage POCSAG range of care alarm pagers, the POCSAG Long-Range Multi-Function Transmitter is ideal for use in professional care environments. It allows you to program your alarms with clear text messages, ensuring that you know where the problem is occurring.

What's Included?
1 x POCSAG Transmitter
2 x AAA Batteries
In order to use this product as part of a full alarm kit you will need a POCSAG Pager, as well as one of the following sensors:

Bed Sensor Mat, suitable for making you aware when someone leaves bed
Chair Sensor Mat, suitable for making you aware when someone leaves a chair
Easy Press Jelly Switch, suitable for use as a panic alarm for someone with communication issues
Soft Touch Panic Alarm Button, soft panic alarm, ideally suited to people with low levels of mobility/dexterity
Who Can Use the POCSAG Transmitter?
The POCSAG system is ideal for whether you're caring for an individual or multiple residents in a care home envirnment. The ability to connect it to a range of pagers allows it to meet your own individual requirements in a wide range of situations.

How Does the POCSAG Multi-Function Transitter Work?
The transmitter sends a text messages to your pager, allowing you to identify the source of the alarm. For example, you might have a person that is at risk of wandering out of a front or back door, and you can customise the alarm to say "Front Door" or "Back Door" depending on which alarm is triggered. This allows you to react more quickly to any danger and helps to ensure that the person in your care is as safe as possible.

What Is the Transmitter Range?
The transmitter can send a message to a pager from up to 400 metres. Please note that this works best when there are as few obstacles between the transmitter and pager as possible.

How Are Messages Received?
Messages are sent from the POCSAG transmitter to the POCSAG pager (sold separately here). Messages are received in text format, with pre-programmed operation models for the door sensor alarm, floor pressure mat, and bed or chair occupancy sensor. It is also possible to programme in custom messages; please contact our Customer Care team for more information about this before purchasing.

Which Jack Sockets Are Present?
There are two jack sockets present on the transmitter: one 2.5mm socket and one 3.5mm socket. This increases versatility of the transmitter, allowing you to use it in a range of situations.

How Is the Transmitter Powered?
The POCSAG transmitter requires 2 x AAA batteries. These are supplied with your purchase.

How Long Do the Batteries Last?
On average, you can expect 2 x AAA batteries to last around one year. However, this may vary depending on usage.

Technical Specifications
Input Sockets: 2.5mm and 3.5mm
Trigger Mode: N/O or N/C
FSK Transmission: 433.92MHz @ 10mW
Power: 2 x AAA batteries
Overall Dimensions (LxWxD): 145 x 40 x 22mm
Please Note: Any custom text messages must be programmed prior to delivery. If you would like a customised message for any of your POCSAG products, please speak to our Customer Care team prior to making an order.

Portable Personal GPS Tracker

Dementia can cause huge emotional stress, for both the sufferer and for their loved ones. If you care for someone with dementia, something particularly upsetting associated with the condition is the patient's tendency to wander. This puts them at risk of getting lost and hurting themselves.

The Portable Personal GPS Tracker helps you keep tabs on your patient or loved one. Using precise GPS, you can find out someone's exact location should you be concerned about their whereabouts. The clever device also features fall sensors to detect if someone has fallen to the ground, perfect for ensuring a quick response and therefore greater safety.

The multi-purpose unit can also be used to help you relocate a valuable item should it go missing or be stolen, for example you could conceal the tracker within your bike or sports equipment.

How Does the Personal Tracker Work?
The tracker links with your mobile phone to inform you of a loved one's precise location, should you need to know. Mapping coordinates are sent by request as a text to your mobile, along with details of the tracker's status and a link to Google maps.

Up to five mobile phones can be authorised to receive data from the device, meaning multiple family members can monitor one person. The Personal Tracker features a two-way audio with a talk button that will first dial the primary mobile phone, and it's also possible to dial the tracker which can be answered by the user. This allows for improved communication between patient and carer.

Features of the GPS Tracker
Works both outdoors and indoors - ideal for monitoring wandering
Can be carried by a person, stored in a vehicle, concealed in a valuable item
Connects with your mobile phone to tell you precise location, with coordinates and a link to Google maps provided
Can also indicate altitude
Device can connect with up to 5 mobile phones
Can be set to up every 10 seconds up to a maximum of every 10 minutes
Can be set to only update when the location is requested
Talk function with two-way speech to allow for easy communication between patient and carer
Motion sensors to detect falls
Can work with an SD memory card (not included) to record GPRS data history
Remote reboot
Attachment for lanyard or belt clip for easy access and portability
Technical Specification
Dimensions: 80 x 56 x 22mm
Weight: 50g
Power: 2 x 800mA batteries or provided charger with mini USB connector
Battery: 5V 100 hours standby operation from full charge
Requires network SIM card
Band: 850/900/1800/1900 Mhz
GPS chip SIRF3. GSM/GPRS module: SIM 900
GPS sensitivity: -159dBm
GPS accuracy: 5m
Additional Information
There are no monthly or ongoing costs with the GPS Tracker - all that's required is a mobile telephone network SIM card, contract or pay-as-you-go. When using GPRS, data transfer is charged by the network vendor.

Pressure Mat Transmitter for MPPL Alarms

Description
Pressure Mat Transmitter for MPPL Alarms
Suitable for use with the MPPL Bed and Chair pressure mats, the Pressure Mat Transmitter for MPPL Alarms ensures that your alarm kit is performing as it should. Connecting your sensor mat to your MPPL Pager, the transmitter ensures that you are aware if a loved one leaves a bed or chair.

Compatibility of the MPPL Transmitter
While the Medpage Transmitter is a universal device, this version is hardwired with a 2.5mm jack that makes it suitable for the following products only:

Bed Pressure Mat for MPPL and POCSAG Systems
Chair Mat for the MPPL and Pocsag Systems
The Transmitter may look the same as others within the MPPL system, but it will not be compatible with the products. Please be aware of this when you purchase the transmitter.

MPPL Transmitters for Panic Alarms
If you are looking for an MPPL Transmitter for the MPPL Panic alarms, please see the Panic Alarm Transmitter for MPPL Alarms.

Rondish Wireless Bed Leaving Alarm Sensor Mat Full Kit

It can be difficult for carers to always monitor their patients, particularly at nighttime. They may need to be taken to the toilet during the night, could fall out of bed or, if suffering from dementia, may be prone to wandering off. The more patients under your care, the more challenging it becomes to keep an eye on them all.

There are bed leaving sensor systems available which alert you if someone has left their bed, helping you know when you are needed. Typically, these are designed to monitor a single patient. But what if you work in a care home or hospital, with multiple patients in your care?

The Bed Leaving Alarm Sensor Mat Full Kit is unlike most standard bed leaving sensors in that it's capable of connecting to up to 99 different bed or chair sensors. This means you can keep tabs on a large amount of patients at once, so you won't have to be constantly checking on them all. With the Bed Leaving Sensor Kit, you can ensure you'll be alerted exactly when you're needed.

How Does the Bed Leaving Alarm Sensor Mat Full Kit Work?
The kit consists of everything you need to monitor when a patient gets out of bed. You simply place the bed sensor mat under the mattress or bed sheet at pelvis height. When the patient sits or lays down, the wireless transmitter acknowledges detection with two beeps.

When the patient leaves bed, an alarm signal is sent from the transmitter to the pager receiver, which can be attached to the carer's person using the provided belt clip to ensure they'll never miss an alert.

