Patient Hoists

Emergency Manual Handling Pack Standard (80 x 195cm)

Do you have all the necessary equipment readily available in the event of an emergency? The Emergency Manual Handling Pack is a designated lifting sheet for use when there is no hoist available and you need to raise someone from the floor in a horizontal position, ensuring you are always prepared.

Key Features of the Emergency Handling Pack

• Designed to help manoeuvre a collapsed patient
• In line with the Guidelines for Safer Handling
• Fully waterproof and fire retardant
• Must be used by a minimum of eight people to lift
• Can be washed at 74°C for three minutes 
• Maximum patient weight of 20 stone (127kg)
• Available in two sizes, Standard and Large

How Do I Use the Emergency Manual Handling Pack?

The Emergency Handling Pack contains a small slide sheet, a pair of flat slide sheets and a set of extension straps, plus a designated lifting sheet. Tested up to 127kg (20 stone), this product provides a safer alternative for those situations when you have no other choice than to lift manually. The following is advised when lifting:

• The transfer must be well-planned and all rescuers briefed. A total of eight people will be required to assist.
• One person should coordinate the commands and lifting activity, and this person is required to support the head.
• Ensure that the designated lifting sheet is available, and a scoop stretcher may be used.
• Log roll the patient onto the lifting sheet.
• A minimum of three people are positioned on each side of the patient.

To learn how to handle a collapsed person safely, watch the video below:

Where Can the Emergency Manual Handling Pack Be Used

The Emergency Handling Pack is suitable for any emergency situation involving a collapsed person. It is most commonly used in:

• Acute trusts
• Community care
• Rapid response teams
• Nursing and care homes
• Hospices
• Social services

Emergency Lifting Sheet Standard (80 x 195cm)

Look after your staff by providing them with this simple and cost-effective answer to a potential problem. The Emergency Lifting Sheet is designed specifically for lifting in emergency situations where there is no other suitable equipment available. Strong, robust, fully waterproof and fire retardant, this sheet has been designed in conjunction with the Guidelines for Safer Handling during Resuscitation in Healthcare Settings and is tested to 20 stone (127kg).

Key Features of the Emergency Lifting Sheet

• Designed for raising someone from the floor in a horizontal position
• Ideal for situations where there is no stretcher hoist available
• Can be washed at 74°C for three minutes for better hygiene
• Fully waterproof and fire retardant for maximum security
• Requires a minimum of eight people to lift
• Maximum patient weight of 20 stone (127kg)
• Available in two sizes, Standard and Large

Benefits of Owning an Emergency Lifting Sheet

This Lifting Sheet is designed for use where there is no hoist available and you need to raise someone from the floor in a horizontal position. Strong, robust, fully waterproof and fire retardant, this sheet has been designed in conjunction with the Guidelines for Safer Handling during Resuscitation in Healthcare Settings and is tested to 20 stone (127kg).

How to Use the Lifting Sheet?

The Lifting Sheet is designed to be incredibly easy to use. Still, the following steps are advised when using the sheet:

• The transfer must be well-planned and all rescuers briefed. In total eight people will be required to assist.
• One person should coordinate the commands and lifting activity, and this person is also required to support the head.
• Ensure that a designated shifting sheet is available. A scoop stretcher may be used.
• Log roll the patient onto the lifting sheet.
• A minimum of three people are positioned on each side of the patient.

To learn how an emergency lift should be carried out, watch the video below:

Where to Use the Lifting Sheet?

The Emergency Lifting Sheet is ideal for all situations where there is no other suitable equipment available. It is most commonly used in:

• All areas of healthcare
• Emergency services
• Social services
• Nursing and care homes

Disposable Stretcher Sling Lifting Aid (Pack of 5)

Moving patients with reduced mobility can be tricky to do without disturbing the patient or causing additional strain on the carer. The Disposable Stretcher Sling Lifting Aid (Pack of 5) eliminates any worries and allows you to safely and securely transfer patients in a lying position. This pack of five single-use slings have been created to be used in conjunction with the Stretcher Bar, a device that has been especially designed for aiding supine transfers.

Safe Horizontal Transfers

The Disposable Stretcher Sling works perfectly with the Stretcher Bar on a mobile or stationary lift to ensure supine lifts and transfers can be carried out safely, especially when dealing with fragile or pain-sensitive patients. Each sling in this pack of five features ten suspension points - five on each side of the patient - which provide support for the entire body.

