Universal FluidProtect Surgical Anti Fog Face Mask Earloops - Pack of 300

Specification

 • Fluidprotect® procedure face masks are fluid resistant and offer protection where there is risk of fluid contamination from exposure to blood and/or bodily fluids.
• Face masks are regulated under the Medical Device Regulation (EU) 2017/745 and are recognised as being dual purpose: protecting both the healthcare provider and the patient.
• Complies with BS EN ISO 14683:2019 Type IIR standards. Fluidprotect® masks are splash resistant to 120mmHg (16kPa).
• BFE ≥98% 
• DP <60 Pa/cm2
• Microbial Cleanliness ≤30 cfu
• Made from light weight breathable materials with earloops to provide a secure fit.
• The fully enclosed nose band can be moulded to the wearer's face to give a secure and comfortable fit.
• The anti-fog strip reduces the instances of glasses or other eye protection fogging up.
• The ergonomic design keeps the mask away from the wearer's face to reduce liquid contamination from saliva contact.
• All Fluidprotect® face masks are Latex, Cadmium and Nickel free.
• Precautions: Face masks are not designed to provide respiratory protection. Please see Uniprotect Respirators.
• Store in a cool dry place out of direct sunlight.

Universal Uniprotect Air Surgical Face Mask Type II Earloops - Pack of 300

Specification

 Type II Face Mask

• Uniprotect standard procedure face masks offer basic protection for medical staff. They are suitable for general patient care and procedures with no risk of exposure to blood and/or bodily fluids.
• Face masks are regulated under the Medical Device Regulation (EU) 2017/745 and are recognised as being dual purpose: protecting both the healthcare provider and the patient.
• Made from light weight breathable materials with handy earloops to provide a secure fit.
• The fully enclosed nose band can be moulded to the wearer's face to give a secure and comfortable fit.The ergonomic design keeps the mask away from the wearer's face to reduce liquid contamination from saliva contact.
• Complies with BS EN ISO 14683:2019 Type II standards.
• BFE ≥98% 
• DP <40 Pa/cm2
• Microbial Cleanliness ≤30 cfu
• All Uniprotect face masks are Latex, Cadmium and Nickel free.
• Precautions: Face masks are not designed to provide respiratory protection. Please see Uniprotect Respirators.
• Store in a cool dry place out of direct sunlight.

Fluid Resistant

3 ply face masks with an integrated nose clip. High filtration efficacy acc. to EN 14683:2019, Type II R Fluid Resistant. These masks have different layer materials and thicknesses to correctly reach Type II R Mask (EN14683:2019) certification. 

• Outer layer: polypropylene non-woven fabric, water-repellent effect layer.
• Middle layer: High efficiency blown melt.
• Inner layer: polyester soft skin-friendly non-woven fabric

Please be aware, there are many other masks on online market places with zero certification as well as only having 95% high bacterial filtration efficiency (usually sold as dust masks). Most do not carry the IIR for fluid resistance/repellant 

Material

• Outer layer: PP Non-woven 
• Middle layer: Melt-blown 
• Inner layer: PP Non-woven 
• Earloop: Urethane Elastic Fiber length 18cm ± 1cm
• Nose clamp: Iron wire with plastic coasting 10.5cm ± 1cm

MELT BLOWN FABRIC TECHNOLOGY

Our masks feature a once-obscure material called melt-blown fabric. It's an extremely fine mesh of synthetic polymer fibres that forms the critical inner filtration layer of a mask, allowing the wearer to breathe while reducing the inflow of possible infectious particles. There are many non-certified medical masks on other marketplaces that do not have this - they are just three layers of non woven material. Demand for melt-blown fabric is very high.