The carer will be signalled with sound or vibration, making it suitable for both the hearing and visually impaired. It also features a flashing LED light and will display which transmitter number is signaling. That way, if if you are monitoring multiple beds, you will know exactly which mat is being triggered so that you can quickly respond to the correct patient.

Adding Additional Mats
The kit is already set up to use with the provided sensor mat programmed as 'Number 1', but has the ability to connect with up to 99 mats on each pager. For each Additional Sensor Mat you wish to add, you must purchase an additional Wireless Transmitter to send the signal to your pager.

Additional Information
If the mattress is very thick, or the patient is of a slight build, it may be necessary to place the sensor mat on top of the mattress covered with another bed sheet, instead of underneath the mattress.

If using the sensor in conjunction with an electric blanket, then it is important the sensor goes beneath the mattress rather than beneath the sheet. Otherwise the heat might interfere with the sensor.

To ensure that the mat is functioning correctly, lie on the bed and then get up to check that the system is alerting as expected.

Key Features of the Alarm Sensor Mat Kit
Includes one bed sensor mat, wireless transmitter and pager receiver
Can connect with up to 99 bed sensor mats (only one included) to monitor multiple patients at once
Pager emits sound, vibration or combination of both to alert carer to patient leaving bed
Also has a flashing LED light, and displays/speaks the transmitter number so you know exactly which patient has left bed
Language button - can change the language of the spoken mat identification number, automatically set to English
Adjustable volume
Smart function - enables you to review the last 6 alarm calls
Low battery warning indicated by flashing LED
Pager has a belt clip so can be easily attached to person
Can also be placed in pocket or on a surface
Optional 15 minute alarm delay - allows patient to go to the toilet without triggering alarm, but will alert you if they have not returned to bed after 15 minutes
Can alternatively set device to alert you immediately
Reset button so you can reset the alarm once triggered
Pad lost warning light to alert you if sensor mat is not located by the system
Call button for panic alert or assistance alert
The transmitter has a connection port for the connection jack of the sensor mat to plug into - wire protection fitting protects the wire jack if the cable is pulled or yanked
Transmitter can be fixed to the wall or flat surface using the included two wall fixing housings
Technical Specifications
Dimensions (transmitter): 12cm tall, 7.7cm wide, 2.7cm thick
Dimensions (pager): 6.8cm tall, 8.5cm wide, 2.6cm thick (3.8cm thick if including belt clip)
Dimensions (sensor mat): 77cm long (85cm long if including cable protection housing), 51cm wide, less than 1cm thick
Cable length: approx. 205cm
Operating range: 100m (with clear line of sight)
9V 200mA adapter port (for mains operation - mains adapter sold separately)

Silent Alert SA3000 Hard of Hearing Magnetic Door Monitor

Description
VAT Relief
Silent Alert SA3000 Hard of Hearing Magnetic Door Monitor
Life for the hard of hearing can be difficult, especially in their home. Not being able to hear what's going on in your home is a daunting prospect.

The Silent Alert SA3000 Hard of Hearing Magnetic Door Monitor is a fantastic solution to this problem, and enables you to be told when someone opens a door somewhere in your home. It's also useful for people caring for the elderly, as it allows them to know when people are walking around.

Opening Doors for Home Awareness
Because it connects to the Silent Alert SA3000 system, the Silent Alert SA3000 Hard of Hearing Magnetic Door Monitor will immediately let you know if someone opens a specific door. It can even be used on windows.

This means that it can be used both by those caring for people who may wander and by the hard of hearing who want a greater knowledge of what's going on in their home.

The 1000 metre max range means that it doesn't matter where you are in your home, the Silent Alert SA3000 Hard of Hearing Magnetic Door Monitor can still let you know that someone is moving about.

More Features of the Silent Alert SA3000 Hard of Hearing Magnetic Door Monitor
Easy to fit and simple to use
No external power source needed - uses batteries (not included)
Discreet and minimal design
Please note: the Silent Alert SA3000 Hard of Hearing Magnetic Door Monitor comes alone and requires the Silent Alert SA3000 Hard of Hearing Pager to function correctly.

Silent Alert SA3000 Hard of Hearing Mini Monitor for Under Carpet Pressure Pad

Description
VAT Relief
Silent Alert SA3000 Hard of Hearing Mini Monitor for Under Carpet Pressure Pad
Life for the hard of hearing can be difficult, especially in their home. Not being able to hear what's going on in your home is a daunting prospect.

The Silent Alert SA3000 Hard of Hearing Mini Monitor for Under Carpet Pressure Pad is a fantastic solution to this problem, and enables you to be told when someone walks over the Silent Alert SA3000 Under Carpet Pressure Pad.

A Multitude Of Uses
Because it connects to the Silent Alert SA3000 system, the Silent Alert SA3000 Hard of Hearing Mini Monitor for Under Carpet Pressure Pad will immediately let you know if someone walks over the Silent Alert Under Carpet Pressure Pad.

And because it detects movement, it can have a wide variety of uses, for example as a bed leaving alarm for elderly people, or to let you know that your teenage child has left their room in the middle of the night.

The 1000 metre max range means that it doesn't matter where you are in your home, the Silent Alert SA3000 Hard of Hearing Mini Monitor for Under Carpet Pressure Pad can still let you know that someone is moving about.

More Features of the Silent Alert SA3000 Hard of Hearing Mini Monitor for Under Carpet Pressure Pad
Easy to fit and simple to use
Lead included for extra positioning options
Minimalist design for discreet use
Please note: the Silent Alert SA3000 Hard of Hearing Mini Monitor for Under Carpet Pressure Pad comes alone and requires the Silent Alert SA3000 Under Carpet Pressure Pad and the Silent Alert SA3000 Hard of Hearing Pager to function correctly.

Silent Alert SA3000 Hard of Hearing Movement Monitor

Description
VAT Relief
Silent Alert SA3000 Hard of Hearing Movement Monitor
Life for the hard of hearing can be difficult, especially in their home. Not being able to hear what's going on in your home is a daunting prospect.

The Silent Alert SA3000 Hard of Hearing Movement Monitor is a fantastic solution to this problem, and enables you to be told when there is movement in certain area of your home.

A Multitude Of Uses
Because it connects to the Silent Alert SA3000 system, the Silent Alert SA3000 Hard of Hearing Movement Monitor will immediately let you know if it picks up movement. It uses an infrared sensor, which means that it's incredibly sensitive to movement.

The movement return delay can be set to 5, 10 or 15 minutes, so that you can be sure it's not a false alarm (for example if the person has just woken up to go to the toilet or to get a drink).

Not just ideal for elderly loved ones with a tendency to wander, the Movement Monitor has just as much application in childcare, insuring children don't leave their rooms during the night.

Just set up the Silent Alert SA3000 Hard of Hearing Movement Monitor in the best place to pick up the movement and your Silent Alert SA3000 Hard of Hearing Pager will automatically vibrate when it picks up.

And the 1000 metre max range means that it doesn't matter where you are in your home, the Silent Alert SA3000 Hard of Hearing Movement Monitor can still let you know that someone is moving about.

More Features of the Silent Alert SA3000 Hard of Hearing Movement Monitor
Can be disabled when not needed
Can also be configured to detect sound
Swivel base for perfect positioning
Minimalist design for discreet use
Mains adapter included
Please note: the Silent Alert SA3000 Hard of Hearing Movement Monitor comes alone and requires the Silent Alert SA3000 Hard of Hearing Pager to function correctly.

