Days Roll-Up Ramp

Foldable or not, most wheelchair ramps are rather bulky and difficult to take with you wherever you might need assistance. That is why the Days Roll-Up Ramp features a compact design that allows it to be rolled up for transport and easily set back up in a matter of seconds. With its durable, non-slip surface and side rails that act as a bumper guide, this ramp is not only extremely practical, but safe as well.

Features and Benefits of the Roll-Up Ramp
Lightweight and compact design for easy portability
Can easily be rolled up for transport
Covered with non-slip surface for added safety
Equipped with side rails for extra security
Holds a maximum load of 273kg (43 stone)
Available in two lengths, Short and Long
Highly Practical and Easily Portable
The Roll-Up Ramp is designed to be easily portable and convenient to use. Its compact structure allows it to be rolled up for transport and just as easily set up in a matter of seconds.

Specifications of the Roll-Up Ramp 

The Roll-Up Ramp is available in two different lengths, Short and Long. Please see the table below for additional information. 

Days Fixed Length Broad Ramp

Days Fixed Length Broad Ramp
The Days Fixed Length Broad Ramp is a unique ramp, designed to take the whole of the scooter or wheelchair. It is especially suitable for three-wheeled scooters, which cannot be accommodated on channel ramps, while wheelchair attendants may find it easier to push users up and down this ramp, as they can simply walk behind the chair.

Features and Benefits of the Broad Ramp
Designed to take the whole of the scooter or wheelchair
Especially suitable for three-wheeled scooters
Angled lip with ribbed rubber underneath for extra grip
Comes with pre-drilled holes should permanent fixing be required
Side parapets for added security
Covered in gritted coating for additional safety
Holds a maximum load of 400kg (63 stone)
Available in two different lengths, Short and Long
Convenient Broad Design
The Days Fixed Length Broad Ramp is designed with one broad platform, making it especially suitable for three-wheeled scooters, which can't be accommodated on channel ramps. Moreover, wheelchair attendants might find it easier to push users up and down this ramp, as they can easily walk behind the wheelchair.

Extra Safe
The Broad Ramp features an angled lip with ribbed rubber underneath for extra grip on the landing surface. Furthermore, it is equipped with side parapets that help to prevent the wheelchair from coming off the ramp, while the platform is coated with grit for better grip and safety.

Specifications of the Fixed Length Broad Ramp
The Days Fixed Length Broad Ramp is available in two different lengths. Please see the table below for more information.

Short Long
Length (cm) 61cm 100cm
Internal Width (cm) 70cm 70cm
Maximum Width (cm) 76.6cm 76.6cm
Weight (kg) 7.8kg 10.7kg
Maximum Load (kg)

Connect Platform for Aerolight Wheelchair Ramps

Connect Platform for Aerolight Wheelchair Ramps
When temporary ramps need to be installed, there may not be sufficient steps or ridges over which the lip of the ramp can be placed for secure use. Even in cases where the ramp can be placed safely, the steepness of the ramp to the higher level may be too severe. In either scenario, using a Connect Platform for Aerolight Wheelchair Ramps can improve functionality of the Aerolight ramp and increase safety by allowing for a gradual height increase.

Metal Connect Platform
The metal Connect Platform allows a ramp to be positioned at ground level, leading up to the platform. This means that a user with reduced mobility can access the platform with ease, and the ramp can be used by both walking pedestrians and individuals using a wheelchair, scooter, or rollator.

The Connect Platform increases the benefit of the ramp by providing a solid textured surface, and can be used both indoors and outside. In wet weather conditions, however, caution should always be taken, even though the textured surface helps to improve grip.

Great for Events
Ramps are often required at public and private events to provide increased accessibility for individuals with reduced mobility. Where seating areas are narrow, the platform can provide additional room for a wheelchair or scooter. It will also enable safer and easier access to such areas as staging, where steps may not be present.

