Bbraun Intrapur Lipid Filter >100ml/Minute Box of 50
OVBN4099702
Regular price
£328.68
/
Bbraun Intrapur Lipid Filter >100ml/Minute Box of 50
Description:
24 Hour Use.
Bbraun Intrapur Plus Filter >30ml/Minute Box of 50
OVBN4099800
Regular price
£436.97
/
Bbraun Intrapur Plus Filter >30ml/Minute Box of 50
Description:
96 Hour Use.
Intrapur Neonate Lipid 1.2m Box of 50
OVBN4099460
Regular price
£328.68
/
Intrapur Neonate Lipid 1.2m Box of 50
Inline IV filter for connection to an IV set for
retention of particles and fungi
elimination of air
Advantages
By using B. Braun IV filters the overall complication rate could be reduced by 10%. Using IV filters also makes sense financially: the length of ICU stay can be decreased by almost one day / patient which represents a 23% drop – a substantial economic advantage because additional patients a year can be admitted. In a study, this led in turn to an increase in revenue because no patients had to be turned away due to lack of capacity.
helps to prevent particulate contamination by retaining particles > 1.2 µm
reduces microbiological contamination by retaining fungi
reduces the risk of medication error. Solid particles > 1.2 µm occurring from incompatibility reactions are retained by the IV filter membrane
Blockage of filter membrane can be an alarming signal for an incompatibility reaction which could have severe clinical consequences for the patient when being infused.
low protein binding
allows passage of lipids
Technical data
Connections at both sides of the filter with luer lock fittings
Tubing diameter: 2.0 x 4.1 mm (PVC, DHP-free)
Total set length: 31 cm
Priming volume filter housing: 2.4 ml
Filling volume (incl. tubing): 3.46 ml
Flow rate (aqua dist.): 100 ml/min
Pressure resistant up to 2 bar (Burst pressure filter housing 3.1 bar)
DEHP-free
Use of filter for up to 24h
The device can be used for all patients for which infusion therapy is prescribed. No gender or age related limitations. Intrapur® Lipid can be used for adults, pediatric and neonates.
Intrapur Neonat Infusion Filter 0.2m Box of 50
OVBN4099451
Regular price
£425.40
/
Intrapur Neonat Infusion Filter 0.2m Box of 50
Intrapur Neonat - an infusion filter that can be used for up to 96 hours without losing the quality of the therapy
0.2 μm filter with a positively charged membrane
stops: bacteria, endotoxins, particles
can be used for up to 96 hours without losing the quality of therapy
Reliable venting regardless of the position thanks to the automatic air vent
fast filling with automatic venting
Luer Lock closure
DEHP and latex free
Braun Sterifix 0.2m filter Infusion Box of 50
OVBN4099354
Regular price
£997.00
/
Braun Sterifix 0.2m filter Infusion Box of 50
"0.2 µm infusion filter with unloaded membrane
- Particulate- and bacteria retention - Service life of the filter up to 24 hours - Positionally independent air separation - High flow rate - 0.2 µm Supor® membrane: - Filter area 10 cm² - Filling volume (enclosure) 2.4 ml - Flow rate (Aqua dist.) > 30 ml/min - Pressure-resistant up to 3.1 bar - Luer-Lock connectors - The Sterifix membrane is ""low protein binding""
Vacutainer Safety-Lok Blood Collection Set - Pack of 50
OVVS367282
Regular price
£56.02
/
Vacutainer Safety-Lok Blood Collection Set - Pack of 50
Vacutainer blood collection set with single-handed safety activation and irreversible locking mechanism, confirmed with an audible click. With Luer Adapter.
BD Connectaª Plus Stopcock - Pack of 100
OV949
Regular price
£75.22
/
BD Connectaª Plus Stopcock - Pack of 100
BD Connecta Plus Stopcock for pressure monitoring. 3-way with rotating luer lock with colour coding pegs. Single use, sterile.
BD Connecta Plus Stopcock for pressure monitoring. 3-way with rotating luer lock with colour coding pegs and a 10cm extension line. Single use, sterile.
BD Venflon Pro Safety 20g x 32mm, Pink - Box of 50
OV947
Regular price
£87.97
/
BD Venflon Pro Safety 20g x 32mm, Pink - Box of 50
BD Venflonª Pro Safety
Developed to help minimise the risk of unanticipated blood splash and needlestick injuries
Robust needle tip protection Ð fully encapsulates needle tip
Ease of penetration (small or fragile veins)
Reliable insertion characteristics
BD Vialonª Ð Proven easy insertion and longer in dwell times
An award winning design for clinical best practice
Ergonomically designed to allow for a variety of user techniques and to aid insertion
BD Venflon Peripheral IV Catheter Ported 14g, 45mm - Winged x 50
OV952
Regular price
£83.78
/
BD Venflon Peripheral IV Catheter Ported 14g, 45mm - Winged x 50
Box of 50 14G x 45 mm BD Venflonª Peripheral IV Catheter with Injection port. Sterile, single use. Orange
BD Venflonª intravenous catheter with integrated injection port and valve for peripheral catheterisation.
Permits needle-free administration of bolus medications during infusion.
Back-cut needle bevel and tapered end of the PTFE catheter allows easier insertion and minimises the risk of vein damage.
Wing position reduces the risk of bacterial contamination by preventing any direct contact between the rear of the catheter hub and the skin. Utilising the wings, immobility of the catheter can be further insured by the application of the BD Veca-Cª and BD Veca-Fixª IV dressing.
BD Push Button Blood Set 25g x 0.75 Per 50 With Luer Adaptor 7 Tubing
OV966
Regular price
£113.02
/
BD Push Button Blood Set 25g x 0.75 Per 50 With Luer Adaptor 7 Tubing
The BD Vacutainer¨ Push Button Collection Set is the only blood collection system with push-button technology.