Silent Alert SA3000 Hard of Hearing Under Carpet Pressure Pad

Description
VAT Relief
Silent Alert SA3000 Hard of Hearing Under Carpet Pressure Pad
Life for the hard of hearing can be difficult, especially around the home. Hearing the doorbell or the telephone, the burglar alarm, or more crucially, the fire alarm, is something that is easily taken for granted. Being aware of loved ones moving around your home, especially elderly and frail relatives during the night, can be a huge challenge for any family and can feel like it requires you to have a spare set of eyes! The Silent Alert SA3000 Hard of Hearing Under Carpet Pressure Pad is a fantastic solution to this problem, and enables you to be told when someone steps onto it, when placed by a bedside it makes an excellent alert system for night time wandering.

A Multitude Of Uses
Because it connects to the Silent Alert SA3000 system, the Silent Alert SA3000 Hard of Hearing Under Carpet Pressure Pad will immediately let you know if someone walks on it, when used with the Silent Alert SA3000 Hard of Hearing Mini Monitor for Under Carpet Pressure Pad.

And because it detects movement, it can have a wide variety of uses, for example as a bed leaving alarm for elderly people, or to let you know that your child has left their room in the middle of the night.

The 1000 metre max range means that it doesn't matter where you are in your home, the Silent Alert SA3000 Hard of Hearing Under Carpet Pressure Pad can still let you know that someone is moving about.

More Features of the Silent Alert SA3000 Hard of Hearing Under Carpet Pressure Pad
Easy to fit and simple to use
Lead included for extra positioning options
Easily hides away under carpets
Please note: the Silent Alert SA3000 Hard of Hearing Under Carpet Pressure Pad comes alone and requires the Silent Alert SA3000 Hard of Hearing Mini Monitor for Under Carpet Pressure Pad and the Silent Alert SA3000 Hard of Hearing Pager to function correctly.

SSD Anti-Tamper Control Unit

Description
SSD Anti-Tamper Control Unit
Caring for patients who are vulnerable or prone to falls is hard work. You cannot have eyes and ears everywhere, but must monitor their movements to help prevent falls and injuries. An ideal way of achieving this is through the use of either the SSD Anti-Tamper Bed/Chair Exit Alarm or the SSD Anti-Tamper Floor Sensor Mat.

If you require either an additional control unit or wish to replace your existing one, you do not necessarily want to purchase new mats as well. The SSD Anti-Tamper Control Unit is available separately and comes with a magnet cord to alert the carer if the patient moves away from the unit.

Features of the SSD Anti-Tamper Control Unit
The controller works in three different modes:

With a chair/bed sensor mat
With a floor sensor mat
With the magnetic clip
The mats work on the weight transference of the patient. The magnetic clip attaches to the patient's clothes and then is pulled away when they try and move away from the sensor unaided, sounding the alarm and alerting the carer to the movement.

The controller can work either as a stand alone system or be integrated into a pre-existing nurse call system. The correct lead must be obtained to connect to the system so it is important to state which system you are using when checking out.

What the Kit Contains
Purchasing the control unit does not just come with one control unit. The following are provided in the kit:

Anti-Tamper Fall Prevention Controller
Remote control reset fob
Reset key
Wall mounting bracket
Bed mounting bracket
Magnetic Clip
4 x AA Batteries.
Please Note: The bed, chair and floor mats are not provided in this kit. For the controller to operate in different modes, they are required.

SSD Anti-Tamper Floor Sensor Alarm

Anti-Tamper Floor Sensor Mat
When caring for an elderly or vulnerable person, it is important to monitor their movements to help prevent - or react to - falls and the injuries. But it can be hard to have eyes everywhere, especially when working in a care home environment.

With the Anti-Tamper Floor Sensor Mat, you can be alerted when the person tries to move on their own accord and react to the situation. This helps prevent falls and injuries, statistics that care homes are keen to keep down.

Features of the Anti-Tamper Floor Sensor Mat
The floor mat is designed to help prevent falls by sounding an alarm as soon as the person moves, allowing assistance to reach them before they take another step. The mat is designed to trigger the alarm as soon as the person steps onto or applies weight to the sensor.

The alarm can either be an audible one if the system is being used as a stand-alone one, or can be connected into a nurse call system with an connector lead (not supplied). If it is wired into the system, then the alarm will be silent. The alarm can also be sent directly to a staff's pager for an instant alert if required.

The option between an instant alarm or a two second delay helps to minimise the risk of false alarms. This means that a person can shift their weight without sounding the alarm, but cannot move further than that.

The alarm can only be reset by the use of either the handset or the reset key. This prevents the patient from resetting the alarm themselves while still being at risk of a fall. A suspended alarm option can be accessed via the remote control so the staff can assist the patient without setting off the alarm, giving them a two minute window to work in.

Technical Details
The heavy duty floor sensor mat measures 900 x 600mm.

The alarm is operated by 4 x AA batteries, which are provided with the kit.

Alert-It P137 Alarm Pager

Alert-It P137 Alarm Pager

The Alert-It P137 Alarm Pager is more than a pager, it is a complete Nurse Call Station in your pocket.

Able to monitor the status of up to 32 Alert-it alarm modules (nodes) using the Safelink radio protocol, within a range of up to 450m. Each alarm node can be allocated the client?s name and alarms are prioritised on the basis of 4 severity levels, with a different tone sequence for each. The pager can also warn of any breakdown in the radio communication link, before a client is left at risk.

It is also possible to turn any node into a ?wander? alarm, suitable for clients with Alzheimer's or Dementia. The pager will then warn if the clients moves outside a preset area by noting a drop in the radio signal strength.

Features of the Alert-It P137 Alarm Pager
Monitor up to 32 modules
450 metre range
Able to be programmed to differentiate between different patient alerts
Alerts carer to break down in radio communication
Back lit display
Silent vibrate mode
Power save mode allows for over 80 hours of operation
Beacon displays current status of alarm
Powered by 2 rechargeable AA cells, charger included
Fast charge mode

Alert-It Bed/Chair Vacation Monitor Radio

Description
Alert-It Bed/Chair Vacation Monitor Radio
The Alert-It Bed Chair Vacation Monitor Radio is designed to work with a range of Bed/Chair Occupancy sensors.

The perfect remote way of alerting carers to patients who are prone to wandering or falls, the Bed/Chair Vacation Monitor automatically triggers an alert when the patient moves from the bed or chair.

Signalling to a pager or telephone dialler over a range of 450 metres outdoors, the unit is battery powered and compact to easy transport or installation.

Features of the Alert-It Bed/Chair Vacation Monitor Radio

Able to monitor movement of bed or chairs
Remote monitoring of patients prone to trips, falls or wandering
Instant alert or delayed alarm modes to allow for short periods of absence i.e. bathroom visits (6 minute delay)
Can be programmed to alert the carer after 2 hours on inactivity, so that the patient can be moved
Temperature-aware mode allows for an alarm to be sent when sustained high or low temperatures are detected ie. fire or hypothermia risks
450 metre radio range
Call button sends instant alerts
Powered with 2 x AA batteries
Typical battery life of 1 year, with low battery warning sent to the pager
Easily cleaned with disinfectant wipes, solution or mild detergent

Additional Sensor Mat for Rondish Wireless Bed Leaving Alarm Kit

It can be difficult to monitor a disabled or elderly patient during the night, particularly if they are prone to wandering. It becomes harder still if you are caring for several people at once, and cannot always give everyone your full attention.

