Toilet Seats

Arthro Tall-ette Raised Toilet Seat

Description

Arthro Tall-ette Raised Toilet Seat
The Arthro Tall-ette Raised Toilet Seat has been designed to accommodate the requirement for sitting with either leg extended. It features a cut-out section on either the left or right side as required, and affixes to the toilet to add height and increased practicality.

Indications of the Raised Toilet Seat
Due to the cut-out nature of the toilet seat, it is ideal for anybody with either temporary or ongoing injuries or conditions that require the leg to remain extended while seated. If mobility is reduced due to a condition affecting the ability of the knee to bend, then this toilet seat can provide convenient positioning.

The toilet seat can also support users whose leg may currently be immobile or broken, or with sprained muscles and therefore painful to bend. This makes it an ideal choice for such medical environments as therapy clinics and rehabilitation centres, where patients may be suffering from reduced mobility and complications resulting in the inability to properly bend the either leg.

Design Benefits
In addition to the convenience of the cut-out side, the raised toilet seat also adds a height of 140mm. This means that it enhances the ease of lowering to and rising from the toilet seat, which will be paramount for users with reduced mobility or limb pain.

The seat affixes with a Slip-in Lok-in-el bracket, securing it into place for safety. It can also be easily wiped down in between use, and cleaned thoroughly for hygiene maintenance. This is especially important both when considering personal hygiene in the home and the hygiene and safety of patients when in a medical environment.

Technical Specifications
Seat height: 140mm (5.5)
Seat weight: 1.6kg
Maximum user weight: 165kg (25.75 stone)

Ashby Raised Toilet Seat 4inch/10cm Standard

The Ashby Raised Toilet Seat 4 inch (10cm) Standard offers a simple way of minimising excessive bending and the danger of over-balancing for those with limited mobility.

This raised toilet seat can be fitted securely to any toilet in seconds as the brackets are easily adjusted by hand.

The top of the seat is shaped to distribute the user weight over a greater area. The contoured shape has the effect of holding the occupant in position. A wide frontal area allows easy access for personal cleaning.

Features of the Ashby Raised Toilet Seat 4inch/10cm Standard
Deep splash guard for maximum hygiene
Light, robust plastic, resistant to stains and odour
Dip at front facilitates personal cleaning
Incorporates lid strong to sit on
Tough hinge is easy to keep open and clean
Additional Information:
The Ashby Raised Toilet Seat is available in three different heights (5cm, 10cm and 15cm). In addition, a deluxe model is available and identical to the raised toilet seat. This elegant ergonomic design offers the extra feature of a lid to sit on when dressing in the bathroom.

Please click on the downloadable pdf file on your right for more information: /user/Ashby-Raised-Toilet-Seat-10cm.pdf (no lid)

Technical Specifications of the Ashby Raised Toilet Seat 4inch/10cm Standard
Length: 375mm
Width: 390mm
Height: 100mm
Max user weight: 190kg
Returns Policy
Please note, Ovilcare is dedicated to maintaining the highest levels of hygiene for all of its products and for this reason the Ashby Raised Toilet Seat is non-refundable and non-returnable on grounds of hygiene.

Ashby Raised Toilet Seat 6inch/15cm Standard

The Ashby Raised Toilet Seat 6 inch (15cm) Standard offers a simple way of minimising excessive bending and the danger of over-balancing for those with limited mobility.

This raised toilet seat can be fitted securely to any toilet in seconds as the brackets are easily adjusted by hand.

The top of the seat is shaped to distribute the user weight over a greater area. The contoured shape has the effect of holding the occupant in position. A wide frontal area allows easy access for personal cleaning.

Features of the Ashby Raised Toilet Seat 6inch/15cm Standard
Deep splash guard for maximum hygiene
Light, robust plastic, resistant to stains and odour
Dip at front facilitates personal cleaning
Incorporates lid strong to sit on
Tough hinge is easy to keep open and clean
Additional Information:
The Ashby Raised Toilet Seat is available in three different heights (5cm, 10cm and 15cm). In addition, a deluxe model is available and identical to the raised toilet seat. This elegant ergonomic design offers the extra feature of a lid to sit on when dressing in the bathroom.