The BD Vacutainer¨ Push Button Collection Set offers split-second protection for that single moment which could potentially change your life.
The push-button safety mechanism instantly helps protect you against needlestick injury. Its in-vein activation reduces risk of healthcare worker exposure to a contaminated needle, provides easy activation without patient discomfort, and is ideal for use in high-risk environments.
The one-handed safety activation of the push button allows for activation of the safety mechanism while still attending to the patient/venipuncture site, and provides easier, safer blood collection for the healthcare worker, with no compromise to patient care.
Hook: n. 4 Hook material: stainless steel Stand material: stainless steel AISI 304
Adjustable height: 160-220 cm Base material: stainless steel
Infusion Stand With 2 Hooks - Aluminium I.V.Stand on 5 Wheels Trolley - 2 Hooks
OV24808
Regular price
£185.76
/
Infusion Stand With 2 Hooks - Aluminium I.V.Stand on 5 Wheels Trolley - 2 Hooks
Infusion Stand With 2 Hooks For Code 27805
I.V. Stand with 5 wheels trolleyÊ Hook: n. 2 Hook material: plastic Stand material: aluminium Adjustable height: 158-248 cm
Base material: plastic Weight: 2.9 kg
Bristol Maid Drip Stand
OV2443808
Regular price
£187.06
/
Bristol Maid Drip Stand
Bristol Maid Drip StandÊ
FEATURES
Legs and upright 304 grade stainless steel tube
Plastic or aluminium centre boss
50mm castors, 1 x anti-static, 1 x braking
Height adjustment from 1270 to 2000mm
2kg recommended maximum load per hook
Maximum load for any DPKS IV stand is 2kg (the attachment of an infusion pump is not recommended)
9kg plastic coated weighted base available on DPKS/2 for additional stability
Supplied boxed for self assembly
STANDARDS
CE marked
DIMENSIONS (w x d x h)
Packed size - 1230 x 290 x 100mm
Assembled size - 650 x 650 x 1270/2000mm
STANDARD COLOURS
Stand - Stainless Steel
Weighted Base - Grey
Mobile Infusion Stand - Stainless Steel - 2 Hook
OV641
Regular price
£369.38
/
Mobile Infusion Stand - Stainless Steel - 2 Hook
Mobile Infusion Stand - Stainless Steel - 2 Hook
Features
304 grade stainless steel legs & upright with a plastic centre boss
Unique design allows for simple assembly using an allen key to locate & hold the legs & upright in position
Supplied boxed for self assembly
Height adjustable upright using a handwheel (1270 - 2000mm)
Available with two or four pigtail hooks
Maximum recommended load 4kg on hooks (attachment of blood warmers/pumps & syringe drivers is not recommended)
50mm polypropylene twin wheel castors (1 x anti-static)
Technical Data
Meets appendix A (Stability Requirements) of BS 3619:1976ÊMobileÊInfusionÊStands
CE Marked
650 x 650 x 1270 - 2000mm
StandÊ- Stainless Steel
Bristol Maid Two Hook Easy Clean IV Stand with Green Base and Handle
OV2482
Regular price
£506.72
/
Bristol Maid Two Hook Easy Clean IV Stand with Green Base and Handle
Bristol Maid Two Hook Easy Clean IV Stand with Green Base and Handle
When using an IV drip in a professional medical scenario, ensuring your infusion stand is reliable and sturdy is crucial to providing quality patient care. The Bristol Maid Two Hook Easy Clean IV Stand with Green Base and Handle is specifically designed to handle infusion pumps or syringe drivers, and is stable enough to be depended on through a number of medical scenarios.
Stable and Sturdy
This infusion stand meets appendix A (Stability Requirements) of BS 3619:1976 Mobile Infusion Stands, so medical professionals can be sure that it will work right when it's needed most. With a five leg design, and a low centre of gravity to assist stability, it has been specially designed for unrivalled sturdiness. The heavy duty steel base with seamless polyurethane over-moulding provides a flexible finish that is both and tear and water resistant.
The steel base also provides impact protection to the fabric of the building, ensuring it doesn't cause unnecessary damage to its surroundings. Additionally, the fully welded construction features a 25mm diameter scratch resistant stainless steel upright for extra durability.
Intuitive Usability
This Bristol Maid IV Stand is made to be as easy to use as possible, featuring a handle to assist with manoeuvrability. This range of stands is also available in a range of colours, which can be used to guide department identification. This colour coded system reduces the risk of cross contamination, boosting the safety of the stand and increasing the quality of patient care.
Safe and Hygienic
Defined edges and contours make sure that all key surfaces are accessible, allowing for easy and effective cleaning, including steam cleaning. Five polymer 50mm twin wheel castors are shielded from fluid, making this stand fully mobile. Finally, the pole is height adjustable using a heavy duty hand wheel, so it will always be where you need it, when you need it.
Key Features
Sturdy and reliable infusion stand
Meets Appendix A of BS 3619:1976
Designed to hold infusion pumps and syringe drivers
Five leg design with low centre of gravity ensures stability
Heavy duty steel base with polyurethane over-moulding
Flexible tear and water resistant finish
Provides impact protection to the fabric of the building
Edges and contours ensure all key surfaces are accessible
Easy to clean for superior hygiene
Colour coded to assist department identification
Fully welded construction with 25mm diameter stainless steel upright
Polymer heavy duty 50mm twin wheel castors
Vertical clamping area: 936mm
One antistatic castor
Compatible with steam cleaning
Two pigtail hooks
Optional cylinder clamp available
Height adjustable using handwheel (1300 - 2100mm)
Base: Green
Maximum recommended load:
4kg on hooks plus 4kg on upright (per stand)
Bristol Maid Two Hook Easy Clean IV Stand with Green Base
OV2481
Regular price
£476.92
/
Bristol Maid Two Hook Easy Clean IV Stand with Green Base
Bristol Maid Two Hook Easy Clean IV Stand with Green Base
When using an IV drip in a professional medical scenario, ensuring your infusion stand is reliable and sturdy is crucial to providing quality patient care. The Bristol Maid Two Hook Easy Clean IV Stand with Green Base is specifically designed to handle infusion pumps or syringe drivers, and is stable enough to be depended on through a number of medical scenarios.