Surgical Face Masks - Type IIR Certified x 50

Universal FluidProtect Surgical Face Mask & Visor Loops - Pack of 100

Specification

 • Fluidprotect® procedure face masks are fluid resistant and offer protection where there is risk of fluid contamination from exposure to blood and/or bodily fluids.
• Face masks are regulated under the Medical Devices Directives 93/42 EEC and are recognised as being dual purpose: protecting both the healthcare provider and the patient.
• Complies with BS EN ISO 14683:2019 Type IIR standards. Fluidprotect® masks are splash resistant to 120mmHg (16kPa).
• BFE ≥98% 
• DP <60 Pa/cm2
• Microbial Cleanliness ≤30 cfu
• Made from light weight breathable materials with earloops to provide a secure fit.
• The fully enclosed nose band can be moulded to the wearer's face to give a secure and comfortable fit.
• The anti-fog strip reduces the instances of glasses or other eye protection fogging up. Supplied with anti-fog visor attached.
• The ergonomic design keeps the mask away from the wearer's face to reduce liquid contamination from saliva contact.
• All Fluidprotect® face masks are Latex, Cadmium and Nickel free.
• Precautions: Face masks are not designed to provide respiratory protection. Please see Uniprotect Respirators.
• Store in a cool dry place out of direct sunlight.

Universal FluidProtect Surgical Face Mask & Visor Ties - Pack of 100

Specification

• Fluidprotect® surgical face masks are fluid resistant and offer protection where there is risk of fluid contamination from exposure to blood and/or bodily fluids.

• Face masks are regulated under the Medical Device Regulation (EU) 2017/745 and are recognised as being dual purpose: protecting both the healthcare provider and the patient.
• Complies with BS EN ISO 14683:2019 Type IIR standards. Fluidprotect® masks are splash resistant to 120mmHg (16kPa).
• BFE ≥98% 
• DP <60 Pa/cm2
• Microbial Cleanliness ≤30 cfu
• Made from light weight breathable materials with long ties to provide a secure fit.
• The fully enclosed nose band can be moulded to the wearer's face to give a secure and comfortable fit.
• The anti-fog strip reduces the instances of glasses or other eye protection fogging up. Supplied with anti-fog visor attached.
• The ergonomic design keeps the mask away from the wearer's face to reduce liquid contamination from saliva contact.
• All Fluidprotect® face masks are Latex, Cadmium and Nickel free.
• Precautions: Face masks are not designed to provide respiratory protection. Please see Uniprotect Respirators.
• Store in a cool dry place out of direct sunlight.

Universal FluidProtect Surgical Face Mask Anti-Fog Band - Pack of 300

Specification

 • Fluidprotect® surgical face masks are fluid resistant and offer protection where there is risk of fluid contamination from exposure to blood and/or bodily fluids. Face masks are regulated under the Medical Devices Directives 93/42 EEC and are recognised as being dual purpose: protecting both the healthcare provider and the patient.
• Complies with Medical Device Regulation (EU) 2017/745 Type IIR standards. Fluidprotect® masks are splash resistant to 120mmHg (16kPa).
• BFE ≥98% 
• DP <60 Pa/cm2
• Microbial Cleanliness ≤30 cfu
• Made from light weight breathable materials with long ties to provide a secure fit.
• The fully enclosed nose band can be moulded to the wearer's face to give a secure and comfortable fit.
• The anti-fog strip reduces the instances of glasses or other eye protection fogging up.
• The ergonomic design keeps the mask away from the wearer's face to reduce liquid contamination from saliva contact.
• All Fluidprotect® face masks are Latex, Cadmium and Nickel free.
• Precautions: Face masks are not designed to provide respiratory protection. Please see Uniprotect Respirators.
• Store in a cool dry place out of direct sunlight.