Please click on the downloadable pdf file on your right for more information: Ashby Raised Toilet Seat 15cm (no lid)

Technical Specifications of the Ashby Raised Toilet Seat 6inch/15cm Standard
Length: 375mm
Width: 390mm
Height: 150mm
Max user weight: 190kg
Returns Policy
Please note, Health and Care is dedicated to maintaining the highest levels of hygiene for all of its products and for this reason the Ashby Raised Toilet Seat is non-refundable and non-returnable on grounds of hygiene.

Bariatric Toilet Seat

Description

Bariatric Toilet Seat
The Bariatric Toilet Seat has been designed to provide optimal seating for anybody requiring a larger seating area for using the loo. It combines comfort with an ergonomic design, and can be fitted onto most toilet frames.

Indications of the Bariatric Toilet Seat
The Bariatric Toilet Seat has been specially designed to cater to the requirements of anybody requiring a larger seating area. It is suitable for use at home where the current toilet seat does not meet these requirements.

The toilet seat is also ideal for installing in the bathrooms of clinics and medical centres. As patients may have a wide range of requirements, this toilet seat will help to accommodate some of these by offering a wider surface area, and in turn helping to reduce stress that can occur when the special requirements of patients are not met.

Design Benefits
The toilet seat features an ergonomic design that will fit in with any decor, either in a private bathroom or public toilet. It fits securely to most toilet frames, making sure that it can be utilised by as many users as necessary.

Technical Information
Seat size (W x D): 482 x 482mm (19 x 19 inches)
Aperture size (W x D): 258 x 290mm (11.5 x 10 inches)
Seat weight: 3.5kg
Maximum user weight: 381kg (16 stone)

Cefndy Super Bariatric Raised Toilet Seat

Living with limited mobility can make even the simplest of every day tasks into a challenge, one that is all the greater when it comes to more intimate tasks such as toileting. The Cefndy range of products have been designed to offer high levels of performance where it matters, allowing users to go about their daily lives with dignity and comfort. The Super Bariatric Raised Toilet Seat's height is fully adjustable making this stackable aid an excellent option for both at-home and care home applications.

Features of the Raised Toilet Seat
Seat can be easily clipped on or clipped off
Choose from free standing or floor-fixing models
Fully height adjustable
Stackable
Specifications of the Super Bariatric Raised Toilet Seat

Between Arms 800mm
Aperture (Width x Depth) 250 x 270mm
Seat Height 450 - 600mm
Seat Width 780mm
Seat Depth 460mm
Seat to Top of Arm 170mm
Seat to Top of Back 375mm
Footprint (Width x Depth) 900 x 600mm
Max User Weight 318kg /50st
Delivery
Please allow 5 - 10 working days for delivery.
The Cefndy Range

Offering high quality health care products since 1976, Cefdny offers a wide range of product options. The Raised Toilet Seat is also available in Mediatric and Bariatric models.

Comfyfoam Raised Toilet Seat

Description

Comfyfoam Raised Toilet Seat
The Comfyfoam Raised Toilet Seat is designed to add both height and comfort to an existing toilet bowl. It is easy to affix for simple yet effective use, and is made from a soft foam for added comfort.

Indications of the Toilet Seat
Due to its ease of attachment and comfortable design, the raised toilet seat is ideal for anybody looking to improve the comfort of their existing toilet. This could be due to existing conditions or ailments where sitting for any length of time can be uncomfortable and even painful, or it could be simply to provide a little more comfort in the bathroom.

The extra height of 110mm also means that the toilet seat will be easier to lower onto and rise from, as the body does not need to move as close to the ground. For anybody with reduced mobility or discomfort when bent too low, this toilet seat will be ideal.

Easy to Affix
Not only does the toilet seat combine added height and soft comfort, but it is also easy to fit. It does not require any screw fixings, and simply pushes to fit securely over most standard toilet bowls.

This means that it can be attached to the toilet in no time, ensuring that comfort can be enjoyed when it is needed most.