Stable and Sturdy
This infusion stand meets appendix A (Stability Requirements) of BS 3619:1976 Mobile Infusion Stands, so medical professionals can be sure that it will work right when it's needed most. With a five leg design, and a low centre of gravity to assist stability, it has been specially designed for unrivalled sturdiness. The heavy duty steel base with seamless polyurethane over-moulding provides a flexible finish that is both and tear and water resistant.
The steel base also provides impact protection to the fabric of the building, ensuring it doesn't cause unnecessary damage to its surroundings. Additionally, the fully welded construction features a 25mm diameter scratch resistant stainless steel upright for extra durability.
Intuitive Usability
This range of stands is available in a range of colours, which can be used to guide department identification. This colour coded system reduces the risk of cross contamination, boosting the safety of the stand and increasing the quality of patient care. An optional cylinder clamp is also available to increase the versatility of your stand.
Safe and Hygienic
Defined edges and contours make sure that all key surfaces are accessible, allowing for easy and effective cleaning, including steam cleaning. Five polymer 50mm twin wheel castors are shielded from fluid, making this stand fully mobile. Finally, the pole is height adjustable using a heavy duty hand wheel, so it will always be where you need it, when you need it.
Please note: This stand will be supplied with a green base and only two hooks.
Key Features
Sturdy and reliable infusion stand
Meets Appendix A of BS 3619:1976
Designed to hold infusion pumps and syringe drivers
Five leg design with low centre of gravity ensures stability
Heavy duty steel base with polyurethane over-moulding
Flexible tear and water resistant finish
Provides impact protection to the fabric of the building
Edges and contours ensure all key surfaces are accessible
Easy to clean for superior hygiene
Colour coded to assist department identification
Fully welded construction with 25mm diameter stainless steel upright
Polymer heavy duty 50mm twin wheel castors
Vertical clamping area: 936mm
One antistatic castor
Compatible with steam cleaning
Two pigtail hooks
Optional cylinder clamp available
Height adjustable using handwheel (1300 - 2100mm)
Base: Green
Maximum recommended load:
4kg on hooks plus 4kg on upright (per stand)
Bristol Maid Two Hook Easy Clean IV Stand with Grey Base
OV2480
Regular price
£476.92
/
Bristol Maid Two Hook Easy Clean IV Stand with Grey Base
Bristol Maid Two Hook Easy Clean IV Stand with Grey Base
When using an IV drip in a professional medical scenario, ensuring your infusion stand is reliable and sturdy is crucial to providing quality patient care. The Bristol Maid Two Hook Easy Clean IV Stand with Grey Base is specifically designed to handle infusion pumps or syringe drivers, and is stable enough to be depended on through a number of medical scenarios.
Stable and Sturdy This infusion stand meets appendix A (Stability Requirements) of BS 3619:1976 Mobile Infusion Stands, so medical professionals can be sure that it will work right when it's needed most. With a five leg design, and a low centre of gravity to assist stability, it has been specially designed for unrivalled sturdiness. The heavy duty steel base with seamless polyurethane over-moulding provides a flexible finish that is both and tear and water resistant.
The steel base also provides impact protection to the fabric of the building, ensuring it doesn't cause unnecessary damage to its surroundings. Additionally, the fully welded construction features a 25mm diameter scratch resistant stainless steel upright for extra durability.
Intuitive Usability This range of stands is available in a range of colours, which can be used to guide department identification. This colour coded system reduces the risk of cross contamination, boosting the safety of the stand and increasing the quality of patient care. An optional cylinder clamp is also available to increase the versatility of your stand.
Safe and Hygienic Defined edges and contours make sure that all key surfaces are accessible, allowing for easy and effective cleaning, including steam cleaning. Five polymer 50mm twin wheel castors are shielded from fluid, making this stand fully mobile. Finally, the pole is height adjustable using a heavy duty hand wheel, so it will always be where you need it, when you need it.
Key Features Sturdy and reliable infusion stand Meets Appendix A of BS 3619:1976 Designed to hold infusion pumps and syringe drivers Five leg design with low centre of gravity ensures stability Heavy duty steel base with polyurethane over-moulding Flexible tear and water resistant finish Provides impact protection to the fabric of the building Edges and contours ensure all key surfaces are accessible Easy to clean for superior hygiene Colour coded to assist department identification Fully welded construction with 25mm diameter stainless steel upright Polymer heavy duty 50mm twin wheel castors Vertical clamping area: 936mm One antistatic castor Compatible with steam cleaning Two pigtail hooks Optional cylinder clamp available Height adjustable using handwheel (1300 - 2100mm) Base: Grey Maximum recommended load: 4kg on hooks plus 4kg on upright (per stand) Please note: This stand will be supplied with a grey base and only two hooks.
Bristol Maid Heavy Duty Pump Stand
OV2478
Regular price
£1,142.63
/
Bristol Maid Heavy Duty Pump Stand
The Bristol Maid Heavy Duty Pump Stand is specifically designed to hold blood warmers/pumps and syringe drivers.
The Bristol Maid Heavy Duty Pump Stand has a heavy duty steel base with seamless polyurethane over moulding providing a flexible tear and water resistant finish, along with impact protection to the patient & fabric of the building.