The Bed Leaving Alarm Sensor Mat Full Kit helps carers by alerting them if someone has left their bed. Able to connect with up to 99 different bed sensors, you can monitor numerous patients at once, ensuring you will always know if anyone is out of bed and at risk of harm.

You may, therefore, require an Additional Sensor Mat with your Bed Leaving Alarm Kit, for example if you are using the system in a care home. This enables you to increase your awareness to other patients, so that everyone can benefit from the security it provides.

It's important to regularly clean your sensor mats to minimise infection, and the additional mat also helps with this, allowing you to still use the system whilst the original mat is being cleaned.

How Does the Additional Bed Mat Work?
The additional mat connects to your existing Bed Leaving System, able to alert your pager should the occupant leave their bed. You simply place the sensor mat under the mattress or bed sheet of the patient. When they lay down, the monitor transmitter acknowledges detection with two beeps. Then, if the patient leaves their bed, an alarm is transmitted to your existing pager to notify you with sound and vibration signals.

How to Add an Additional Mat
You can add up to 99 mats to your system, allowing you to monitor a large amount of patients at once, perfect for use in a care home or hospital. For each Additional Sensor Mat you wish to add, you must purchase an additional Wireless Transmitter to send the signal to your pager.

Features of the Sensor Mat for Bed Leaving Alarm Kit
For use with your Bed Leaving Alarm Sensor Mat Kit
Easy to set up
Made from high quality polyvinyl
15 minute alarm delay option - allows patient to go to the toilet without triggering alarm, but will alert you if they have not returned to bed after 15 minutes
Can alternatively set device to alert you immediately
Requires an extra Rondish Wireless Transmitter for each additional mat
Technical Specifications
Dimensions (LxW): 77cm x 51cm/30" x 20"
Lead length: 2m
Operating range: 100m (with clear line of sight)
Material: polyvinyl

Pressure Mat with Transmitter for MPPL Home Care Alarm System - Money Off!

Pressure Mat with Transmitter for Home Care Alarm System
It can be difficult to always monitor an elderly patient closely, particularly if they suffer from dementia and may be prone to wandering off. Whilst during the day you are more able to give them your full attention, it can be a different story at night. You just want to ensure that your patient or loved one is safe, without sacrificing your sleep and their privacy by gluing yourself to their side all night long.

The Pressure Mat with Transmitter alerts you if your patient has left a room. Activated by pressure, the mat sits under a door mat or rug, and works with your existing MPPL receiver to help you keep tabs on someone in your care. Therefore, you can sleep a little easier knowing you'll be the first to know if your patient or loved one is at risk of getting lost or harming themselves, even if you are on the other side of the house.

Money Saving Offer
This product is of a slightly out-dated design and, in light of this fact, we are offering the affected stock at a discounted price of £64.99. Please note that this item works as advertised and is compatible with newer items. Only available while stocks last!

How Does the Pressure Mat with Transmitter Work?
The Pressure Mat with Transmitter is really easy to set-up and use: simply place the mat on the floor of your desired location. This might be next to the bed of your elderly loved one to monitor when they get out of bed, or by the front door to ensure you'll be alerted should they leave the house.

The Pressure Mat should be placed underneath a standard rug or mat to prevent slipping and obstruction; this also makes the appearance more discreet.

If the mat is walked on, the pressure will trigger a signal to the included transmitter, which will then alert your existing MPPL pager receiver. That way, you can monitor the movements of someone you care for more closely, without any intrusive additions to furniture or the wider room.

Features of the Pressure Mat with Transmitter
The EasyLink Pressure Mat with Transmitter with Radio Alarm Receivers hosts a range of features for effective performance:

Includes 1 x pressure mat and 1 x transmitter
Detects movement when walked on - perfect monitoring someone with dementia prone to wandering
Low battery mode on transmitter so you won't be caught without power
Expandable to up to 8 other transmitters
LED illumination when transmitter is emitting a signal for use at night
Signal receivable up to 120 metres
Quick and easy to install
Technical Specifications
Dimensions (transmitter): 137mm x 38mm x 22mm
Dimensions (mat): 750mm x 540mm
Dimensions (mat lead): 3m
Please note: the MPPL pager is not included with this product.

Long Range Door Contact Transmitter for POCSAG Pager

Description
Long Range Door Contact Transmitter for POCSAG Pager
If you are using the Long Range Door Alarm with Pager system, you know your mind can be set at ease by the 400m range alerting you to the door being opened. But the problem lies with having more than one door. How can you be alerted when other exits are used?

With the Long Range Door Contact Transmitter for POCSAG Pager you can do so easily.The pagers can be used with any number of transmitters so any door or window can be alarmed. When the contact separates, a message is sent to the pager informing you. With the individual transmitter, you can purchase as many as you need and they will all connect to the same pager.

Features of the Long Range Door Contact Transmitter for POCSAG Pager
The transmitter has a long range of up to 400m and connects with the POCSAG Pager.

Simple to both install and use, the transmitter and the magnet have markings on them to show where they should be lined up. Ideally, the transmitter is best on the door frame and the magnet on the door so it is not damaged through the opening and closing of the door. However, individual situations must be taken into account and the parts secured where they are safest.

There is only an on/off switch present for ease of use. When the contact between the transmitter and the magnet is broken and the two part further than 1cm, a personalised message will be sent to the pager informing which exit is being used. Suitable for either windows or doors.

The transmitter is run off a 3V Lithium battery that is designed to last for the lifetime of the product and is supplied.

Long Range Door Alarm Transmitter with POCSAG Pager

Description
Long Range Door Alarm Transmitter with POCSAG Pager
If there are members of your family prone to wandering, it is important to have alarms on the doors and windows so you are alerted if they leave. The issue is the range. It is even more dangerous to believe you have the doors alarmed and then to move out of range so you never receive the warning for you will not be on your guard. Your loved one could be out the door and down the road and you wouldn't even know it.

With the Long Range Door Alarm Transmitter with POCSAG Pager, you do not have to worry about that. With a range of up to 400m, the transmitter sends a personalised message to the pager, informing you not only that a door has opened, but which door it is. This means you can be alerted swiftly to precisely which exit point has been used and react accordingly. The long range not only extends the distance but makes it more beneficial in buildings with thick walls or other levels of interference.

Features of the Long Range Door Alarm
The compact transmitter is simple to use due to only an on/off switch being present. There are marks on both the transmitter and the magnet to indicate how they should be lined up. The ideal positioning is to have the magnet on the door and the transmitter on the door-frame so it is not damaged through the opening and closing of the door. However, individual situations must be taken into account and it should be positioned in the best place for you. The transmitter is powered by a 3V Lithium battery.

Features of the POCSAG Pager
Powered by one AAA battery (included)
A personalised message is sent to the pager when the alarm is activated
Each pager can be connected to a number of transmitters, each with a personalised message
A number of doors can have transmitters so you can monitor all exits with only one pager
Please Note: Message personalisation can only be done with us, to order your transmitter with a pre-programmed message, please call us on 020 7720 2266. The default pre-programmed message is "Door Alarm".