Features and Benefits of the Stretcher Sling

• Pack of five single-use slings
• Facilitates full body sling for horizontal patient lifting
• Five lift straps on each side of the lifting sling
• Made from strong, non-woven material
• Handles user weight of up to 300kg (660lb)
• Disposable to prevent the spread of infectious bacteria
• Easy for the carer to apply and remove
• Gives the patient an added sense of security

Keeping Bacteria at Bay

The Disposable Stretcher Sling is made from a sturdy, durable non-woven material that can handle up to 300kg in weight. Instead of laundering, the lifting sling is discarded after use, when it becomes soiled or when the patient no longer needs it. This prevents the spread of multi-resistant and other types of infectious bacteria, which is especially important in hospital environments.

Applications of the Stretcher Sling

The sling can be applied to many different lifting and transfer situations, some of which include:

• Supine transfer from bed to bed
• Lifting from floor to bed
• Moving a patient higher up in bed

Disposable High Back Lifting Sling (Pack of 5) Small

The Disposable High Back Lifting Sling (Pack of 5) is used in most common lifting situations, such as sitting transfers between bed and wheelchair, and when the user needs extra head support. This pack of five slings are designed for short-term use and should be discarded shortly after use in order to stop the spread of infectious bacteria.

Features of the Disposable High Back Sling

• Five different sizes for an individualised fit
• Made from disposable material to be discarded after use
• Stops the spreading of multi-resistant or infectious bacteria
• Reinforced head and leg supports for comfort and security
• Easy for the caregiver to apply and remove
• High back; the user is supported from the tailbone and up over the head
• User maintains a slightly reclined seated posture

Prevents Spread of Bacteria

This pack of five Disposable High Back Slings are intended for short-term use on singular patients. The sling is made from a durable, non-woven material that instead of laundering is discarded after use, when it becomes soiled or when the user no longer needs it.

Due to its disposable nature, the Disposable High Back Sling prevents the spread of multi-resistant and other types of infectious bacteria. This is in order to maintain the highest levels of hygiene, which is especially important in hospital and clinic environments.

Sizing of the Disposable High Back Lifting Sling

The Disposable High Back Lifting Sling is supplied in a pack of five single-use slings, and available to buy in a choice of different sizes. It is essential to ensure that the width of the Sling Bar is appropriate for the sling size and the patient’s status and capacity.

Please refer to the table below for more information about the measurements of each sling and the weight load that has been recommended each size should carry:

Please note that sling can handle a load of up to 200kg (except the XX-Large which can handle up to 300kg), however users are recommended to follow the weight guidelines above.

Days Patient Helper Hoist

The Days Patient Helper Hoist is designed to raise a person to a sitting position and offer help to those who find it difficult to rise out of bed. With its height adjustable plastic grip, this hoist is compatible with virtually any bed.

Features and Benefits of the Days Patient Helper

• Provides stable overhead support for rising out of bed
• Designed for raising a person to a sitting position
• Moulded plastic grip with adjustable height
• Can be disassembled into three pieces for easy transportation
• Holds a maximum weight of 125kg (19.5 stone)

Using the Patient Helper Hoist

This free-standing Patient Helper is placed under the bed base to provide stable overhead support for those who find it difficult to rise out of bed. It is designed only for raising a person to a sitting position and not lifting the entire weight of the person off the bed.

Due to its height adjustable plastic hand grip, the Patient Helper can be used with various beds and easily accommodated. For convenient storage and transportation, it can be disassembled into three pieces.

Technical Information

• Adjustable height: 95 - 131cm (37.5 - 51.5")
• Minimum required clearance: 4.5cm (1.75")
• Overall height: 191cm (75")
• Overall width: 80cm (31.5")
• Overall depth: 61cm (24")

Classic Netted Lifting Sling Extra Small

The Classic Netted Lifting Sling enables a safe and comfortable seated position and gives the user a sense of security as they are being lifted. The Classic Sling is designed for use in most usual lifting situations, such as sitting transfers between bed and wheelchair. The sling is still suitable to use for patients with leg amputations and other lower body disabilities.

Full Back Support

The Classic Sling is a functional lifting accessory that provides support all the way from the hollow of the knees up to the shoulders. The design makes the patient feel comfortable and secure as they are being transferred.

Features of the Classic Netted Lifting Sling

• Five sizes to accommodate different users
• Undivided leg supports
• Designed to be kept under user after completed transfer
• Made from breathable, polyester net fabric
• Easy for the caregiver to apply and remove
• High back; the user is supported from hollows of the knees up to the shoulders
• Keeps the patient in an upright seated posture
• Particularly suitable for users with painful joints

Airy, Netted Material

The Classic Netted Lifting Sling allows for a comfortable and secure seated transfers from bed to wheelchair, or vice versa. It is made from an airy, polyester net material that is designed to be left under the user after transfer, meaning that the patient remains siting on the sling until they are lifted again.