Features of the Bristol Maid Heavy Duty Pump Stand
Five leg design with low centre of gravity to assist stability
Heavy duty steel base with seamless polyurethane over moulding
Defined edges & contours ensure that all key surfaces are accessible, allowing for easy & effective cleaning
Fully welded construction with 50mm diameter scratch resistant stainless steel upright & 25mm diameter pump support bows
Polymer heavy duty 75mm twin wheel castors shielded from fluid
Height adjustable stainless steel pole using a heavy duty handwheel (1300 to 2000mm)
Four or six seamlessly welded U shaped hooks
Maximum load on hooks 12kg (per stand)
Vertical clamping area
Choice of colours available
Specifications of the Bristol Maid Heavy Duty Pump Stand
620 x 620 x 1300/2000mm
Standards
Meets appendix A (Stability Requirements) of BS 3619:1976 Mobile Infusion Stands
Bristol Maid Standard Capacity Four Hook Infusion Pump Stand
OV2477
Regular price
£1,018.43
/
Bristol Maid Standard Capacity Four Hook Infusion Pump Stand
When using an IV drip in a professional medical scenario, ensuring your infusion stand is reliable and sturdy is crucial to providing quality patient care. The Bristol Maid Standard Capacity Four Hook Infusion Pump Stand is specifically designed to hold blood warmers or syringe drivers and is stable enough to be depended on through a number of medical scenarios.
Stable and Sturdy
This infusion stand meets appendix A (Stability Requirements) of BS 3619:1976 Mobile Infusion Stands, so medical professionals can be sure that it will work right when it's needed most. With a five leg design, and a low centre of gravity to assist stability, it has been specially designed for unrivalled sturdiness. The heavy duty steel base with seamless polyurethane over-moulding provides a flexible finish that is both wear and tear, and water resistant.
The steel base also provides impact protection to the fabric of the building, ensuring it doesn't cause unnecessary damage to its surroundings. Additionally, the fully welded construction features a 50mm diameter scratch resistant stainless steel upright, and 25mm diameter pump support bows.
Safe and Hygienic
Defined edges and contours make sure that all key surfaces are accessible, allowing for easy and effective cleaning, including steam cleaning. Five heavy duty 75mm twin wheel castors are shielded from fluid, making this stand fully mobile. Finally, the pole is height adjustable using a heavy duty hand wheel, so it will always be where you need it, when you need it.
Please note: Pumps not included.
Key Features
Sturdy and reliable infusion stand
Meets Appendix A of BS 3619:1976
Designed to hold blood warmers and syringe drivers
Five leg design with low centre of gravity ensures stability
Heavy duty steel base with polyurethane over-moulding
Flexible wear and tear, and water resistant finish
Provides impact protection to the fabric of the building
Edges and contours ensure all key surfaces are accessible
Easy to clean for superior hygiene
Fully welded construction with 50mm diameter stainless steel upright
25mm diameter pump supports bows
Polymer heavy duty 75mm twin wheel castors
One antistatic castor
Compatible with steam cleaning
Four U shaped hooks
Height adjustable using handwheel (1300 - 2000mm)
Suitable for use with four syringes
Maximum recommended load:
12kg on hooks plus 12kg on upright
Bristol Maid High Capacity Four Hook Infusion Pump Stand
OV2476
Regular price
£1,076.39
/
Bristol Maid High Capacity Four Hook Infusion Pump Stand
When using an IV drip in a professional medical scenario, ensuring your infusion stand is reliable and sturdy is crucial to providing quality patient care. The Bristol Maid High Capacity Four Hook Infusion Pump Stand is specifically designed to hold blood warmers or pumps and is stable enough to be depended on through a number of medical scenarios.
Stable and Sturdy
This infusion stand meets appendix A (Stability Requirements) of BS 3619:1976 Mobile Infusion Stands, so medical professionals can be sure that it will work right when it's needed most. With a five leg design, and a low centre of gravity to assist stability, it has been specially designed for unrivalled sturdiness. The heavy duty steel base with seamless polyurethane over-moulding provides a flexible finish that is both wear and tear, and water resistant.
The steel base also provides impact protection to the fabric of the building, ensuring it doesn't cause unnecessary damage to its surroundings. Additionally, the fully welded construction features a 50mm diameter scratch resistant stainless steel upright, and 25mm diameter pump support bows.
Safe and Hygienic
Defined edges and contours make sure that all key surfaces are accessible, allowing for easy and effective cleaning, including steam cleaning. Five heavy duty 75mm twin wheel castors are shielded from fluid, making this stand fully mobile. Finally, the pole is height adjustable using a heavy duty hand wheel, so it will always be where you need it, when you need it.
Please note: Pumps are not included
Key Features
Sturdy and reliable infusion stand
Meets Appendix A of BS 3619:1976
Designed to hold blood warmers and pumps
Five leg design with low centre of gravity ensures stability
Heavy duty steel base with polyurethane over-moulding
Flexible wear and tear, and water resistant finish
Provides impact protection to the fabric of the building
Edges and contours ensure all key surfaces are accessible
Easy to clean for superior hygiene
Fully welded construction with 50mm diameter stainless steel upright
25mm diameter pump supports bows
Polymer heavy duty 75mm twin wheel castors
One antistatic castor
Compatible with steam cleaning
Four U shaped hooks
Height adjustable using handwheel (1300 - 2000mm)
Suitable for use with four infusion pumps
Maximum recommended load:
12kg on hooks plus 12kg on upright
Bristol Maid Two-Hook Knockdown Infusion Stand
OVDPKS/1
Regular price
£183.80
/
Bristol Maid Two-Hook Knockdown Infusion Stand
Providing durability and convenience, the Bristol Maid Two-Hook Knockdown Infusion Stand is supplied for simple self assembly. Fitted with castors and offering an adjustable height, the Knockdown Infusion Stand is a practical option for holding and transporting infusion bags.
Assembling the Knockdown Infusion Stand
Offering a unique design, the Knockdown Infusion Stand enables simple self assembly. The kit is provided ready for self assembly, and is easily built with the use of an allen key, which is used to secure the legs and upright stand into position.