AntiFog Surgical Face Mask Type II - Pack of 40

 Type II Face Mask

• Uniprotect standard surgical face masks offer basic protection for medical staff. They are suitable for general patient care and procedures with no risk of exposure to blood and/or bodily fluids.
• Face masks are regulated under the Medical Device Regulation (EU) 2017/745 and are recognised as being dual purpose: protecting both the healthcare provider and the patient.
• Made from light weight breathable materials with long ties to provide a secure fit.
• The fully enclosed nose band can be moulded to the wearer's face to give a secure and comfortable fit. The ergonomic design keeps the mask away from the wearer's face to reduce liquid contamination from saliva contact.
• The anti-fog strip reduces the instances of glasses or other eye protection fogging up.
• Complies with BS EN ISO 14683:2019 Type II standards.
• BFE ≥98% 
• DP <40 Pa/cm2
• Microbial Cleanliness ≤30 cfu
• All Uniprotect face masks are Latex, Cadmium and Nickel free.
• Precautions: Face masks are not designed to provide respiratory protection. Please see Uniprotect Respirators.
• Store in a cool dry place out of direct sunlight.

Universal Uniprotect Silk Surgical Face Mask Type II Ties - Pack of 300

Specification

 Type II Face Mask

Uniprotect standard surgical face masks offer basic protection for medical staff. They are suitable for general patient care and procedures with no risk of exposure to blood and/or bodily fluids.
• Face masks are regulated under the Medical Device Regulation (EU) 2017/745 and are recognised as being dual purpose: protecting both the healthcare provider and the patient.
• Made from light weight breathable materials with long ties to provide a secure fit.
• The fully enclosed nose band can be moulded to the wearer's face to give a secure and comfortable fit. The ergonomic design keeps the mask away from the wearer's face to reduce liquid contamination from saliva contact.
• Complies with BS EN ISO 14683:2019 Type II standards.
• BFE ≥98% 
• DP <40 Pa/cm2
• Microbial Cleanliness ≤30 cfu
• All Uniprotect face masks are Latex, Cadmium and Nickel free.
• Precautions: Face masks are not designed to provide respiratory protection. Please see Uniprotect Respirators.
• Store in a cool dry place out of direct sunlight.

Universal Uniprotect FFP3 Valved Respirators - Pack of 240

Specification

 • UniProtect particulate respirators are recommended for use where protection of the respiratory system is essential. Respirators are intended to help reduce the wearer's exposure to potentially infectious airborne pathogens.
• Uniprotect respirators have a large breathing chamber to create a cooler air exchange and help hold the mask away from the face for comfort and ease of speech.
• Respirators have a natural anti-fog seal and soft inner facing layer for comfort. The valve helps to reduce the build up of heat which makes breathing easier especially when worn for longer periods of time or used in warm or humid environments.
• All respirators individually CE marked and BS EN 149:2001 compliant.
• Latex, Cadmium and Nickel free.
• Fit: Elasticated headbands.
• Colour: White with Blue Band.
• When using a respirator, the blue nose band side MUST be worn facing outward and on the top in order to provide the best possible fit.
• Store in a cool dry place out of direct sunlight.

Universal UniProtect FFP2 Respirators - Pack of 240

Specification

 • UniProtect particulate respirators are recommended for use where protection of the respiratory system is essential. Respirators are intended to help reduce the wearer's exposure to potentially infectious airborne pathogens.
• Uniprotect respirators have a large breathing chamber to create a cooler air exchange and help hold the mask away from the face for comfort and ease of speech.
• Respirators have a natural anti-fog seal and soft inner facing layer for comfort.
• All respirators individually CE marked and BS EN 149:2001 compliant.
• Latex, Cadmium and Nickel free.
• Fit: Elasticated headbands.
• Colour: White.
• When using a respirator, the white nose band side MUST be worn facing outward and on the top in order to provide the best possible fit.
• Store in a cool dry place out of direct sunlight.