Sizing of the Classic Netted Sling

Patient-specific slings should be comfortable and ensure their personal safety and hygiene. The Classic Sling is available in five sizes in order for you to choose the perfect fit, and all sizes are adaptable to be used in both 2- and 4-point suspension.

It is essential to ensure that the width of the Sling Bar is appropriate for the sling size and the patient’s status and capacity. Please refer to the table below for more information about the measurements of each sling:

Please note that though the sling can handle loads of up to 300kg, the recommended weight guidelines should still be followed.

Casa Lift Hoist

In a medical environment, patient lifting devices need to be versatile and highly manoeuvrable to be able to adapt to all of the challenges that may come up during day-to-day care. The Casa Lift Hoist is designed to handle virtually any circumstance, as it features a lightweight frame, high lifting range, and wide leg width adjustment to allow easy transport around furniture and other obstacles. Easy to dismantle, this ultra-portable hoist provides care teams with the best in flexibility and versatility.

Key Features

• Easy manoeuvrability and access due to wide leg width adjustment
• Four castors provide smooth rolling and effortless movement
• Lightweight frame is easy to position, allowing the user a lower lifting position
• Low lifting position facilitates easy patient lifting from the floor or low surfaces
• Compact design allows the hoist to move through most domestic doorways
• High lifting range and safe working load to handle virtually any challenge
• Supplied with an ergonomic, user-friendly handset for simple operation
• Handset features patient lifting symbols and well-protected recessed buttons
• Handset is designed with a  magnetic back to easily secure it to the hoist frame
• Actuator features an emergency lowering function, easier to control than quick-release actuators
• Cable can be exchanged if damaged, rather than replacing the whole actuator
• Control box features emergency stop and lowering functions with audible low battery alarm
• Can be easily dismantled in seconds for stress-free transportation and storage
• All components are interchangeable and replaceable

Highly Versatile Lifting

This hoist is prepared for any challenge a medical environment may pose, as it is easy to manoeuvre while featuring a high lifting range and exceptional safe working load. These features make it suitable for use with virtually any patient and for any lifting purpose.

Compact and Manoeuvrable

The compact design of this hoist allows it to move through most domestic doorways and into almost any environment. The lightweight frame and wide leg width adjustment make for easy manoeuvrability, and also provide the ability to position the hoist to allow the user to achieve a lower lifting position from the floor. Combined with the four high-quality castors, these features make this hoist easy to move for extremely efficient patient care.

Carina 350EM/350EE Mobile Patient Lift Carina350EM

The Carina 350EM/350EE Mobile Patient Lift is a collapsible, mobile patient lift adapted for safe and easy lifting of users weighing up to 165kg (350lb). It offers a unique combination of functionality, performance and quality in relation to price, it is delivered complete and ready to use and is equipped with a stable steel sling bar with reliable safety latches. The Mobile Lift is available in two models (350EM or 350EE) with manual or electrical base widening, both of which are sturdy, stable, lightweight and safe to use.

Features of the Carina 350 Mobile Patient Lift

• Manual (EM) or Electrical (EE) base widening
• Stable and secure, still comparatively light-weight
• Handles a user weight of up to 165kg (350lb)
• Foldable for convenient transportation and storage
• Large lifting range makes it excellent for low and high lifting
• Maintenance-free, encapsulated twin castors for easy rolling
• Ergonomic and easy to manoeuvre in order to prevent work-related injuries
• Emergency stop button readily available on the control box
• Manual and electrical emergency lowering
• High capacity battery with long service life and built-in charging

Flexible and Versatile

The Carina 350 has a relatively narrow and compact design, which means that the lift can fit into and reach practically anywhere, even in tight spaces. In spite of the handy size, the Carina 350 offers a very large lifting range, meaning that it can manage most lifting situations and requirements, from low or high, seated or supine, to and from the floor, bed or chair.

Easy Set Up

The Carina 350 is supplied folded, but requires a very simple set up and operation without the use of tools. This makes the Mobile Lift easy to fold or set up, and requires little space during transportation and storing. The lift can be used in all situations and when it is needed more elsewhere, it is easy to move between different users, rooms and homes.