Packed for self assembly also means that the Infusion Stand can be erected when it is required, and will be easier to store until it is ready to be assembled.
Adjustability and Versatility
Offering an adjustable pole, the height of the Knockdown Infusion Stand can be altered from between 1270 - 2000mm. This is adjusted through the convenient use of a handwheel, enabling a more suitable height depending on the requirements of both the patients and the infusion bags.
The Knockdown Infusion Stand comes with two pigtail-style hooks, onto which infusion bags can be securely attached. The maximum load is 4kg per stand, and the use of an infusion pump is not recommended with this model.
Transporting the Infusion Stand
The inclusion of five 50mm castors increases the mobility of the Infusion Stand once assembled. This is practical for transporting the stand from one room to another, and will also prevent patients from forced staticity when using an infusion bag.
With an anti-static castor preventing the build-up of charge, and one fitted braking castor to stabilise the stand, it offers both safety and security.
Quality and Standards
Constructed from 304-grade stainless steel with a plastic centre boss, the Knockdown Infusion Stand provides a sturdy and durable design. It meets appendix A (Stability Requirements) of the British Standard BS 3619:1976 Mobile Infusion Stand, which ensures that the Infusion Stand is a safe and stable option.
The Knockdown Infusion Stand has also been CE marked, helping to provide peace of mind that it meets legislative requirements.
Technical Specifications of the Knockdown Infusion Stand
Stand and legs: 304-grade stainless steel
Centre boss: plastic
Weighted base colour: Grey
Weight: 3.8kg
Five 50mm castors (one anti-static, one braking)
Height-adjustable pole: 1270 - 2000mm
Packed size (WxDxH): 1230 x 290 x 100mm
Assembled size (WxDxH): 650 x 650 x 1270 - 2000mm
Bristol Maid Four-Hook Mild Steel Infusion Stand with Weighted Base
OV2474
Regular price
£458.70
/
Bristol Maid Four-Hook Mild Steel Infusion Stand with Weighted Base
Providing durability and convenience, the Bristol Maid Four-Hook Mild Steel Infusion Stand with Weighted Base* is a sturdy and stable Infusion Stand. Fitted with castors and offering an adjustable height, the Mild Steel Infusion Stand is a practical option for holding and transporting infusion bags.
Adjustability and Versatility
Fitted with an adjustable pole, the height of the Mild Steel Infusion Stand can be altered from between 1270 - 2000mm. This is adjusted through the convenient use of a handwheel, enabling a more suitable height depending on the requirements of both the patients and the infusion bags.
The Four-Hook Mild Steel Infusion Stand comes with four pigtail-style hooks, onto which infusion bags can be securely attached. The maximum load is 4kg per stand.
Transporting the Infusion Stand The inclusion of five 50mm anti-static castors increases the mobility of the Infusion Stand. This is practical for transporting the stand from one room to another, and will also prevent patients from forced staticity when using an infusion bag.
The anti-static castors help prevent the build-up of charge, and one fitted braking castor works to stabilise the stand when parked. The addition of a 9kg weighted base also offers increased stability for the stand.
Quality and Standards Constructed from welded mild steel, the Infusion Stand provides a sturdy and durable design. It meets appendix A (Stability Requirements) of the British Standard BS 3619:1976 Mobile Infusion Stand, which ensures that the Infusion Stand is a safe and stable option.
The Mild Steel Infusion Stand has also been CE marked, helping to provide assurance that it meets legislative requirements.
Technical Specifications of the Mild Steel Infusion Stand Construction: welded mild steel Paint colour: white Weighted base colour: grey Weight: 12.9kg Base weight: 9kg Five anti-static 50mm castors (one braking) Height-adjustable pole: 1270 - 2000mm Overall dimensions (WxDxH): 650 x 650 x 1270 - 2000mm *Please note that the image displayed shows the Two-Hook Mild Steel Infusion Stand (without the weighted base).
Bristol Maid Two-Hook Stainless Steel Infusion Stand with Weighted Base
OV2473
Regular price
£625.96
/
Bristol Maid Two-Hook Stainless Steel Infusion Stand with Weighted Base
Providing durability and convenience, the Bristol Maid Two-Hook Stainless Steel Infusion Stand with Weighted Base is a sturdy and stable Infusion Stand. Fitted with castors and offering an adjustable height, the Stainless Steel Infusion Stand is a practical option for holding and transporting infusion bags.
Adjustability and Versatility
Fitted with an adjustable pole, the height of the Stainless Steel Infusion Stand can be altered from between 1270 - 2000mm. This is adjusted through the convenient use of a handwheel, enabling a more suitable height depending on the requirements of both the patients and the infusion bags.
The Two-Hook Stainless Steel Infusion Stand comes with two pigtail-style hooks, onto which infusion bags can be securely attached. The maximum load is 4kg per stand.
Transporting the Infusion Stand
The inclusion of five 50mm anti-static castors increases the mobility of the Infusion Stand. This is practical for transporting the stand from one room to another, and will also prevent patients from forced staticity when using an infusion bag.
The anti-static castors help prevent the build-up of charge, and one fitted braking castor works to stabilise the stand when parked. The addition of a 9kg weighted base also offers increased stability for the stand.
Quality and Standards
Constructed from welded stainless steel, the Infusion Stand provides a sturdy and durable design. It meets appendix A (Stability Requirements) of the British Standard BS 3619:1976 Mobile Infusion Stand, which ensures that the Infusion Stand is a safe and stable option.
The Stainless Steel Infusion Stand has also been CE marked, helping to provide assurance that it meets legislative requirements.