Washable Face Mask Coverings - Pack of 200

Non-medical face coverings help you to meet government regulations, and do your part to ensure essential medical PPE is reserved for healthcare professionals

• • Double layer fabric face covering, suitable for general, social and workplace use
  • Fabric binding allows the product to be washed (wash before first use) and reused again, simply wash at 60C. Designed to be worn over ears to keep in place and fit close to the face
  • 2 layers of cotton fabric, with extra inner loop 
  • Please note that this is not medical PPE and makes no assurances that it can prevent transmission or infection of disease and viruses
  • Remove and do not use if you are suffering breathing difficulties
  • Available in Black, Dark Grey, Navy, Red, Royal Blue and White colours
  • One Size fits all

Portwest Direct Vent Goggles

Certified to EN166 3B and EN166 1B. Anti-scratch and anti-fog coating. Direct ventilation reduces misting and heat build up and restricts the influx of liquids and dust. Front adjustable headband. Protects against hazards in industry, schools, universities and DIY etc.

3M N95 MASK

N95 (FFP2-KN95) Protective Disposable Breathing Respirator Face Mask Pack of 5

• • Particle filtering face mask
  • Conforms to FFP2
  • Complies with European Standard for Particle Filtering
  • Comfortable to wear
  • Durable and withstands extended use
  • Pack of 5

  
  

  Due to the hygienic and infection control properties of this product it is non returnable

10 Fluid-resistant (Type IIR) surgical masks (FRSM) Protective Disposable 3 Ply Medical EN14683 Certified

10 Fluid-resistant (Type IIR) surgical face masks (FRSM) Protective Disposable 3 Ply EN149

• Pack of 10
• Top quality medical grade masks
• Fluid Resistant Type iiR surgical masks FRSM
• Certified to standard EN14683
• Filtration efficiency >98%
• 3 Ply with non-woven fabric and a high efficiency blown melt middle layer 

Protective
Disposable
Fluid/splash resistant
Quantity Discounts Available

UK Government 

25 Fluid-resistant (Type IIR) surgical face masks (FRSM) Protective Disposable Medical 3 Ply EN14683 Certified

• 25 Fluid-resistant (Type IIR) surgical masks (FRSM) Protective Disposable 3 Ply EN14683
  

  • Pack of 25
  • Factory sealed
  • Top quality medical grade masks
  • Fluid Resistant Type iiR surgical masks FRSM
  • Certified to standard EN14683
  • Filtration efficiency >98%
  • 3 Ply with non-woven fabric and a high efficiency blown melt middle layer 

  Protective
  Disposable
  Fluid/splash resistant
  Quantity Discounts Available
  
  UK Government 
  

  Guidance

  COVID-19 personal protective equipment (PPE) Updated 24 April 2020

  "10.2 Fluid resistant surgical masks
  Fluid-resistant (Type IIR) surgical masks (FRSM) provide barrier protection against respiratory droplets reaching the mucosa
  of the mouth and nose.
  FRSMs should be well fitted and subject to the same level of care in use as respirators (section 10.1). FRSMs are for single use or single session use (section 6) and then must be discarded. The FRSM should be discarded and
  replaced and NOT be subject to continued use in any of the circumstances outlined for respirators (section 10.1).

  The protective effect of masks against severe acute respiratory syndrome (SARS) and other respiratory viral infections has been well established. There is no evidence that respirators add value over FRSMs for droplet protection when both are used with recommended wider PPE measures in clinical care, except in the context ofAGPs.

  Surgical masks should:

  cover both nose and mouth
  not be allowed to dangle around the neck after or between each use
  not be touched once put on
  be changed when they become moist or damaged
  be worn once and then discarded – hand hygiene must be performed after disposal"
  
  

  Due to the hygienic and infection control properties of this product it is non returnable

  
  

Comfortable Reusable Washable Polyurethane/Sponge Type Face Mask Covering UK

• Black Face Mask Covering IN STOCK
  

  • Comfortable
  • Reusable
  • Washable
  • Polyurethane/Sponge Type

  
  
  Black Face Mask
  

  • Comfortable
  • Reusable
  • Washable
  • Polyurethane/Sponge Type

  
  

Surgical Face Masks - Type IIR Certified x 50

ProSolve FFP2 5 Ply Respirator Face Mask

Description

These are suitable for a wide range of applications, they are light-weight and fit snug against the face.
Conforms to EN149:2001+A1:2009 FFP2 and are CE Marked in accordance with the requirements of the PPE Directive 2016/425