Technical Specifications

• Base widening: Manual (EM) or Electrical (EE)
• Material: Powder-coated steel
• Total height: 1290 - 1840mm
• Total weight: 34.5kg (EM) or 36kg (EE)
• Sliing bar width: 450mm
• Diameter of castors: 100mm
• Lifting range: 580 - 1680mm
• Lifting speed without load: 23mm/s
• Safe working load: 165kg
• Battery capacity: 2.9 Ah

AmpSling Netted Lifting Sling Extra Small

The AmpSling Netted Lifting Sling enables the safe and comfortable lifting of users, particularly during sitting transfers between bed and wheelchair, even where a sling without separated leg sections is preferred. The AmpSling has been specifically created to safely lift patients with double or high leg amputations, and offers full support from the tailbone up to the head and under the legs. The breathable polyester net material also allows for the sling to be kept under the patients after the transfer has been completed.

Safe Transfer of Amputees

The AmpSling Netted Sling is a functional and comfortable lifting accessory that has been designed for use by patients with double and/or high leg amputations. It is ideal to use for most common transfers such as from bed to wheelchair, chair to wheelchair, or wheelchair to toilet. The design makes it quick and easy for the carer to apply in preparation for a transfer or a lift.

Features of the AmpSling Netted Lifting Sling

• Six different sizes to get an individualised fit
• Smaller opening to suit users with high leg amputations
• Divided leg supports for comfort
• Made from breathable, polyester net fabric
• Easy for the caregiver to apply and remove
• High back so the user is supported from the tailbone up to the head
• Keeps the patient in an upright seated posture
• Pocket at lower edge for easier application

Breathable Polyester Net Material

This sling is designed for comfortable and secure seated transfers from bed to wheelchair, or vice versa. It is made from an airy, polyester net material that is designed to be left under the user after transfer, meaning that the patient remains sitting comfortably on the sling until they are ready to be lifted again.

Sizing of the AmpSling Netted Sling

The AmpSling is available in a choice of six different sizes, and is adaptable to be used in both 2 and 4-point suspension. It is essential to ensure that the width of the Sling Bar is appropriate for the sling size and the patient’s status and capacity. Please refer to the table below for more information about the sizing:

Please note that though the sling can cope with a maximum load of 300kg, the recommended weight guidelines should still be followed.

AmbulationArm for the Eva Mobile Patient Lift

Those who use any variation of the Eva Mobile Patient Lift will know what a versatile device it is for gait training and most transfer situations. The AmbulationArm is an aluminium support handle that can be installed on the Eva to provide support to the patient during gait training. The arm rests are long and therefore enable many gripping alternatives for different patients during the entire gait training exercise.

Versatile Patient Transfers

The Eva Mobile Lift is suitable to use in most lifting situations, lifting patients from seated or supine positions, and even aiding in standing or walking training. The lift is largely made of aluminium and has encapsulated dual castors, which makes it easy and smooth to manoeuvre, even on soft, carpeted surfaces.

How to Use the AmbulationArm

The AmbulationArm is installed from the rear of the lift, outside of the handlebar. The height of the arm is easily adjusted to the patient's height by changing the height of the mast.

When a WalkingVest has been hung on the sling bar and placed around the patient, they can then grasp arm rests and to slowly stand up and begin standing or walking training.

A safe working load for the AmbulationArm is 60kg. Patients should not place their full weight on the arm rests.

Alerta Powerlifter Mini 135 Patient Lifting Hoist

When transferring patients with low levels of mobility, reliable hoists and transfer aids must be used, but it can be difficult to find a reliable hoist at an affordable price. The Alerta Powerlifter Mini 135 Patient Lifting Hoist is an excellent patient lifter for home care, hospital and care home environments, providing secure transfers at a relatively low price. Powered by the Linak control system, this easy-to-use hoist includes an anti-swing, rubber-coated spreader bar to ensure transfers are as smooth and safe for patients as possible.

Key Features

• Cost-effective hoist for home care, hospital and care home environments
• Provides a smooth and calm transfer experience for patients
• Easy-to-use with tool-free assembly and setup
• Thermoplastic rubber-coated, anti-swing spreader bar for smooth transfers
• Powered by the reliable Linak jumbo control system 
• Emergency stop button to provide peace of mind to carers
• Spreader bar features 360° rotation for versatility
• Audible and visual low battery alarms to alert carers
• Rear castors include single brake to ensure stability
• Disassembles into two parts for ease of storage and transport
• Ergonomic handle allows for easy adjustments
• Leg spread device located within the chassis to reduce footprint
• Complies with all quality and use standards for hoists
• Anti-entrapment measure to enhance safety
• SWL: 135kg

Easy Assembly and Operation

The Mini 135 Hoist is designed to be as user-friendly as possible, as it can be assembled without the use of tools, and disassembles into two parts for ease of transport and storage. Ergonomic handles make movement simple for the carer, allowing the patient to be positioned correctly in seconds for the most efficient and safe transfers possible.