Technical Specifications of the Stainless Steel Infusion Stand
Construction: welded stainless steel
Weight: 12.8kg
Base weight: 9kg
Five anti-static 50mm castors (one braking)
Height-adjustable pole: 1270 - 2000mm
Overall dimensions (WxDxH): 650 x 650 x 1270 - 2000mm
*Please note that the image displayed shows the Two-Hook Stainless Steel Infusion Stand (without the weighted base).
Customer Reviews
Bristol Maid Heavy Duty Two Hook Infusion Stand
OV2471
Regular price
£485.20
/
Bristol Maid Heavy Duty Two Hook Infusion Stand
The Bristol Maid Heavy Duty Two Hook Infusion Stand is an easy to clean, heavy duty infusion stand. The Bristol Maid Heavy Duty Two Hook Infusion Stand has five leg base with a low centre of gravity to assist with stability of the stand.
The Bristol Maid Heavy Duty Two Hook Infusion Stand has defined edges and contours that ensure that all key surfaces are accessible, allowing for easy & effective cleaning (including steam cleaning).
Features of the Bristol Maid Heavy Duty Two Hook Infusion Stand Five leg design with low centre of gravity to assist stability Heavy duty steel base with seamless polyurethane over moulding providing a flexible tear & water resistant finish, along with impact protection to the patient & fabric of the building Defined edges & contours ensure that all key surfaces are accessible, allowing for easy & effective cleaning (including steam cleaning) Fully welded construction with 25mm diameter scratch resistant stainless steel upright Polymer 50mm twin wheel castors shielded from fluid Height adjustable stainless steel pole using a handwheel (1300 to 2100mm) Two seamlessly welded pigtail hooks Maximum load on hooks 4kg (per stand) Suitable for use with two infusion pumps/syringe drivers Colour option available Specifications of the Bristol Maid Heavy Duty Two Hook Infusion Stand 620 x 620 x 1300 - 2100mm 8kg Standards Meets appendix A (Stability Requirements) of BS 3619:1976 Mobile Infusion Stands
Bristol Maid Four-Hook Stainless Steel Mobile Infusion Stand
OV2470
Regular price
£452.08
/
Bristol Maid Four-Hook Stainless Steel Mobile Infusion Stand
In a professional medical environment, having the proper equipment on hand is crucial to providing consistent, high quality medical care. The Bristol Maid Four-Hook Stainless Steel Mobile Infusion Stand is a versatile, hygienic and stable stand for infusion procedures, allowing doctors and nurses to provide reliable and safe infusions to patients.
Stable and Reliable
When selecting an appropriate infusion stand, stability is perhaps the most important factor to consider. This stand meets appendix A (Stability Requirements) of BS3619:1976 Mobile Infusion stands, so medical professionals can have peace of mind that their infusion procedures are carried out in a safe and responsible manner. The seamlessly welded stainless steel frame is sturdy enough to support infusion bags and equipment, and is easy to clean, allowing for safe, hygienic treatment.
Adjustable and Versatile
To make this infusion stand as versatile and useful as possible, it features a height adjustable pole, which can be manipulated with the use of a handwheel. Height is adjustable from 1270 to 2000mm. The stand is highly mobile, featuring polypropylene 50mm twin wheel castors, one of which is anti-static, for reliable, safe transportation.
Key Features
Stable, hygienic and reliable mobile infusion stand
Complies with Stability Requirements of with BS3619: 1976 Mobile Infusion Stands
Seamlessly welded stainless steel frame
Four sturdy steel pigtail hooks
Max recommended load is 4kg on hooks (per stand)
Height adjustable pole using a handwheel (1270 to 2000mm)
Easy to clean stainless steel finish
Polypropylene 50mm twin wheel castors (1 x anti-static)
Bristol Maid Four-Hook Mild Steel Mobile Infusion Stand
OV2469
Regular price
£356.03
/
Bristol Maid Four-Hook Mild Steel Mobile Infusion Stand
In a professional medical environment, having the proper equipment on hand is crucial to providing consistent, high quality medical care. The Bristol Maid Four-Hook Mild Steel Mobile Infusion Stand is a versatile and stable stand for infusion procedures, allowing doctors and nurses to provide reliable and safe infusions to patients.
Stable and Reliable
When selecting an appropriate infusion stand, stability is perhaps the most important factor to consider. This stand meets appendix A (Stability Requirements) of BS3619: 1976 Mobile Infusion stands, so medical professionals can have peace of mind that their infusion procedures are carried out in a safe and responsible manner. The one-piece mild steel welded frame is sturdy enough to support infusion bags and equipment, and will allow for safe, hygienic treatment.
Adjustable and Versatile
To make this infusion stand as versatile and useful as possible, it features a height adjustable pole, which can be manipulated with the use of a handwheel. Height is adjustable from 1270 to 2000mm. The stand is highly mobile, featuring polypropylene 50mm twin wheel castors, 1 of which is antistatic, for reliable, safe transportation.
Key Features
Stable and reliable mobile infusion stand
Complies with Stability Requirements of with BS3619: 1976 Mobile Infusion Stands
One-piece mild steel welded frame
Four sturdy pigtail hooks
Max recommended load is 4kg on hooks (per stand)
Height adjustable pole using a handwheel (1270 to 2000mm)
Finished in a durable white epoxy polyester powder paint
Polypropylene 50mm twin wheel castors (1 x anti-static)
Terumo Versatus Winged and Ported IV Cannula 20g (Pink) 32mm x 50
OV967
Regular price
£59.74
/
Terumo Versatus Winged and Ported IV Cannula 20g (Pink) 32mm x 50
The catheter is made from polyurethane which is firm at room temperature and softer at body temperature, kink resistant and biocompatible: patient comfort is enhanced. This catheter is radio-opaque.
The quality of the bevel of the internal needle ensures a precise incision.
The perfectly tapered catheter tip allows the catheter to enter the vein without causing any venous trauma and an easy placement of the catheter. In this way the comfort of the patient is guaranteed. The optimum bevel / catheter tip distance reduces the risk of passing through the vein.