Control Box for Harvest Pressure Pads

Harvest Vigilant Seat and Mattress Pressure Pads are excellent tools to help reduce the likelihood of patient falls and injury, and connect into nurse call systems to alert carers of activity. This Control Box allows the pads to work as a standalone kit, alerting carers without the use of a nurse call system.

Standalone Fall Reduction System
With this Control Box, Harvest Pressure Pads will be able to function without access to a nurse call system, making them suitable for use in smaller care environments. Excellent for home care and small care homes, this Control Box makes your Pressure Pad much more versatile and adaptable.

Compatibility Information
This Control Box is suitable for use with the following Harvest Pressure Pads:

Harvest Vigilant Seat Pressure Pad Alarm System
Harvest Vigilant Mattress Pressure Pad Alarm System

Bed Occupancy Alarm Sensor Mat System With Voice Alert And Pager

People can become disorientated and confused rising from bed in the middle of the night. Patients who leave their beds unaided can suffer falls or wanderings without anyone being aware that they are even awake. Whether you want to make sure a patient does not leave their bed, or that they remember their walking aid when they do, the Bed Occupancy Alarm Sensor Mat System with Voice Alert and Pager allows you to personally assist them without being present.

A unique way of assuring elderly patients or loved ones, the Voice Alert allows your pre-recorded spoken message to be played when movement from the bed is detected. The voice message is entirely of your choosing; a reminder, a request or even spoken in a foreign language, and offers 15 seconds of recording time.

Provided with a bed sensor to trigger the message playback when movement from the bed is detected and a pager to receive the alert, everything you need to make sure your loved ones are kept safe is included in this fantastic care alarm package.

Features of the Bed Sensor, Voice Alert and Pager
Ready to use straight out of the box
Voice sensor and pager batteries included
Supplied with slot-in stand for easy mounting
Recording triggered when movement from the bed is detected
Repeats for 5 minutes before going into power saving mode
If pressure is re-applied, voice message halts and monitor resets
Clear reset button for one-press recording cancellation
Tone only or silent options on Voice Alert
15 minute delay alarm option to accommodate bathroom visits etc.
Low battery signalled by neon blue flash every 3 hours, repeated for 2 weeks before battery failure
Pager low battery alert signalled by red flashing LED, repeated every 2 weeks before battery failure
PAD (alert when pressure is removed, ideal for beds)/PIR (alert when pressure comes on, ideal for floor mats) options
Anti-tamper panel screws in place
Thin and lightweight Bed Sensor detects movement from bed
Supplied with 3xAAA batteries, already installed
Voice Alert and pager compatible with other sensors including the PIR movement and Door/Window sensor
Specifications of the Bed Sensor, Voice Alert and Pager
Pad Transmitter
Length 750mm -
Height - 125mm
Width 450mm 75mm
Depth - 25mm
There is also an option of a nurse call relay output if being used in a care home.

PIR Motion Sensor and Voice Alert Alarm System

Description
PIR Motion Sensor and Voice Alert Monitoring Alarm System
Ensuring that those under your care don't become a danger to themselves by wandering when they shouldn't is incredibly important. The PIR Motion Sensor and Voice Alert Monitoring Alarm System enables you to do this.

What's Included?
1 x PIR Motion Sensor
1 x Voice Alert
1 x 300mm Connecting Lead
1 x 3-Metre Connecting Lead
Remind and Reassure
The PIR motion sensor detects movement in a certain area and triggers the voice recording in the alarm to play, which can remind them to go back into bed or to wait for you to help them, or whatever else you want it to say.

You can record your own message into the voice alert, enabling you to remind them not to go outside or into a certain room or cupboard. Hearing a familiar voice helps to reassure the individual and makes them more likely to listen to the message.

Easy To Set Up
The PIR motion sensor is incredibly easy to set up. It's mounted on a swivel, which means you have a huge variety in positioning it in the room to best detect movement. Simply place it where you need it to be placed, plug the lead from the sensor into the voice alarm and you're good to go.

Expandable System
The monitoring alarm system is expandable in a range of different ways. For example, an MPPL Home Care Alarm System Pager (sold separately) can be connected to the voice alert alarm, enabling you to be notified in the home if the person under your care moves where they shouldn't.

Battery Operated
As the PIR Motion Sensor is battery operated, it still works even in the event of a powercut. This also means that it doesn't need to be situated next to a mains socket for it to work.

Medpage Micro GPS Location Tracker and Fall Sensor

The Medpage Micro GPS Location Tracker and Fall Sensor is the ultimate companion for elderly or vulnerable people. It provides confidence to those who may be vulnerable by ensuring they can always be found, through GPS tracking that can be accessed by carers' and guardians' phones to give them peace of mind. Extremely light and compact, it can be attached to keys, worn on a lanyard (included) or slipped into a bag or pocket.

Controlled Independence
The Micro GPS Location Tracker allows your elderly relatives some independence without leaving them feeling completely alone. Having this device on them will give you the ability to remotely track their location straight to your phone, including a setting that lets you know when they leave the house. It is ideal for those who worry about a patient wandering off or for those who have elderly relatives with dementia who cannot always be closely monitored.

What Do I Need to Use the Micro GPS?
Whereas some GPS location trackers require you to be part of a service, the Medpage Micro Location Tracker requires only that you have a pay-as-you-go SIM card installed into the device. The tracker is compatible with all networks and can also link to Wi-Fi for additional functionality.

Features and Benefits of the Micro GPS Location Tracker
GPS location accurate to 15m
Indoor location tracking via Wi-Fi detection
Two-Way mobile voice calling
Caller 'White List' to prevent annoyance calls
Fall detection sensors
Fall activation warning with button cancel
Journey history review (free service)
SOS contact button that sends location text to emergency contact list and or voice call
Set remote alarm reminders via Smartphone app
Link to home Wi-Fi for leaving home alert
Store up to 5 emergency contact numbers
Up to 72-hour battery standby
Wander detection alarm when leaving the home
Low SIM credit warning
Tracker battery status monitor via Smartphone app
Attach to keys, wear with lanyard (included) or slip in a bag or pocket
SOS Call Button and Fall Detection
At a push of a button, the vulnerable person can send their location via text or a distress call can be made. The two-way voice calling system allows the carer and user to communicate with each other in real-time.

This device also has the added benefit of a fall sensor that is activated when it detects falls or crashing movements. If this is a false alarm, for example if the user has just dropped the device, they can quickly cancel the warning to prevent a message from being sent out.

Technical Specifications
Dimensions: 38 x 38 x 12mm
Weight (including battery): 24g
Splash-proof to IP57
Requires SIM card (not included)

Door And Window Contact Sensor For Home Care Alarm System

One of the biggest dangers that comes with patients who are prone to wandering is not knowing they have left the premises. Patients can be crafty; they might not chose the front door as their exit route and it can be hard to keep your eye on all of the potential exits, especially when working within a care home environment. The Door and Window Transmitter Kit,can give you eyes on every door and window, alerting you the moment they are opened.

With the potential to monitor eight separate sites, these Contact Sensors can expand your monitoring capabilities even across a large premises. The sensors are easily attached to a door or window frame and come ready to use straight out of the box.

Features of the Door and Window Contact Sensor
Two-part sensor kit, magnet should be no further than 1cm away from the sensor
Arrives with batteries and ready for use
Supplied with Velcro dots for easy installation
Will alert pager when door or window is opened
LED Light appears red when movement is detected
Low battery alert will be sent for 2 weeks before battery failure
Ideal for doors, windows, fridges, shed doors, fire escapes etc.
100 metre range between transmitter and pager
Up to eight transmitters can be used with a single pager
Please note: The seal on the 9 volt battery must be removed before first use, failure to do so will prevent the monitor from working. The velcro dots supplied for mounting will damage wallpaper and paint when removed.