Optional Lid
The Comfyfoam Raised Toilet Seat is available to purchase with or without a lid. While the addition of a lid can conceal odours and help with the aesthetic of the homely bathroom, a lid-free seat may be preferred by anybody who would struggle to lift the lid in time.

The desired option can be selected from the drop-down menu at the top of the page.

Technical Specifications
Weight without lid: 1.9kg
Weight with lid: 2.2kg
Maximum user weight: 185kg (29 stone)
Overall dimensions (H x W x L): 110 x 380 x 410mm (4.5 x 15 x 16 inches)

Dania Toilet Seat With Cover

Description

Features and Benefits
The Dania range of toilet seats from Pressalit have been designed for long term use whether in the home, hospitals or other public buildings. Adjustable buffers can be rotated to fit the curves of different toilets bowls giving further stability. This durability is combined with a carefully shaped seat in order to give maximum comfort. Made from Duraplast - a strong scratch resistant material. Stainless steel hinges, polypropylene buffers. All fixings supplied.

Dimensions
Aperture: W218 X D288mm (8 1/2 x 11 1/4). Width of seat: 360mm (14). Front to Back of Seat: 420mm (16 1/2).

Weight Limit
250kg (39st)

Dania Toilet Seat With Cover - 100mm (4) With Cover

Description

Features and Benefits
The Dania range of toilet seats from Pressalit have been designed for long term use whether in the home, hospitals or other public buildings. Adjustable buffers can be rotated to fit the curves of different toilets bowls giving further stability. This durability is combined with a carefully shaped seat in order to give maximum comfort. Made from Duraplast - a strong scratch resistant material. Stainless steel hinges, polypropylene buffers. All fixings supplied.

Dimensions
Aperture: W218 X D288mm (8 1/2 x 11 1/4). Width of seat: 360mm (14). Front to Back of Seat: 420mm (16 1/2).

Weight Limit
150kg (23st)

Dania Toilet Seat With Cover - 50mm (2) With Cover

Description

Features and Benefits
The Dania range of toilet seats from Pressalit have been designed for long term use whether in the home, hospitals or other public buildings. Adjustable buffers can be rotated to fit the curves of different toilets bowls giving further stability. This durability is combined with a carefully shaped seat in order to give maximum comfort. Made from Duraplast - a strong scratch resistant material. Stainless steel hinges, polypropylene buffers. All fixings supplied.

Dimensions
Aperture: W218 X D288mm (8 1/2 x 11 1/4). Width of seat: 360mm (14). Front to Back of Seat: 420mm (16 1/2).

Weight Limit
150kg (23st)

Drive Medical - Raised Toilet Seat TSE 150

Description

 
Drive Medical - Raised Toilet Seat TSE 150
The Raised Toilet Seat TSE 150 attaches to the former seat, allowing for a non-skid, anti-slip and wiggle-proof seating. Also its vinyl-coated armrests provide added comfort and safety.

The TSE 150 is engineered to provide maximum hygiene. It is built with smooth surfaces and comes with two recesses.

Lastly, the TSE 150 will be shipped out in high-quality packaging and will come with plastic gloves for a hygienic assembly.

Technical Specifications
Width: 56cm (22)
Depth: 49cm (19)
Height: 14cm (5.5)
Weight: 5.7kg (13lb)
Capacity: 150kg (24lb)

Etac Cloo Toilet Seat Raiser Adjustable angle and height;

Description

Etac Cloo Toilet Seat Raiser
The Etac Cloo Toilet Seat Raiser is a height adjustable toilet seat raiser which combines flexibility and simplicity. The Etac Cloo Toilet Seat Raiser can be adjusted in three different heights. It can also be set with a slight forward tilt if reduced mobility in hip and knee joints restrict the ability to sit down and stand up.

The Etac Cloo Toilet Seat Raiser is available with or without arm supports. The arm supports are foldable but can be fixed in a folded down position if required. The arm supports are also detachable. The Etac Cloo Toilet Seat Raiser can be used with only one arm support if space around the toilet is limited.