JSPAGE130-201-100 Filterspec Pro Black FMP3 Valv

Description

FilterSpec Pro Black with FMP3 Valve Filter.
Effortlessly combines eye and respiratory protection.
FMP3 filtration offers 99% efficiency with APF of 20xWEL for fine dusts, fibres, fumes, and mists.
Mask is designed with a polystyrene exhalation valve cage with a latex rubber exhalation valve.
The mask element is for single use only. Includes black holder, 3 filters and goggle.

With health and safety becoming more of a day to day priority in the workplace you may be looking for a range of PPE (personal protective equipment) accessories that is suitable for both you and your employees for everyday use. With PPE designed for a wide range of sectors and a vast range of products available it may be difficult to know where to go to find the product suitable for your business or activity. With a wide range of PPE accessories suitable for a wide range of business sectors, JSP have the answer.

JSPASG134-125-800 Filterspec Black FMP3 Valve Filter

Description

The unique FilterSpec Pro effortlessly combines both eye and respiratory protection. The one-piece lens offers optimal coverage and has anti-mist and anti-scratch coating as standard. FMP2 & FMP3 filtration giving 94% efficiency.

FilterSpec out exceeds EN1827 for breathing resistance by more than half and performs over 3% above the standard for filtration efficiency. Includes holder, three filters and spectacles.

Frame: black.
Lens type: smoke.

3M9915 Nuisance Level Acid Gas Respirators (BOX-20)

Description

Lightweight, collapsible, comfortable and hygienic respiratory masks offer wearers protection against dusts and mists. They also provide additional relief from low levels (below WEL) of acid gases such as sulphur dioxide and hydrogen fluoride. The convex shape, twin strap design, foam nose seal and aluminium nose clips ensure a good face seal over a range of face sizes.

PulsarFoldable FFP2 Respirator Mask Pack 2

Description

This high performance FFP2 PSP mask is a foldable face-piece respirator has been design for a comfortable secure fit and provided FFP2 protection in a variety of environments.

Features and Benefits
• Easy to fit lightweight mask is made from polypropylene with soft inner layer for improved comfort over long periods of time
• Latex-free head straps designed to equal pressure distribution on the face and neck
• Contour fit pre-shaped nose bridge for secure fit and comfortable wear
• Meets european standards 2016/425 EN149:2001+A1:2009 FFP2 NR and provides protection against low-to-average toxicity, liquid and solid areosols
• Foldable and easy to store

Typical Applications
• Protection against low to average toxicity, solid and liquid aerosols
• Industrial
• Factories
• Schools
• Retail
• Offices
• Healthcare
• EN149:2001+A1:2009 FFP2 NR

Notes
• Intended for single use respiratory protection
• One size
• 25 per pack in a polybag
• Mask: Polypropylene
• Head Strap: latex-free elastic
• Nose Bridge: aluminium

JSPASG134-121-100 Filterspec Black FMP3 Valve Filter

Description

FilterSpec Black with FMP3 Valve Filter - Clear Lens.
Effortlessly combines eye and respiratory protection. FMP3 filtration offers 94% efficiency.
FMP3 masks have an assigned protection factor (APF) of 20x workplace exposure limit (WEL) for fine dusts, fibres, fumes, and mists.
Mask is designed with a polystyrene exhalation valve cage with a latex rubber exhalation valve.
The mask element is for single use only. Includes a black or white holder, 3 filters and spectacle.

With health and safety becoming more of a day to day priority in the workplace you may be looking for a range of PPE (personal protective equipment) accessories that is suitable for both you and your employees for everyday use. With PPE designed for a wide range of sectors and a vast range of products available it may be difficult to know where to go to find the product suitable for your business or activity. With a wide range of PPE accessories suitable for a wide range of business sectors, JSP have the answer.