Can I Use the Door and Window Contact Sensor with My Door?
The Door and Window Contact Sensor features a design that is suitable for most doorways, however for certain doors where there is little room around the frame, it may not be suitable. In these cases, we would recommend using a PIR Motion Detector as an alternative from the same system.

Can I Use This Sensor with My Existing Pager?
Yes, you can pair this sensor to your existing pager. Up to 8 sensors can be paired to each pager.

Dimensions of the Door And Window Contact Sensor For Home Care Alarm System
Size: 137mm x 38mm x 22mm
This listing is for the Contact Sensor pictured only and is not supplied with a corresponding pager

Chair Occupancy Alarm Mat System with Voice Alert and Pager

The Chair Occupancy Alarm Mat System with Voice Alert and Pager has been designed to monitor and assist a person who requires help when leaving a chair. Not only are you alerted instantly that the person is rising from their chair, but you are also able to pre-record a reassuring voice message that will play to the patient or loved one as soon as they get up.

What's Included?
1 x CTM-3 Voice Alarm
1 x MPPL Pager
1 x CT2 Chair Mat
This is a full system comprising everything you need for chair occupancy monitoring, including the batteries required for operation. This allows you to set everything up quickly and easily without worrying about having to obtain additional parts.

Who Can Use the Voice Alert System?
The voice alert system is ideal for many care situations, both at home and in professional care. Examples of situations include, but are not limited to, the following:

Helping someone who is unsteady on their feet
Monitoring someone prone to wandering
Assisting someone who may require assistance when they get up to go to the toilet
Monitoring a person who could be a danger to themselves or others if they get out of their chair
Making sure that if someone has returned to their chair safely after a toilet break or short walk
How Does the Alarm Mat System Work?
The chair pressure mat is placed under the cushion of the chair, and this is then connected to the transmitter, which is also the voice alarm. When the mat detects that the user has left the chair, an alert is transmitted to the pager so that you can assist if necessary. A voice alert can also be emitted at the point of transition; see below for more information.

How Does the Voice Alert Work?
With the voice alarm, you can record a voice message, and whenever the patient tries to leave their chair it will play the message. This helps to reassure them that help is on the way soon, and can also serve as a reminder for them to take their walking aid or emergency call pendant with them.

How Comfortable Is the Chair Mat?
The chair mat is incredibly thin, which means that it isn't noticeable or uncomfortable under the chair. It can be placed underneath the cushion out of the way.

Will the MPPL Pager Work in My House?
For certain properties, such as older houses with thicker walls, you may find that the range of your MPPL device is reduced. To counter this, we recommend using the MPPL Pager Alarms Signal Repeater and Booster, which can be used to expand the operating range of your product.

Delay Feature for Bathroom Visits
The Occupancy Alarm Kit features a delay function that can be programmed to send an alert to the pager if the chair has been unoccupied for up to 15 minutes. This is great if an individual in your care can go to the bathroom on their own but should not be wandering for too long on their own.

Technical Specifications:
Pager Dimensions (WxHxD): 6 x 9 x 3.5cm
Transmitter Dimensions (WxHxD): 7.25 x 2 x 2.6cm
Sensor Mat Dimensions (WxLxD): 26 x 30 x 6cm

PIR Motion Sensor for the Voice Alert Occupancy System

Description
PIR Motion Sensor for the Voice Alert Alarm System
Ensuring that those under your care don't become a danger to themselves by wandering when they shouldn't is incredibly important. The PIR Motion Sensor for the Voice Alert Alarm System enables you to do this.

Get More From Your Existing System
The motion sensor ties into an existing voice alert occupancy monitoring alarm system like the Bed Occupancy Alarm Sensor Mat System With Voice Alert And Pager or the Chair Occupancy Alarm Mat System With Voice Alert And Pager.

It detects movement in a certain area and triggers the voice recording in the alarm (not included) to play, which can remind them to go back into bed or to wait for you to help them, or whatever else you want it to say.

The alarm then sends a signal to your pager (not included) which lets you know that they have tried to leave their room, so that you can go and help them. This set enables you to get even more from your existing system, giving you an extra level of security.

Easy To Set Up
The PIR motion sensor is incredibly easy to set up. It's mounted on a swivel, which means you have a huge variety in positioning it in the room to best detect movement. Simply place it where you need it to be placed, plug the lead into the voice alarm and you're good to go.

Alerta Deluxe Alertamat Pressure Alarm Mat

Whether caring for someone at risk of falling out of bed, or a patient with dementia prone to wandering unattended, its crucial to have an alarm system that lets you give the appropriate care as soon as possible. The Alerta Floor Alertamat Pressure Alarm Mat is the perfect tool for this, as it is a reliable and cost effective way to be immediately notified of falls or patient wandering.

Stylish and Discreet
The Alerta Deluxe Alertamat is the first and only genuine carpeted fall prevention mat, designed to blend in with any existing room theme. Available in four colours (red, blue, rust and grey), the Alerta Deluxe lets you choose the perfect style to provide a distinguished look to your patient's care environment. This discreet styling makes this mat the perfect solution for situations where a patient with dementia would otherwise avoid the mat.

Plug and Play

The original, durable and long lasting floor pressure mat, the Alertamat Deluxe is designed with a simple 'plug and play' system, which allows the care giver quick and easy set up in any hospital or care home scenario. Featuring a choice of a variety of plugs to make it compatible with any nurse call system, the Alertamat Deluxe will be up and running immediately, and operating with ease.

Effective Use
The Alertamat Deluxe Pressure Alarm Mat is most effective when placed directly at the bedside or in the doorway, so that any fall out of bed or attempt to wander is immediately indicated to the nursing or care staff. The moment the patient stands or falls onto the Alertamat, it will instantly activate the nurse call system, allowing the caregiver to quickly check the patient's safety in a prompt fashion.

Full Coverage
One of the unique features of the Alertamat Deluxe compared to other pressure alarm mats is its patent pending additional 6" lead, which allows multiple Alertamats to be connected together for greater coverage of the surrounded space. This ability provides caregivers with more flexibility and options when forming a specific "fall prevention programme" for their patient.

This lead can also be connected to an Alerta Call system, which can provide the patient with reassurance that their care needs will be tended to. These features, along with the Alertamat's large size which prevents overstepping by the patient, make Alertamat Deluxe the ultimate solution for the prevention of patient falls and wandering.

To learn more about the Alerta family of products and how they work together, read our blog.

Key Features
Immediate notification of patient falls and wandering
'Plug and Play' System
Discreet and distinguished styling
Available in four colours
Choice of a variety of plugs to work with any nurse call system
Long lasting welded seals and strong wiring
Hygienic, antibacterial easy-clean material
Large size to avoid overstepping
Extra 6" lead for links with additional mats or call buzzers
Dimensions: 55 x 80cm
Identify Your Plug Type

Single Ring Plug

Double Ring Plug

White Plug Six Groove

Clear Plug Six Groove

Clear Plug Four Groove

See the Alertamat for Yourself

Wireless Care Alarm Kit with Chair Leaving Sensor Mat

Description
VAT Relief
Wireless Alarm Kit with Chair Sensor Mat
When caring for elderly or infirm individuals, there is a very real danger of falls when they get up from a chair. Falls can cause serious injuries, so it's vital that you can do everything in your power to reduce the risk of falls occurring.