The winged catheter hub ensures easy fixation of the catheter. The EN/ISO coloured hub of the Versatus¨ range with wings confirms the catheter size.
The injection port allows the intermittent injection of medicines during infusion. Due to central position there are less risks of damaging the vein and patient trauma during intermittent injection.
BD Push Button Blood Set 25g x 0.75 Per 50 With Luer Adaptor 7 Tubing
OV966
Regular price
£113.02
/
BD Push Button Blood Set 25g x 0.75 Per 50 With Luer Adaptor 7 Tubing
The BD Vacutainer® Push Button Collection Set is the only blood collection system with push-button technology.
The BD Vacutainer® Push Button Collection Set offers split-second protection for that single moment which could potentially change your life.
The push-button safety mechanism instantly helps protect you against needlestick injury. Its in-vein activation reduces risk of healthcare worker exposure to a contaminated needle, provides easy activation without patient discomfort, and is ideal for use in high-risk environments.
The one-handed safety activation of the push button allows for activation of the safety mechanism while still attending to the patient/venipuncture site, and provides easier, safer blood collection for the healthcare worker, with no compromise to patient care.
Tubing: length 30 cm, kink-resistant, flexible, good readjusting properties, transparent
Latex-free
Lock fitting
Closing cone lock
Surshield Versatus Winged and Ported IV Cannula - 20G x 32mm x 50
OV963
Regular price
£82.68
/
Surshield Versatus Winged and Ported IV Cannula - 20G x 32mm x 50
The passive safety mechanism of the Surshield Versatus IV catheters can beÊeasily activated with one hand.ÊThe needle tip is completely encapsulated preventing accidental needle stick injuries.
The Versatus catheters are made out of special medical grade polyurethane which becomes very soft at body temperatureÊensuring patient comfort.
The unique Terumo needle point design and precisely honed bevel edges in combination with the perfectly tapered and siliconised catheterÊallow a smooth and nearly painless placement.
Additionally the Versatus catheters are opaque and kink resistant further improving the patient comfort and safety. The large range in catheters and related obturators allows the best choice for a wide range of applications.
Surshield Versatus Winged and Ported IV Cannula - 22G x 25mm x 50
OV962
Regular price
£82.68
/
Surshield Versatus Winged and Ported IV Cannula - 22G x 25mm x 50
The passive safety mechanism of the Surshield Versatus IV catheters can beÊeasily activated with one hand. The needle tip is completely encapsulated preventing accidental needle stick injuries.
The Versatus catheters are made out of special medical grade polyurethane which becomes very soft at body temperatureÊensuring patient comfort.
The unique Terumo needle point design and precisely honed bevel edges in combination with the perfectly tapered and siliconised catheterÊallow a smooth and nearly painless placement.
Additionally the Versatus catheters are opaque and kink resistant further improving the patient comfort and safety. The large range in catheters and related obturators allows the best choice for a wide range of applications.
BD Push Button Blood Set 25g x 0.75 Per 50 With Luer Adaptor 7 Tubing
OV961
Regular price
£113.02
/
BD Push Button Blood Set 25g x 0.75 Per 50 With Luer Adaptor 7 Tubing
The BD Vacutainer¨ Push Button Collection Set is the only blood collection system with push-button technology.
The BD Vacutainer¨ Push Button Collection Set offers split-second protection for that single moment which could potentially change your life.
The push-button safety mechanism instantly helps protect you against needlestick injury. Its in-vein activation reduces risk of healthcare worker exposure to a contaminated needle, provides easy activation without patient discomfort, and is ideal for use in high-risk environments.
The one-handed safety activation of the push button allows for activation of the safety mechanism while still attending to the patient/venipuncture site, and provides easier, safer blood collection for the healthcare worker, with no compromise to patient care.
BD Safety-Lok Blood Set 25g x 0.75 Per 50 W/out Luer Adaptor 12 Tubing
OV960
Regular price
£47.35
/
BD Safety-Lok Blood Set 25g x 0.75 Per 50 W/out Luer Adaptor 12 Tubing
As a healthcare provider, you face the challenging task of providing high quality patient care.
BD Vacutainer¨ Safety-Lokª Blood Collection Sets allow you to deliver exceptional patient care without compromising personal safety.
The BD Vacutainer¨ Safety-Lokª Blood Collection Set meets OSHA safety standards, with needles that can be easily shielded with one-handed activation.
This product is intended for blood collection and infusion procedures.
VACUETTE¨ TUBE 3 Ml K2E K2EDTA 13x75 Lavender Capblack Ring, PREMIUM - Pack of 50
OV958
Regular price
£14.70
/
VACUETTE¨ TUBE 3 Ml K2E K2EDTA 13x75 Lavender Capblack Ring, PREMIUM - Pack of 50
VACUETTE¨ TUBE 3 Ml K2E K2EDTA 13x75 Lavender Capblack Ring, PREMIUM - Pack of 50
Blood pump/gravity double chamber set with Line Label
OV957
Regular price
£7.06
/
Blood pump/gravity double chamber set with Line Label
Colleague pump/gravity blood admin set, flexible double chamber with ball valve, 200µm filter, Clickluer rotary connector with Safeprime cap, Line Label, 225cm
BD Venflon Peripheral IV Catheter Ported 14g, 45mm - Winged x 50
OV952
Regular price
£83.78
/
BD Venflon Peripheral IV Catheter Ported 14g, 45mm - Winged x 50
Box of 50 14G x 45 mm BD Venflon™ Peripheral IV Catheter with Injection port. Sterile, single use. Orange
BD Venflon™ intravenous catheter with integrated injection port and valve for peripheral catheterisation.
Permits needle-free administration of bolus medications during infusion.
Back-cut needle bevel and tapered end of the PTFE catheter allows easier insertion and minimises the risk of vein damage.
