Pressure Relief Mattress

Serenade Seat

Details
Serenade Seat is a 43cm (17”) seat cushion designed to add extra pressure relief to the user. It is manufactured using two grades of pressure relieving foam with the top level also being cut to add extra relief.
• Dimensions: 43cm L x 43cm W x 9cm H
• Maximum user weight 25st / 160Kg

Basic Seat Cushion

Prelude Alternating Cushion 43x43x7.5cm

Infection Control

 The multi stretch PU cover is waterproof, vapour permeable and impregnated with Acti-fresh biocide to help prevent the build up of bacteria and ensure it can be easily cleaned to aid disinfection protocols

White inner substrate (underside of the cover) helps auditing procedures by making staining easy to identify

High frequency welded seams, fully enclosed zip and integral covered hoses help to reduce the risk of fluid ingress

The entire cushion cell system (excluding foam base) and cover can be completely removed and laundered up to 80°C to aid decontamination protocols

Pump unit can be easily wiped clean to ensure there is no harbouring of pathogens

Pressure Area Care

Alternating pressure mode provides optimum pressure relief and comfort for patients who are considered to be at Medium Risk of developing pressure ulcers

Can be used in conjunction with Prelude Mattress Overlay System to provide the same level of pressure area care whilst sat out of bed

Ease of Use

Simple and easy to use pump unit offers a choice of varying comfort levels

Patient readiness indicator will illuminate when the cushion has reach the appropriate pressure

Service and Maintenance

Easy access air filters help prolong the life and reliability of the pump unit

Independent cell construction means that all parts i.e. cover, cells, tubing can be replaced to save ongoing maintenance costs

• Max. Weight Limit: 25 stones / 159 kgs

• Risk Factor: Medium to High Risk

• Warranty: 2 years

• Cushion Dimensions: 43cm x 43cm x 7.5cm

• Cushion Weight: 2 kgs

• Power Unit Dimensions: 30cm x 19 cm x 9.5cm

• Power Unit Weight: 2 kgs

Electrical

• Safety Standards: IEC601/1 BS5724 Part 1
• Voltage: AC230v 50Hz
• Noise Level: NC30
• Power Input: 12w
• Fuse: T1A

Eclipse Alternating Cushion 43x43x10 (cm)

Infection Control

The multi stretch PU cover is waterproof, vapour permeable and impregnated with Acti-fresh biocide to help prevent the build up of bacteria and ensure it can be easily cleaned to aid disinfection protocols

White inner substrate (underside of the cover) helps auditing procedures by making staining easy to identify

High frequency welded seams, fully enclosed zip and integral covered hoses help to reduce the risk of fluid ingress

The entire cushion cell system (excluding foam base) and cover can be completely removed and laundered up to 80°C to aid decontamination protocols

Pump unit can be easily wiped clean to ensure there is no harbouring of pathogens

Pressure Area Care

Alternating pressure mode provides optimum pressure relief and comfort for patients who are considered to be at High Risk of developing pressure ulcers

Can be used in conjunction with Eclipse Mattress Overlay System to provide the same level of pressure area care whilst sat out of bed

Ease of Use

Simple and easy to use pump unit offers an adjustable comfort control from Soft to Firm

Patient readiness indicator will illuminate when the cushion has reach the appropriate pressure

Service and Maintenance

Audible and visual alarms alert the career in dual format if the system encounters a power failure or low pressure problem

Easy access air filters help prolong the life and reliability of the pump unit

Independent cell construction means that all parts i.e. cover, cells, tubing can be replaced to save ongoing maintenance costs

• Max. Weight Limit: 25 stones / 159 kgs

• Risk Factor: High Risk

• Warranty: 2 years

• Cushion Dimensions: 43cm x 43cm x 10cm

• Cushion Weight: 2 kgs

• Power Unit Dimensions: 30cm x 19 cm x11cm

• Power Unit Weight: 2 kgs

Electrical

1. Safety Standards: IEC601/1 BS5724 Part 1
2. Voltage: AC230v 50Hz
3. Noise Level: NC30
4. Power Input: 12w
5. Fuse: T1A

Apollo Dynamic Mattress System

Developed for high-risk users, this dual therapy system offers both alternating and static therapies for effective pressure relief. The combination of therapies gives the Apollo optimum flexibility to meet diverse patient requirements within ITU, ward or community care environments.

• 2 cell alternating dynamic pressure therapy, full mattress replacement system
• Designed for High risk (as defined by EPUAP and NICE guidelines)
• Automatic adjustment - determined by patient weight and positioning that is constantly being assessed
• Figure 8 cell construction with sub cell remaining inflated to reduce risk of patient bottoming out and offering reliability of a supportive surface in the event of power fail
• Static head cells for patient comfort
• Easy to use digital control system incorporating Alternating and static modes – static mode defaults back to alternating
• Easy to use transport function – mattress remains inflated for up to 12 hours
• Visible and audible alarm including cycle fault, power failure and low pressure
• Comfort control setting to allow optimum comfort for individual patients without compromising on performance
• Automatic function lockout
• Cable Management - reducing risk of trip hazards
• Robust and reliable easy to connect and disconnect tube set
• Multi stretch, waterproof/vapour-permeable top cover
• Concealed zips and welded seams
• Rapid deflate CPR
• Dual sided attachment straps and anti slip base to reduce risk of movement
• Easy to maintain modular construction

• Dimensions: 200 x 88 x 20 cm
• Max User Weight :190kg (30st)
• Warranty: 2 Years

Serenade Seat

Details
Serenade Seat is a 43cm (17”) seat cushion designed to add extra pressure relief to the user. It is manufactured using two grades of pressure relieving foam with the top level also being cut to add extra relief.
• Dimensions: 43cm L x 43cm W x 9cm H
• Maximum user weight 25st / 160Kg

Sidhil Acclaim VE Foam Mattress

Details
The Sidhil Acclaim VE is a non-turning, high-risk support mattress, manufactured using castellated visco elastic foam, which has been engineered to work specifically with electric profiling beds and is for use with high risk patients.

The visco elastic top layer has been ergonomically designed to give optimum pressure relief and benefits from a zoned surface layer. The 'U' foam construction of the side walls and base has been engineered to provide both added stability and strength, and to allow the mattress to contour with a profiling mattress platform.

The mattress has a maximum user weight of 220kg (35st).

The cover is made from a two-way stretch vapour-permeable PU coated fabric with premium stitched seams. The cover has also been designed with a 'Waterfall Flap' and a more user friendly covered zip.

Key Features

Premium stitch seams
Waterproof/vapour-permeable cover with waterfall flap and user friendly zip
Maximum user weight of 220kg (35st)
Base of cover manufactured from heavy duty nylon
For use with high risk patients
FR Crib 5
Suitable for Care Home/Hospice
Suitable for Community Equipment Store
Suitable for Hospitals
Height: 15.5cm

Width: 86.5cm

Length: 195.5cm

Weight: 15kg