3M9926 Nuisance Level Acid Gas Respirator (PK-10)

Description

Lightweight, effective, comfortable and hygienic respiratory protection against dusts and mists. It also provides additional relief from low levels of organic vapours or acid gases such as sulphur dioxide and hydrogen fluoride. The convex shape, twin strap design, foam nose seal and aluminium nose clip ensures a good face seal over a range of face sizes.

Protection Level: Nominal Protection Factor 12xNPF and Assigned Protection Factor 10xAPF.

Nuisance Odour Respirators (Pack of 10)

Nuisance Odour Respirators (Pack of 10)

Provides relief from nuisance levels of organic vapours and respiratory protection against fine dusts. Offers relief from the irritation of low levels (below WEL) of specific gases and vapours, often present alongside particulate hazards. Activated carbon layer provides relief from low levels of specific gases and vapours. Durable collapse resistant inner shell. 3M™ Cool Flow™ valve reduces heat build-up to offer comfortable protection, particularly in hot and humid conditions. Good fit provided by convex shape, nose clip and twin strap.

Moldex2555 FFP3 NR D Dust Mask With Ventex Valve (PK-20)

Respirators for protection against toxic dusts, mists and fumes based on water and oil. This general purpose mask is suited to most industrial applications.

Features and Benefits
• DuraMesh® for optimum shape retention and durability
• ActivForm® seal automatically adjusts to different face shapes
• Ventex®-valve reduces moisture and heat
• Adjustable strap for comfort and nose clip

Typical Applications
• General industry

3M9922 Organic Vapour Respirator - Valved (PK-10)

Description

Suitable for use in non-surgical environments, public transport, schools, universities, supermarkets and public areas. Protects against respiratory bacteria and wet particles. Manufactured from non-woven hypoallergenic sterilised fabric. BFE 95 melt blown filter aids good permeability. Adjustable nose clip allows the mask to fit perfectly across the face. Non allergenic ear loops for long term wearer comfort. Filtration efficiency >90%, operating conditions -20to + 40deg C, relative humidity <85%. One size fits all, box of 50.

Portwest FFP3 Valved Face Mask for Virus Protection P301 (Pack of 10)

• FFP3 face mask that can protect against viruses, bacteria and spores
• Designed to be easy to use, tight fitting and long-lasting
• Pack of 10 means that you can replace your face mask quickly
• Also suitable for dust, chemical, mist, smoke and aerosol protection

Medline Ultra Virus Protection Face Mask with Eye Shield (Pack of 25)

Medline Ultra Virus Protection Face Mask with Eye Shield (Pack of 25)

Designed for protection against viruses for the mouth and eyes, the Medline Ultra Virus Protection Face Mask with Eye Shield can be used in medical procedures to reduce the risk of infection. Featuring a fluid-resistant design and integrated eye shield, the Medline Virus Protection Mask offers great protection against bacteria and micro-organisms.

What's Included?

• 25 x Individual Face Masks

Who Can Use the Medline Virus Protection Face Mask with Eye Shield?

Designed to be both comfortable and effective, the Medline Masks are great for a number of different scenarios, including:

• Use in hospitals for procedures
• Use in other medical facilities (such as GP offices)
• General protection against the spread of viruses

Please note that these masks are NOT surgical masks and cannot be used for surgical procedures.

Fluid Resistant Design

The Medline Ultra Face Mask is not only designed to protect against airborne particles, it also includes fluid-resistance. This has been tested to EN Standard 14683, giving you peace of mind that the masks will protect you when needed.

Integrated Eye Shield Included

While many people are aware of the danger of germs entering the mouth or nose, fewer people are aware that viruses can also spread through contact with the eyes. Each of these masks includes a glare-resistant eye shield that increases protection when compared to a traditional face mask.

How Comfortable is the Medline IIR Face Mask?

While each mask has a bacterial filtration rate of 99.4%, the materials used ensure that the masks allow for easy and comfortable breathing. The masks include ear loops to allow for comfortable and secure wear over a longer period of time.