Gradual Height Increase
The Connect Platform for Aerolight Wheelchair Ramps is an ideal choice for where a single ramp to a higher level would produce too steep a slope. The platform can create a midway point by utilising two ramps for a more progressive slope.

Dimensions of the Connect Platform
The size of this platform is 120 x 120cm. The height can be adjusted from 12.5cm to 38cm.

Please note that the ramp and handrails pictured are sold separately.

Axcess Telescopic Two Part Channel Ramps

Axcess Telescopic Two Part Channel Ramp
The Axcess Telescopic Two Part Channel Ramp is designed to be easily telescoped in and out to always provide optimum length, while its sturdy aluminium frame and spring safety lock give the user a feeling of stability and security. The ramp is available in three different sizes, allowing you to choose the size that matches your needs.

Key Features of the Telescopic Two Part Channel Ramp
Made from two nested aluminium extrusions for stability and security
Can be telescoped in and out to give optimum length
Easy to close down for storage or transport
Equipped with a spring safety lock holding the sections closed
Available in three lengths, Short, Medium and Long
Supplied as a pair of two ramps
Durable and Secure
The Two Part Channel Ramp is made from two nested aluminium extrusions that produce a strong ramp for a feeling of safety and stability. The spring safety lock holds the two sections securely closed, enabling safe and easy transportation.

Highly Adjustable
The Channel Ramp can be telescoped in and out to provide the optimum length, as well as closed down to its minimum length for easy storage and transportation. Furthermore, you can choose from three different lengths to find the one that suits your needs best.

Specifications of the Telescopic Two Part Channel Ramp
The Axcess Telescopic Two Part Channel Ramp is available in three different lengths. Please see the table below for more information.

Short

Minimum Length: 88cm
Maximum Length: 150cm
Internal Width: 18.8cm
Maximum Width: 24.5cm
Weight: 6.8kg
Maximum Load: 450kg
Medium

Minimum Length: 113cm
Maximum Length: 200cm
Internal Width: 18.8cm
Maximum Width: 24.5cm
Weight: 8.7kg
Maximum Load: 400kg
Long

Minimum Length: 163cm
Maximum Length: 300cm
Internal Width: 18.8cm
Maximum Width: 24.5cm
Weight: 12.6kg
Maximum Load: 350kg

Axcess Lightweight Telescopic Ramp

Axcess Lightweight Telescopic Ramp
The lightweight and highly portable Axcess Lightweight Portable Ramp might get the job done, yet it lacks adjustable length. The Axcess Lightweight Telescopic Ramp is just as portable, simple to attach and safe to use, while its length can be easily adjusted from 92cm to 150cm.

Key Features and Benefits of the Telescopic Ramp
Designed to be lightweight and highly portable
Equipped with two moulded plastic inserts for easy adjusting
Grit-coated working surface for maximum grip and durability
Comes with a locking device that holds the two parts together at minimum length
Supplied as a pair of two ramps
Holds a maximum load of 300kg (47 stone)
Available in two different lengths, Short and Long
Safety Comes First
The working surface of the ramp is coated in grit for maximum grip and durability, while the locking device, supplied with the ramp, holds the two parts together at their minimum length to prevent accidental opening during transportation. This makes using the Lightweight Telescopic Ramp easy and carefree.

Using the Telescopic Ramp
The Telescopic Ramp features adjustable length and is designed to be practical to use, as well as easily portable. Due to the locking device that holds the two parts together at their minimum length, transporting this ramp is even easier.

Attaching the Telescopic Ramp to wherever you need it is just as easy with the help of two moulded plastic inserts that lock on the top of a step or the back of a vehicle.

Specifications of the Axcess Lightweight Telescopic Ramp
The Axcess Lightweight Telescopic Ramp is available in two different sizes: Short and Long. Please see below for more information on these variants.