Anti-Swing Bar for Smooth Transfers

It's important to ensure patients are as calm and comfortable as possible during transfers, which is why this hoist includes a thermoplastic rubber-coated, anti-swing spreader bar. Providing excellent stability throughout movement, this bar has the ability to rotate a full 360°, allowing easy positioning and excellent versatility during patient transfers.

Reliable Linak Jumbo Control System

The Linak control system of this hoist helps to boost patient safety, as it includes features like an emergency stop button and an audible and visible low battery alarm. This electrical system is the gold standard for hoist controls, allowing carers to easily adjust settings to suit the particular patient being transferred.

Compact Base

To save as much space as possible, the Mini 135's leg spreading device is located within the chassis, reducing the overall footprint. This makes the hoist easier to manoeuvre into smaller spaces, allowing for easy transfers in a range of environments.

Stable Polyamide Wheels

For maximum ease of movement, the hoist sits on 100mm double wheels with polyamide support, ensuring smooth movements. It also incorporates a single brake on the rear wheels, allowing excellent stability during transfers. 

Three Hoists Available

The Alerta Powerlifter range of hoists includes three sizes to suit different environments and applications:

• Alerta Powerlifter Mini 135 Patient Lifting Hoist
  • Safe working load: 135kg
  • Lift height: 330 - 1350mm
  • Base dimensions (WxL): 530 x 1130mm

• Alerta Powerlifter Midi 150 Patient Lifting Hoist
  • Safe working load: 150kg
  • Lift height: 340 - 1470mm
  • Base dimensions (WxL): 540 x 1230mm

• Alerta Powerlifter Maxi 175 Patient Lifting Hoist
  • Safe working load: 175kg
  • Lift height: 450 - 1590mm
  • Base dimensions (WxL): 630 x 1360mm

Alerta Powerlifter Midi 150 Patient Lifting Hoist

When transferring patients with low levels of mobility, reliable hoists and transfer aids must be used, but it can be difficult to find a reliable hoist at an affordable price. The Alerta Powerlifter Midi 150 Patient Lifting Hoist is an excellent patient lifter for home care, hospital and care home environments, providing secure transfers at a relatively low price. Powered by the Linak control system, this easy-to-use hoist includes an anti-swing, rubber-coated spreader bar to ensure transfers are as smooth and safe for patients as possible.

Key Features

• Cost-effective hoist for home care, hospital and care home environments
• Provides a smooth and calm transfer experience for patients
• Easy-to-use with tool-free assembly and setup
• Thermoplastic rubber-coated, anti-swing spreader bar for smooth transfers
• Powered by the reliable Linak jumbo control system 
• Emergency stop button to provide peace of mind to carers
• Spreader bar features 360° rotation for versatility
• Audible and visual low battery alarms to alert carers
• Rear castors include single brake to ensure stability
• Disassembles into two parts for ease of storage and transport
• Ergonomic handle allows for easy adjustments
• Leg spread device located within the chassis to reduce footprint
• Complies with all quality and use standards for hoists
• Anti-entrapment measure to enhance safety
• SWL: 150kg

Easy Assembly and Operation

The Midi 150 Hoist is designed to be as user-friendly as possible, as it can be assembled without the use of tools, and disassembles into two parts for ease of transport and storage. Ergonomic handles make movement simple for the carer, allowing the patient to be positioned correctly in seconds for the most efficient and safe transfers possible.

Anti-Swing Bar for Smooth Transfers

It's important to ensure patients are as calm and comfortable as possible during transfers, which is why this hoist includes a thermoplastic rubber-coated, anti-swing spreader bar. Providing excellent stability throughout movement, this bar has the ability to rotate a full 360°, allowing easy positioning and excellent versatility during patient transfers.

Reliable Linak Jumbo Control System

The Linak control system of this hoist helps to boost patient safety, as it includes features like an emergency stop button and an audible and visible low battery alarm. This electrical system is the gold standard for hoist controls, allowing carers to easily adjust settings to suit the particular patient being transferred.