What is the Medline Ultra Virus Face Mask Made From?

• Interior: Thermal-bonded polypropylene
• Exterior: Spunbound polypropylene

Technical Specifications

• Bacterial Filtration Efficiency: 99.4%
• Differential Pressure: 36.92 (Pa/cm²)
• Splash Resistance (kPa): 21kPa
• Splash Resistance (mmHg): 160mmHg
• EN 14683 Type: IIR

What is EN 14683?

EN 14683 is the European standard that governs medical face masks – there are three levels of efficacy tested:

• Type I (the least effective)
• Type II
• Type IIR (the most effective)

These masks meet Type IIR, meaning that they are classified as some of the most effective for bacterial filtration and splash protection available.

Disposable Face Mask Pack of 50

Delta Plus Type 2 Medical Disposable Face Mask (Pack of 50)

The Delta Plus Type 2 Medical Disposable Face Mask (Pack of 50) is a certified face mask designed to reduce the risk of the spread of bacteria and infections. It meets the standard EN 14683 Type II, meaning that it can prevent bacteria from reaching the mouth and nose, while three layers and elastic ear loops provide a more secure and reliable use.

What's Included?

• 50 x Disposable Face Masks

Who Can Use the Type 2 Disposable Face Mask?

The non-woven polypropylene Delta Plus Type 2 Face Mask is designed to reduce the risk of the spread of germs, viruses, and bacteria, making the Class 1 medical face mask ideal for individuals who frequently come into contact with individuals requiring treatment or examination. As it helps to prevent you from touching your face and mouth, it is also suitable for wearing out in public, in shops, at work, and on public transport.

How Often Do I Need to Change the Mask?

The comfortable and disposable nature of the product means that you can wear it all day long. It should be replaced every few hours or sooner if you feel the need.

Certification of the Delta Plus Type 2 Face Mask

The Delta Plus Type 2 Disposable Face Mask is fully certified to EN 14683 'Medical face masks - Requirements and test methods', offering a Bacterial Filtration Efficiency rating of ≥98 %. This means that you can use it in medical procedures that have a risk of fluid splash.

How Do I Fit the Delta Plus Face Mask?

The Delta Plus Disposable Mask is designed to be incredibly easy to fit. The mask features two elastic loops that hook around the ears, therefore keeping it in place and preventing movement. There is also an adjustable nose clip to provide further reassurance that the mask will remain in place.

Safety Goggles EN 166 B 3 & 4

Essential to ensuring your dental business is legally compliant, these Safety Goggles are an essential part of PPE. Providing a barrier between your eyes and everything from dust through to liquid splashes, they are manufactured from a transparent polycarbonate with indirect ventilation to prevent misting during use. The wide peripheral design provides exceptional vision with a durability that stands up to repeated use. Legally compliant, they are effective against most liquid splashes along with large dust particles and can be adjusted for comfort using the elasticated rear strap. These safety goggles also offer protection from medium energy impact from particles moving up to 120 m/second.

• Durable polycarbonate construction
• 360-degree transparent design allows for exceptional vision
• Suitable for protection against liquids and dust
• Indirect ventilation to prevent misting
• Compliant with EN166 3.4.9.B and EN 166 1.B
• Can be adjusted for exceptional comfort.
• Pack size: 1
• Dimensions- 190 x 80 x 76mm

FFP3 Valved Respirator - Box of 5

PPE Pack - Gloves/Masks/Hand Gel/Wipes

FFP3 Face Masks x 20 (Medical PPE Certified)

FFP2 Respirator - Medical PPE Certified x20 (EU Manufactured)

FFP2 Respirator Face Masks x 50 - Medical PPE Certified

Fluid Resistant Surgical Face Masks - Type IIR Certified x 50

Pack of 25 Protex S1 Respiratory Masks

FFP2 Respirator - Medical Use Certified x20 (EU Manufactured)