Features of the Etac Cloo Toilet Seat Raiser
Easy height adjustment - To change the height, the spacers are easily assembled or disassembled without the use of any tools
Anterior - Can be set with a slight forward tilt if reduced mobility in hip and knee joints restrict the ability to sit down and stand up
Removable seat unit - Has smooth surfaces and can be easily removed without the use of tools. Easier for cleaning
Dimensions of the Etac Cloo Toilet Seat Raiser
Seat width - 40cm (15.75in)
Arm support from top of seat - 21cm (8.25in)
Total width without arm supports - 40cm (15.5in)
Total width inc arm supports - 60cm (23.5in)
Width between arm supports - 49cm (19.25in)
Weight with arms - 4.8kg (10.58lbs)
Weight without arms - 3.3kg (7.28lbs)
Max user weight - 150kg (330lbs)
Materials of the Etac Cloo Toilet Seat Raiser
Seat - Polypropylene
Attachment - Aluminium
Heightening spacers - Polyamide

Harvest 100mm Raised Toilet Seat

Description

Harvest 100mm Raised Toilet Seat
For those with limited levels of mobility, the use of a raised toilet seat may be necessary to facilitate the toileting process. The Harvest 100mm Raised Toilet Seat is designed to assist those with limited mobility, reducing the risk of injury and making entry and exit from the seat as easy and safe as possible.

Safe and Secure
This seat makes the toileting process as safe as possible by reducing the amount of bending the user needs to do to enter the seat. This reduced bending results in a lessening of the risk of over-balancing, preventing potential falls and injury. To ensure a secure fit to the toilet pan, the seat has easy-fit brackets with rubber over-moulding, meaning that it will be a perfect fit every time.

Excellent Hygiene
Toilet seats must be manufactured to be as hygienic as possible, and so this seat has been designed with a variety of easy-clean features. The one piece moulding of the seat makes for ease of cleaning, with no sharp ridges to catch debris. Anti-bacterial protection is built in to the seat, making it safe for use in both home and medical environments.

Key Features
Assists those with limited mobility
Makes toileting as simple and safe as possible
Reduces the need for bending by the patient
Lessens the risk of over-balancing
Features easy-fit brackets with rubber moulding
Provides a secure fit onto almost all toilet pans
One piece moulding for ease of cleaning
Built-in anti-bacterial protection
Dimensions: 375 x 390 x 100mm

Herdegen Non-Slip Toilet Seat Raiser Clipper 5

Description

Herdegen Non-Slip Toilet Seat Raiser Clipper 5
The Herdegen Non-Slip Toilet Seat Raiser Clipper 5 is a handy toilet seat raiser with clippers for a strong and secure fix. The Herdegen Non-Slip Toilet Seat Raiser Clipper 5 has removable armrests to facilitate lateral transfer.

The Herdegen Non-Slip Toilet Seat Raiser Clipper 5 increases the height of the toilet seat by 11 cm/4.3.

Uses of The Herdegen Non-Slip Toilet Seat Raiser Clipper 5
Increase your existing toilet seat height.
Gain balance support when sitting down/standing up from the toilet.
Increase seated comfort whilst on the toilet.
Prevent risk of falls by ensuring a safe movement.
Allow easier seated transfers by removing the armrests during the transfer.
Features of The Herdegen Non-Slip Toilet Seat Raiser Clipper 5
The toilet seat raiser with armrests and lid is placed on a standard toilet in order to raiser the height of the sear surface.
Considerably easier for disabled or elderly people with reduced mobility to get on and off the toilet.
Armrests can be removed by a push button to facilitate lateral transfers. This provides space for transfer from a wheelchair to the toilet.
The armrests can be re-attached after transfer to provide stability support whilst the user is on the toilet
Maximum user weight: 110 kg/242.5 lbs.
Most falls amongst elderly tend to happen in the bathroom. A toilet seat raiser with armrests help to provide additional balance support and may help prevent the risk of falls.
Made from injected plastic, making the Clipper 5 a rustproof toilet seat raiser with lid which is easy to clean.
How to clean The Herdegen Non-Slip Toilet Seat Raiser Clipper 5
The non-slip toilet seat raiser has to be cleaned regularly with a mild cleaning agent and a soft cloth. It may be washed with soap and water or disinfected with non-chlorinated products.