Compact Base

To save as much space as possible, the Midi 150's leg spreading device is located within the chassis, reducing the overall footprint. This makes the hoist easier to manoeuvre into smaller spaces, allowing for easy transfers in a range of environments.

Stable Polyamide Wheels

For maximum ease of movement, the hoist sits on 100mm double wheels with polyamide support, ensuring smooth movements. It also incorporates a single brake on the rear wheels, allowing excellent stability during transfers. 

Three Hoists Available

The Alerta Powerlifter range of hoists includes three sizes to suit different environments and applications:

• Alerta Powerlifter Mini 135 Patient Lifting Hoist
  • Safe working load: 135kg
  • Lift height: 330 - 1350mm
  • Base dimensions (WxL): 530 x 1130mm

• Alerta Powerlifter Midi 150 Patient Lifting Hoist
  • Safe working load: 150kg
  • Lift height: 340 - 1470mm
  • Base dimensions (WxL): 540 x 1230mm

• Alerta Powerlifter Maxi 175 Patient Lifting Hoist
  • Safe working load: 175kg
  • Lift height: 450 - 1590mm
  • Base dimensions (WxL): 630 x 1360mm

Alerta Powerlifter Maxi 175 Patient Lifting Hoist

When transferring patients with low levels of mobility, reliable hoists and transfer aids must be used, but it can be difficult to find a reliable hoist at an affordable price. The Alerta Powerlifter Maxi 175 Patient Lifting Hoist is an excellent patient lifter for home care, hospital and care home environments, providing secure transfers at a relatively low price. Powered by the Linak control system, this easy-to-use hoist includes an anti-swing, rubber-coated spreader bar to ensure transfers are as smooth and safe for patients as possible.

Key Features

• Cost-effective hoist for home care, hospital and care home environments
• Provides a smooth and calm transfer experience for patients
• Easy-to-use with tool-free assembly and setup
• Thermoplastic rubber-coated, anti-swing spreader bar for smooth transfers
• Powered by the reliable Linak jumbo control system 
• Emergency stop button to provide peace of mind to carers
• Spreader bar features 360° rotation for versatility
• Audible and visual low battery alarms to alert carers
• Rear castors include single brake to ensure stability
• Disassembles into two parts for ease of storage and transport
• Ergonomic handle allows for easy adjustments
• Leg spread device located within the chassis to reduce footprint
• Complies with all quality and use standards for hoists
• Anti-entrapment measure to enhance safety
• SWL: 175kg

Easy Assembly and Operation

The Maxi 175 Hoist is designed to be as user-friendly as possible, as it can be assembled without the use of tools, and disassembles into two parts for ease of transport and storage. Ergonomic handles make movement simple for the carer, allowing the patient to be positioned correctly in seconds for the most efficient and safe transfers possible.

Anti-Swing Bar for Smooth Transfers

It's important to ensure patients are as calm and comfortable as possible during transfers, which is why this hoist includes a thermoplastic rubber-coated, anti-swing spreader bar. Providing excellent stability throughout movement, this bar has the ability to rotate a full 360°, allowing easy positioning and excellent versatility during patient transfers.

Reliable Linak Jumbo Control System

The Linak control system of this hoist helps to boost patient safety, as it includes features like an emergency stop button and an audible and visible low battery alarm. This electrical system is the gold standard for hoist controls, allowing carers to easily adjust settings to suit the particular patient being transferred.

Compact Base

To save as much space as possible, the Maxi 175's leg spreading device is located within the chassis, reducing the overall footprint. This makes the hoist easier to manoeuvre into smaller spaces, allowing for easy transfers in a range of environments.

Stable Polyamide Wheels

For maximum ease of movement, the hoist sits on 100mm double wheels with polyamide support, ensuring smooth movements. It also incorporates a single brake on the rear wheels, allowing excellent stability during transfers. 

Three Hoists Available

The Alerta Powerlifter range of hoists includes three sizes to suit different environments and applications:

• Alerta Powerlifter Mini 135 Patient Lifting Hoist
  • Safe working load: 135kg
  • Lift height: 330 - 1350mm
  • Base dimensions (WxL): 530 x 1130mm

• Alerta Powerlifter Midi 150 Patient Lifting Hoist
  • Safe working load: 150kg
  • Lift height: 340 - 1470mm
  • Base dimensions (WxL): 540 x 1230mm

• Alerta Powerlifter Maxi 175 Patient Lifting Hoist
  • Safe working load: 175kg
  • Lift height: 450 - 1590mm
  • Base dimensions (WxL): 630 x 1360mm