This full Wireless Alarm Kit with Chair Sensor Mat includes a chair sensor mat, transmitter and pager (receiver). It's a chair leaving alarm ideal for monitoring an elderly patient prone to, or at risk of, leaving their seat. This helps you ensure that the risk of falls is as minimal as possible.

Easy to Set-Up
The wireless alarm kit is easy to set-up straight out of the box. Simply place the sensor mat on a chair that you wish to monitor, plug the cable from the mat into the transmitter box and turn the transmitter and pager on. You instantly have a chair monitor sensor mat with a wireless pager to alert you if a person gets up out of their seat.

Instant Alert
When the sensor mat is triggered, the transmitter sends a signal to the pager, which will instantly alert you. The pager can be set to utilise sound, light and vibration to ensure that you get the alert. This enables you to quickly rush to the aid of those who need it, reducing the risk of falls and helping you provide a more streamlined level of care.

Versatile Sensor Mat
The included chair sensor mat can be switched to alert when pressure is removed from the pad (when a person gets up out of their seat) or when pressure is applied to the pad (for instance if placed under a door mat, and this is walked on). This gives you an incredible level of versatility of use, helping you provide the best level of care possible. The chair sensor mat is suitable for most chairs.

Features of the Wireless Alarm Kit with Chair Sensor Mat
Easy connection of the sensor mat to the transmitter
Sends wireless alarm signal to receiver pager
Alarm options of sound, vibration and light
Specifications of the Wireless Care Alarm Kit with Chair Leaving Sensor Mat
The specifications of the Wireless Care Alarm Kit with Chair Leaving Sensor Mat are:

Transmitter power: 2 x AAA batteries (not included)
Pager power: rechargeable battery charged by charging dock (included)
Pager and transmitter dimensions:
Height: 9.5cm
Width: 6.2cm
Depth: 1.7cm
Chair sensor mat dimensions:
Length: 25cm
Width: 25cm
Maximum range: 30 metres
Safety Warning
Please note that if you have a pacemaker installed, this product may be unsuitable for your use. Please consult a medical professional before purchase for more information.

Floor Pressure Mat Wander Alarm With Pager and Transmitter

Description
Floor Pressure Mat with Pager and Transmitter
If you are a carer or in charge of keeping an eye on a loved one, it can be hard work. Some in particular are prone to wandering, leaving them at risk of injuries and falls if no one is aware they have moved. But you can't be everywhere at once and you can't always know when they have moved, especially considering how quiet they can be when they change position.

You need a way of being alerted if they were to move, whether that is getting up off their chair or passing through a room they should not.

With the Floor Pressure Mat With Pager and Transmitter, you can be. The mat should be concealed under a rug or carpet so it does not become a slip hazard, but then positioned in the designated area. This can be next to a bed, a chair or even by an exit they are likely to use. When the pressure is placed on the mat, the sensor will send an alarm to the pager to alert you to the person's movements.

What Is Included with My Purchase of the Floor Pressure Mat with Pager and Transmitter?
Your purchase will include the following:

1 x Floor pressure mat
1 x Transmitter
1 x Pager
How Does the Pressure Mat Work?
The Pressure Mat is quick and easy to install as it comes with everything you need: mat, transmitter and pager. The small transmitter is connected to the pad and when pressure is applied to the pad, the transmitter sounds the alarm on the pager. The sensors within the mat are two thin layers and when they connect, the alarm is triggered. The transmitter sends a wireless signal to the pager and has a range of 120 meters, which is long far enough to keep the mat under a doormat.

The pager can be connected to up to ten pressure mats if required. The alarm has to be reset after a use. Even if the person has continued moving and stepped off the mat, the alarm continues to sound, alerting you as the carer to the movement.

Where Can I Use This Alarm Mat?
The 120 meter range of this alarm mat means it can be used creatively under rugs or mats around the house. Provided you can stop it from becoming wet ? for instance if you have a porch covering ? it can even be used under a doormat.

Features of the Floor Pressure Mat
Transmitter has a range of 120 meters
Pager requires two AA batteries
Transmitter is powered by one PP3 9V battery
Dimensions of the mat: 75 x 45cm
How Do I Use the Mat?
The pressure pad should always be placed under something due to the slippery nature of the pad. For those who are already unstable on their feet, it is important to ensure the mat will not be a trip hazard if they are not used to stepping onto rugs et cetera. A motion sensor monitor can be used to detect movement as well, such as this PIR Transmitter and Alarm Pager Kit.

Please Note: The mat should not be folded as this will damage and crack the sensors.

Wireless Care Alarm Kit with Large Bed Leaving Sensor Mat

When caring for elderly or infirm individuals, there is a very real danger of falls when they get up from a bed. Falls can cause serious injuries, so it's vital that you can do everything in your power to reduce the risk of falls occurring.

This full Wireless Alarm Kit with Bed Sensor Mat includes a bed sensor mat, transmitter and pager (receiver). It's a bed leaving alarm ideal for monitoring an elderly patient prone to, or at risk of leaving their bed unattended. This helps you ensure that the risk of falls is as minimal as possible.

Easy to Set-Up
The wireless alarm kit is easy to set up straight out of the box. Simply place the sensor mat on a bed you wish to monitor, plug the cable from the mat into the transmitter box and turn the transmitter and pager on. You instantly have a bed monitor sensor mat with a wireless pager to alert you if a person gets up out of their bed.

Instant Alert
When the sensor mat is triggered, the transmitter sends a signal to the pager, which will instantly alert you. The pager can be set to utilise sound, light and vibration to ensure that you get the alert. This enables you to quickly rush to the aid of those who need it, reducing the risk of falls and helping you provide a more streamlined level of care.

Versatile Sensor Mat
The included bed sensor mat can be switched to alert when pressure is removed from the pad (when a person gets up out of their bed) or when pressure is applied to the pad (for instance if placed under a door mat, and this is walked on). This gives you an incredible level of versatility of use, helping you provide the best level of care possible. The bed sensor mat is suitable for most beds.

Specifications of the Wireless Care Alarm Kit with Large Bed Leaving Sensor Mat
The specifications of the Wireless Care Alarm Kit with Large Bed Leaving Sensor Mat are:

Transmitter power: 2 x AAA batteries (not included)
Pager power: rechargeable battery charged by charging dock (included)
Pager and transmitter dimensions:
Height: 9.5cm
Width: 6.2cm
Depth: 1.7cm
Bed sensor mat dimensions:
Length: 75cm
Width: 25cm
Max range: 30 metres
Care and Maintenance of the Large Bed Sensor Mat
Do not fold or bend the mat and store flat
Do not immerse the mat in any liquid/solution
Wipe clean only with a non-caustic sanitising solution
The mat should be cleaned before use and regularly during use
To minimise the risk of infection, single patient use is recommended
Safety Warning
Please note that if you have a pacemaker installed, this product may be unsuitable for your use. Please consult a medical professional before purchase for more information.