Specification
Height: 11 cm/4.3.
Total Width: 66 cm/25.9.
Total Depth: 42 cm/16.5.
Inside Dimensions: 25 cm x 21 cm/9.8 x 8.2.
Weight: 3.1 kg/6.8 lbs.
Material: Injected plastic seat.
Maximum User Weight: 110 kg/242.5 lbs.

Herdegen Non-Slip Toilet Seat Raiser Clipper 7

Description

Herdegen Non-Slip Toilet Seat Raiser Clipper 7
The Herdegen Non-Slip Toilet Seat Raiser Clipper 7 is a sturdy and secure toilet seat raiser. The Herdegen Non-Slip Toilet Seat Raiser Clipper 7 has legs, armrests and a lid for users with severely reduced mobility and stability.

The Herdegen Non-Slip Toilet Seat Raiser Clipper 7 is suitable for users with a maximum weight of 150 kg/330 lbs.

Uses of The Herdegen Non-Slip Toilet Seat Raiser Clipper 7
Increase the height of your existing toilet seat.
Improve your stability when sitting down and standing up from the toilet.
Increase your comfort whilst sitting on the toilet.
Ensure safety and prevent risk of falls.
Features of The Herdegen Non-Slip Toilet Seat Raiser Clipper 7
Placed on a standard toilet in order to raise the height of the seat surface.
Easier for disabled or elderly people with reduced mobility to get on and off the toilet.
Height adjusted by a push button to suit the individual user needs. The height adjustable function facilitates easier access whilst providing each individual user with a comfortable and safe seat.
This toilet seat raiser with legs can offer a sturdy and secure support with its steel frame and aluminium legs.
Maximum user weight limit of 150 kg/330 lbs.
Especially suitable for heavier users or for those who require additional balance support when sitting down or standing up.
Useful for people with hip replacements or for people with difficulty bending at the waist.
Most falls amongst elderly tend to happen in the bathroom, by using a sturdy and secure toilet seat raiser with legs, you can help prevent the risk of falls.
Made from injected plastic, making the Slipper 7 rustproof and easy to clean.
How to clean the The Herdegen Non-Slip Toilet Seat Raiser Clipper 7
The non-slip toilet seat raiser has to be cleaned regularly with a mild cleaning agent and a soft cloth. It may be washed with soap and water or disinfected with non-chlorinated products.

Specifications
Adjustable height: 52-65 cm/20-25.
Total width: 60 cm/23.
Total Depth: 42 cm/16.5.
Inside dimension: 25 cm x 21 cm/9.8 x 8.2.
Weight: 5.9 kg/13 lbs.
Material: Steel frame, aluminium legs, injected plastic seat.
Maximum user weight: 150 kg/330 lbs.

Homecraft Padded Raised Toilet Seat

Description

Homecraft Padded Raised Toilet Seat
The Homecraft Padded Raised Toilet Seat affixes to an existing toilet seat to offer improved comfort and increased height. It includes a vinyl covering over the soft padding that is easily wiped down, helping to ensure hygiene is not compromised for comfort.

Indications of the Toilet Seat
Anybody looking to improve the comfort of their existing toilet seat will benefit from this Homecraft toilet seat. Whether this is to ease the discomfort caused by sitting in one position for any length of time, or for reducing pain in injured or hurt limbs, the cushioning padding is ideal for improving the overall toileting experience.

The seat is also available with a height of either 50mm (2) or 100mm (4). This makes it the perfect option for anybody who finds the height of their current toilet to be too low, and will also be ideal for anybody who struggles to lower to or rise from the toilet at present, with the added height making accessing the loo much easier.

Design Benefits
Aside from the enhanced comfort this toilet seat provides, it also offers quality hygiene maintenance with its vinyl covering. This makes it easy to wipe down in between use, and allows for more thorough cleaning to reduce the spread of germs and bacteria.