Wing position reduces the risk of bacterial contamination by preventing any direct contact between the rear of the catheter hub and the skin. Utilising the wings, immobility of the catheter can be further insured by the application of the BD Veca-C™ and BD Veca-Fix™ IV dressing.
BD Connecta Plus Stopcock for pressure monitoring. 3-way with rotating luer lock with colour coding pegs. Single use, sterile.
BD Venflon Pro Safety 20g x 32mm, Pink - Box of 50
OV947
Regular price
£87.97
/
BD Venflon Pro Safety 20g x 32mm, Pink - Box of 50
BD Venflon™ Pro Safety
Developed to help minimise the risk of unanticipated blood splash and needlestick injuries
Robust needle tip protection – fully encapsulates needle tip
Ease of penetration (small or fragile veins)
Reliable insertion characteristics
BD Vialon™ – Proven easy insertion and longer in dwell times
An award winning design for clinical best practice
Ergonomically designed to allow for a variety of user techniques and to aid insertion
BD Connecta™ Plus Stopcock with extension line
OV946
Regular price
£110.96
/
BD Connecta™ Plus Stopcock with extension line
BD Connecta Plus Stopcock for pressure monitoring. 3-way with rotating luer lock with colour coding pegs and a 10cm extension line. Single use, sterile.
Bionector T Piece with Luer-Lock 10cm - Pack of 20
OV0822.111
Regular price
£112.32
/
Bionector T Piece with Luer-Lock 10cm - Pack of 20
Luer-lock 'T' connector with Bionector allows intermittent injection via latex-free membrane during simultaneous infusion.
'T' connectors are ideal for general veterinary ward and theatre use as they can be pre-placed and heparinised by nursing staff on admission, even before a plan has been made regarding drug and infusion administration.
They are a universal IV solution, veterinary surgeons are able to administer drugs and rapidly connect infusion lines at will to any patient.
Significant time savings are possible in veterinary wards and theatres if in-patients routinely have a Bionector 'T' piece in place
BD Safety-Lok Blood Set 21g x 0.75 x 50 W/out Luer Adaptor 12 Tubing - Single
OV367246
Regular price
£1.27
/
BD Safety-Lok Blood Set 21g x 0.75 x 50 W/out Luer Adaptor 12 Tubing - Single
As a healthcare provider, you face the challenging task of providing high quality patient care.
BD Vacutainer¨ Safety-Lokª Blood Collection Sets allow you to deliver exceptional patient care without compromising personal safety.
The BD Vacutainer¨ Safety-Lokª Blood Collection Set meets OSHA safety standards, with needles that can be easily shielded with one-handed activation.
This product is intended for blood collection and infusion procedures.
Gravity Solution Administration Set - Pack of 100
OVTRC3320
Regular price
£131.88
/
Gravity Solution Administration Set - Pack of 100
Features:
Gravity solution admin set
Ented/unvented,
15µm filter
Roller clamp
Needle Y-site,
Click luer rotary connector with Safeprime cap
Terumo Surflo Winged Infusion Set 23G Light Blue with 300mm Tubing 1x50
OVTUSV-23NL30
Regular price
£53.14
/
Terumo Surflo Winged Infusion Set 23G Light Blue with 300mm Tubing 1x50
With 30cm tubing.
Terumo's soft, flexible interlocking wings readily conform to the body's contour. The wing is angled for ease of positioning of the needle during venipuncture, for less risk of vessel damage or occlusion of the lumen. The precisely honed needle with Ultra-Thin wall design assures ease of penetration and continued access with a single insertion. DEHP Free.
Venofix Butterfly Cannula 21G Green x 50
OV934
Regular price
£48.25
/
Venofix Butterfly Cannula 21G Green x 50
Made of high quality chrome nickel-steel
Micro siliconized precision bevel
Interlocking wings with structured grip surface
Tubing: length 30 cm, kink-resistant, flexible, good readjusting properties, transparent
Latex-free
Lock fitting
Closing cone lock
BD Vacutainer Safety Lok Blood Set 23g x 7" Tubing x 50
OV367284
Regular price
£51.32
/
BD Vacutainer Safety Lok Blood Set 23g x 7" Tubing x 50
BD Vacutainer¨ Safety-LokTM Blood Collection Sets are sterile closed systems for drawing blood from difficult veins, such as the back of the hand, and their use helps to minimise the risk of false positives in the case of collection of blood cultures.
The BD Vacutainer¨ Safety-Lokª Blood Collection Set is simple, easy to use and is safety-engineered.Ê
The safety mechanism can be activated immediately after the blood draw and helps protect against needlestick injury.
Tubing length 7Ó
BD Vacutainer One-Use Non-Stackable Holder x 250
OV932
Regular price
£14.26
/
BD Vacutainer One-Use Non-Stackable Holder x 250
Compatible with the entireÊBD Vacutainer¨ System ofÊBlood Collection products
Helps customers to complyÊwith the OSHA Safety andÊHealth Information BulletinÊ(SHIB) on the Disposal ofÊContaminated NeedlesÊand Blood Tube HoldersÊUsed for Phlebotomy
Vacutainer Blood Set 23g x 3/4 7" - Single
OVVS367284
Regular price
£3.48
/
Vacutainer Blood Set 23g x 3/4 7" - Single
BD Vacutainer Safety-Lok Blood Collection Set
Single-handed safety activation with irreversible locking mechanism, confirmed with an audible click
Venofix Butterfly Cannula 21G Green - Box of 100
OV000246083
Regular price
£53.14
/
Venofix Butterfly Cannula 21G Green Single - Box of 100
Made of high quality chrome nickel-steel
Micro siliconized precision bevel
Interlocking wings with structured grip surface
Tubing: length 30 cm, kink-resistant, flexible, good readjusting properties, transparent