Alerta Bed Alertamat Pressure Alarm Mat (Replacement Mat Only)

Whether caring for someone at risk of falling out of bed, or a patient with dementia prone to wandering unattended, its crucial to have an alarm system that lets you give the appropriate care as soon as possible. The Alerta Bed Alertamat Pressure Alarm Mat is the perfect tool for this, as it is a reliable and cost effective way to be immediately notified if a patient is at risk of falling or if they attempt to leave their bed. This product contains only a replacement Alerta Bed Alertamat Pressure Alarm Mat, without the Alarm Monitor and cable needed to function properly.

Plug and Play
A durable and long lasting bed pressure mat, the Alertamat is designed with a simple 'plug and play' system, which allows the care giver quick and easy set up in any hospital or care home scenario. Featuring a choice of a variety of plugs to make it compatible with any nurse call system, the Alertamat Bed Pressure Alarm Mat will be up and running immediately, and operating with ease.

How Does the Alertamat Work?
The Alertamat Bed Pressure Alarm Mat features a pressure sensor to detect when a patient leaves their bed in order to proactively give the carer advanced warning of any fall or attempt to leave the bed. The moment the patient falls or leaves the bed, it will instantly activate the nurse call system, allowing the caregiver to quickly check the patient's safety in a prompt fashion.

Can I Place the Alertamat Under a Mattress?
While the Alertamat may work when placed underneath thinner foam mattresses, we would recommend placing it on top of the mattress, possibly beneath a fitted sheet. This will ensure the sensor triggers the alarm immediately, avoiding the delays or false alarms that can sometimes occur when it is placed beneath a mattress.

Versatile for Your Needs
The Alertamat Bed Pressure Alarm Mat features its own alarm monitor, so it can be used on its own as an effective fall prevention tool. Alternatively, this Bed Pressure Alarm Mat can be easily connected to any common nurse call system, allowing the carer to choose between localised alerts, or centralised alerts to the entire nursing staff, so prompt patient care is ensured. Once the patient is seen to and returns to bed, the alarm is automatically reset for further monitoring and care.

The Bed Alertamat can be powered with a mains plug, and also by battery, providing superior versatility over other pressure alarm mats.

Key Features
Contains ONLY a replacement Bed Alertamat without Alarm Monitor and cable
Immediate notification if patient falls or attempts to leave bed
'Plug and Play' System
High and low volume alert
Multiple choices of alarm tone
Adjust delay to reduce false alarms
Low battery alert
Alarm resets immediately when patient returns to bed
Hygienic, antibacterial easy-clean material
Mains or battery powered
Dimensions: 25 x 76cm
Included in Box
1 x Bed Alertamat Pressure Alarm Mat
See the Alertamat for Yourself

Wireless Door and Window Security Alarm with Radio Pager Kit

If your patient or loved one is prone to wandering around outside, this can lead to them getting into harm or even becoming lost for days on end. The Wireless Door and Window Security Alarm with Radio Pager Kit is a comprehensive kit that notifies you through the supplied pager when a door or window has been opened in your client's house. With a range of 100 metres, you can retain control of the situation from a distance, allowing you to care for other patients or go about daily activities with peace of mind.

Key Features and Benefits
Quick and easy to install on window or door
Comprises of a door/window transmitter with alarm pager
Alarm is transmitted to pager when the door opens
All required batteries are included
Supplied with a screw pack and Velcro dots for easy fixing
Ideal to detect wandering patients who are at risk of coming to harm
Door alarm is specifically designed for deaf people
Pagers alerts you via vibration and a tone alert for versatility
Battery typically lasts around six months
Transmission range is 100 metres
Applications for the Door and Window Security Alarm Kit
The Wireless Door and Window Security Alarm Kit is suitable for a wide range of applications. As the alarm can be attached with Velcro or screws (both of which are supplied) to the door frame, it is quick and easy to set up. Applications include the following:

Care home applications
Dementia wandering
Driveway security
Home security
Hostel monitoring
Patient movement monitoring
Security applications
Shed security
Shop doorway security
What's Included with My Purchase?
The following items are included with your purchase of the Wireless Door and Window Security Alarm:

1 x Door or window transmitter
1 x Alarm pager
1 x 9V battery
2 x AA batteries
1 x Screw pack and Velcro dots
High-Volume and Vibrating Alarm Pager
The Radio Pager features a built-in alarm that notifies you via sound alert and vibrating alert when the transmitter has been activated. This has three settings so you can be notified either via a high-volume tone, low-volume tone, or by vibration only. The pager will continue to alert you for up to two weeks until it is turned off and has a battery life of approximately 12 months (although this is dependent on the usage and batteries).

Housed in a robust and stylish case, the Alarm Pager is ideal for a carer to carry around throughout the day if your patient tends to wander and is at high risk of harming themselves or others. Up to eight pendants can be used with the alarm pager if multiple windows and doors must be checked; simply purchase more Door and Window Contact Sensors to personalise the system.

Security Alarm Transmitter
The transmitter of the Door and Window Security Alarm with Pager Kit is powered by an included (but unattached) nine volt battery. The device has a range of 100 metres and features a low-battery warning that is transmitted to the pager. The transmitter battery lasts up to 12 months depending on usage, and can even be placed in a power-saving mode that turns the LED light off for an additional six months of battery life.

Can I Use the Door and Window Contact Sensor with My Door?
The Door and Window Contact Sensor features a design that is suitable for most doorways, however for certain doors where there is little room around the frame, it may not be suitable. In these cases, we would recommend using a PIR Motion Detector Kit as an alternative from the same system.

Can I Add More Pagers or Transmitters?
Each Door and Window Alarm can be used with as many MPPL pagers as you like, as long as each pager has been paired with the device. Additional pagers are available separately.

If you want to use additional alarms with one MPPL Pager, you can use as many as eight different transmitters with a single MPPL Pager. Additional sensors are available separately.

Technical Specifications
Pager Dimensions (HxWxD): 80 x 60 x 12mm
Transmitter Dimensions (HxWxD): 137 x 38 x 22mm
Range: 100 metres
Weight: 120g

MPPL Pager for the Home Care Alarm System

The MPPL Pager for the Home Care Alarm System is used as an addition to a wide range of Medpage and EasyLink transmitters. You can add up to eight transmitters to one pager, enabling you to monitor up to eight patients or residents at any one time.

What's Included?
1 x MPPL Pager
Please note that, in order for this pager to work, a transmitter is required. It is compatible with all Medpage and EasyLink transmitters.

Who Can Use the MPPL Pager?
When used alongside a compatible transmitter, the MPPL Pager is ideal for many care situations, both at home and in professional care. If you monitor an individual who is prone to wandering, getting out of bed, or leaving a chair unassisted, then this pager can help to ensure that you can offer them the assistance they require when it is needed most.

How Does the Pager Work?
The MPPL Pager is connected to a transmitter (sold separately). When a sensor sends an alert to the transmitter, the transmitter then sends an alert to the page to inform you of the situation.

How Are Alerts Received?
The alerts are received through the pager with either an audible alarm or a vibration. The volume of the beeper alert can be adjusted as required, and the vibration mode is ideal for silent operation at night.

Will the MPPL Pager Work in My House?
For certain properties, such as older houses with thicker walls, you may find that the range of your MPPL device is reduced. To counter this, we recommend using the MPPL Pager Alarms Signal Repeater and Booster, which can be used to expand the operating range of your product.

Technical Specifications
Pager Dimensions (WxHxD): 6 x 9 x 3.5cm
Frequency of the pager: 433.92 MHz
Operating range: 100 metres
Volume: 70 - 85dB