The cushion easily attaches with four hook-and-loop straps, which will hold it securely in place. This means that the improved comfort can be enjoyed time and time again with the simple yet effective design of the Homecraft Padded Raised Toilet Seat.

Technical Information

Homecraft Sussex Toilet Frame

Description

Homecraft Sussex Toilet Frame
The Homecraft Sussex Toilet Frame provides a convenient and reliable support for users looking for assistance when using the toilet. It combines a steel frame and black hinged toilet seat with a sub-seat and skirt for optimal benefit.

Indications of the Sussex Toilet Frame
The Sussex Toilet Frame is ideal for anybody looking for support with lowering to and rising from the toilet. The handles at either side of the frame can be used to apply pressure or grip onto to assist with movement.

As the frame can be adjusted in height, with a range of 470mm to 640mm (18.5 to 25.25), it is ideal for a wide range of user needs. Whether looking for added support due to reduced mobility or ongoing struggles, or as an aid to maintaining independence following injury, the Sussex Toilet Frame can offer this assistance.

Easy Cleaning
Not only is this toilet frame both practical and beneficial, but it is also easy to clean. It is important that such products as toilet aids are kept clean, and that good levels of hygiene is maintained, whether used in the home or in a public bathroom. The sub-seat and skirt can be removed for thorough cleaning, and the unit can be wiped down in between use for ongoing cleaning.

Technical Specifications
Seat height: 470 to 640mm (18.5 to 25.25)
Width: 550mm (21.5)
Maximum depth: 680mm (26.75)
Aperture (LxW): 280 x 230mm (11 x 9)
Weight: 5.3kg
Maximum user weight: 125kg (19.5 stone)

Homecraft Uni-Frame Toilet Frame

Description

Homecraft Uni-Frame Toilet Frame
The Homecraft Uni-Frame Toilet Frame combines a folding frame with a one-piece plastic seat for providing optimal support during toileting. The height of the frame can be adjusted to ensure it can be positioned as suitably as possible.

Indications of the Uni-Frame Toilet Frame
The Uni-Frame Toilet Frame is ideal for anybody looking for support with lowering to and rising from the toilet. The handles at either side of the frame can be used to apply pressure or grip onto to assist with movement.

As the frame can be adjusted in height, it is ideal for a wide range of user needs. Whether looking for added support due to reduced mobility or ongoing struggles, or as an aid to maintaining independence following injury, the Uni-Frame Toilet Frame can offer this assistance.

Folding Frame
The Uni-Frame Toilet Frame is ideal for individual use in a home. However, it is also a convenient solution to providing practical support for patients in such environments as clinics and care homes, where patients and residents may require assistance.

The folding frame can be easily transported between bathrooms, providing users with the support they need without compromising their independence.

Technical Specifications
Seat height: 435 - 560mm (17 - 22)
Rail height: 620 - 745mm (24.5 - 29.25)
Dimensions (WxD): 500 x 420mm (19.5 x 16.5)
Weight: 5.1kg
Maximum user weight: 127kg (20 stone)

Invacare Aquatec 90000 Toilet Seat Raiser

Perfect for people with limited mobility, the Aquatec 90000 Toilet Seat Raiser comes with the option of three different seat heights, making it convenient for the individual user's needs. If you have trouble rising from or lowering to a standard toilet seat, the Aquatec 90000 allows an easier way to use the bathroom.

Features of the Aquatec 90000 Toilet Seat Raiser
The Aquatec 90000 enables the user to pick the right seat height to suit their needs. It is available in either a two, four or six inch seat height.

The toilet seat raiser has armrests to provide additional support for the user. This is specifically useful for transitioning between standing and sitting, there to provide a steadying aid for those who need it. The armrests are smooth and easy to grip and also have the ability to swing away, meaning they can be positioned in the best place to suit the user.

The toilet seat and lid for the Aquatec 900000 can be unclipped from the base. The seat can be detached, making it ideal for travel or moving – no tools are required to detach the seat from the base.

How Do I Use the Invacare 90000 Toilet Seat Raiser?
Full user instructions can be found in the PDF link below:

Click Here for User Instructions
Click above for user instructions
Technical Details
The Aquatec 90000 consists of the following measurements (full dimensions are below):

Seat Width: 365mm
Seat Length: 390mm
Weight: ranges from 4.4kg - 3.6kg depending on the seat depth
Available Seat Depths: 2cm, 6cm and 10cm (
The Aquatec 90000 has a load capacity of 150kg (23 stone).

Melton Sloped Raised Toilet Seats - Right Slope

Description

Features and Benefits
Specifically designed for users who cannot or who are required not to flex their hips due to surgery, injury or severe arthritis. Lower limb amputees also find the sloped seats more secure and comfortable. The cutaway can also help prevent internal rotation. Fitted to the toilet with plastic brackets, which have wing nut adjustment underneath the seat. May be autoclaved on cleaning cycles up to 80°. Available in right or left slopes.

Dimensions
Aperture size: 230 x 220mm (9 x 8 1/2). Height 100mm (4).

Weight Limit
190kg (30st)

Moen Locking Elevated Toilet Seat with Support Handles

Description

Moen Locking Elevated Toilet Seat with Support Handles
The Moen Locking Elevated Toilet Seat with Support Handles provides existing toilet bowls with an enhanced seat comfort and height. It features integrated handles for added stability, with a spacious seat design for improved comfort.

Indications of the Elevated Toilet Seat
Going to the loo is a daily occurrence for all, but for some people it can be a challenging routine where additional support may be beneficial. This toilet seat can offer this support as it combines a raised height with stable handles for maximum benefit.

For anybody struggling to lower to and rise from a traditional seat, the raised height of an additional 127mm provided by this seat can reduce this difficulty. The support handles are ideal for anybody who may feel a little unstable when seated without having anything to hold onto.

Design Benefits
In addition to providing both stability and height, the toilet seat also features a more spacious seat surface. This means that there will be no more balancing precariously on smaller standard toilet seats, as the seat accommodates a more relaxed positioning with combined space and support.

The seat attaches securely to most round and elongated toilet bowls to ensure that it can be utilised in as many situations as possible.

Technical Information
Maximum user weight: 136kg (21.5 stone)
Seat weight: 3.5kg
Aperture size (L x W): 270 x 220mm (10.5 x 8.5 inches)
Overall dimensions (H x W x D): 127 x 610 x 410mm (5 x 24 x 16 inches)

Padded Toilet Seat 4in

Padded foam toilet seat with washable vinyl white cover, secures with hook and loop straps on underside, provides an ergonomic way of adding comfort to commode and toilet seats. Can be cleaned easily with soapy water or disinfectant.

Padded Toilet Seat Reducer

Description

Padded Toilet Seat Reducer
The Padded Toilet Seat Reducer is designed to be placed on toilet seats to reduce the risk of sliding. It can be easily cleaned for hygiene control, and is suitable for most standard and elongated seats.

Indications of the Toilet Seat Reducer
The Padded Toilet Seat Reducer is ideal for anybody looking for a little extra support when using the loo. The contoured seat has a lifted back to prevent the risk of the user sliding around.

The splash guard will also benefit individuals looking for improved control with urination, as it deflects it into the toilet bowl.

Improved Hygiene
Using the Toilet Seat Reducer can improve hygiene both for the toilet seat and the surrounding area. The use of the splash guard will deter any unwanted splashes, and the Seat Reducer itself can be wiped down when not in use. The vinyl-covered Reducer is easy to clean to ensure that optimal levels of cleanliness can be maintained at all times.

Toilet Seat Compatibility
To ensure that as many people as possible can benefit from the benefits of the Padded Toilet Seat Reducer, it has been designed to be suitable for use with most standard and elongated toilet seats. Whether required as extra support or as an approach to improving stability during toileting, it is an ideal solution that is compatible with most toilets.

Technical Information
Inner bowl diameter: 170 x 190mm (6.5 x 7.5)
Overall diameter: 370 x 390mm (14.5 x 15.5)