Short

Maximum Length: 150cm
Minimum Length: 92cm
Internal Width: 15cm
Maximum Width: 19cm
Weight: 4kg
Maximum Load: 300kg
Long

Maximum Length: 200cm
Minimum Length: 117cm
Internal Width: 15cm
Maximum Width: 19cm
Weight: 5.3kg
Maximum Load: 300k

Axcess Lightweight Portable Ramp

Axcess Lightweight Portable Ramp
When it comes to wheelchair ramps, you expect them to be easily portable, simple to attach and safe to use. With the two moulded plastic inserts for easy adjusting and grit-coated working surface for maximum grip, the Axcess Lightweight Portable Ramp is exactly what you've been looking for.

Key Features and Benefits of the Portable Ramp
Designed to be lightweight and highly portable
Equipped with two moulded plastic inserts for easy adjusting
Grit-coated working surface for maximum grip and durability
Supplied as a pair of two ramps
Holds a maximum load of 300kg (47 stone)
Available in two different lengths, Short and Long
Using the Portable Ramp
The ramp is designed to be lightweight and highly portable. The top of the ramp features two moulded plastic inserts that make attaching the ramp on the top of a step or the back of a vehicle quick and easy, while the working surface is coated in grip for maximum grip and durability.

Specifications of the Axcess Lightweight Portable Ramp
The Axcess Lightweight Portable Ramp is available in two different sizes; please see below for more information.

Length (Short Model): 100cm
Length (Long Model): 150cm
Internal Width: 15cm
Total Width: 18cm
Weight (Short Model): 2.5kg
Weight (Long Model): 3.8kg
Maximum Load: 300kg

Aluminium Access Ramp

Aluminium Access Ramp
The Aluminium Access Ramp is an ideal and simple way to get wheelchairs and scooters up steps. To ensure the Aluminium Access Ramp stays in place, it is supplied with a fixing pin which attaches the ramp to the step.

This ramp is available in two lengths. Select your desired length using the drop-down menu at the top of the page.

Who Can Use the Aluminium Access Ramp?
The Aluminium Access Ramp is ideal for anyone looking for increased access for their wheelchair or scooter. It is perfect for the home environment and is a cost effective way to conquer steps and help you be more independent.

Aluminium Access Ramp Specifications
The Aluminium Access Ramp is available in two lengths

Length: 45.5cm (18"), or 61cm (24")
Width: 76.3cm (30")
Maximum load weight: 228kg (36st)

Aerolight-Lifestyle Premium Multi-Folding Wheelchair Ramp

VAT Relief
Aerolight-Lifestyle Premium Multi-Folding Wheelchair Ramp
While ramps may at first appear costly to install or cumbersome to transport, the Aerolight range of ramps have been designed to offer a practical, lightweight approach to increasing access to buildings and public spaces. The Aerolight-Lifestyle Premium Multi-Folding Wheelchair Ramp is suitable for virtually any wheeled mobility aid, improving access to vehicles and buildings with safer use and lightweight transportation.

Suitable for Most Individuals and Businesses
The Aerolight-Lifestyle Multi-Folding Wheelchair Ramp has been designed to support virtually all types of wheelchairs, rollators, and scooters, including two- to six-wheel models. This versatility will be particularly useful for care environments, local businesses, and residential homes where any number of individuals with reduced mobility may be required improved access, both in and out of buildings and while using transportation.

As the special tapered lip shape of the ramp has been designed to fit into narrower doorways, it can be used with a wider range of public and private buildings. It can accommodate openings as narrow as 28.1" (71.4cm), and can also facilitate entry from an angle.

Dependable Design
Not only has the wheelchair ramp been designed for use in a wide range of places and situations, but it has also been created to provide optimal dependability. With a full-width anti-slip surface, it can enable a sturdy and stable full-width-grip platform that both walking users and individuals with reduced mobility can use to ascend steps or kerbs.

The Aerolight-Lifestyle also offers an impressive strength-to-weight ratio. The maximum weight capacity will depend on the size of ramp used; there are four lengths of ramp available, with the following corresponding weight and capacity:

Length (foot/cm) Capacity (kg/stone) Ramp Weight - Each Half (kg/stone)
6' (180cm) 350kg (55 stone) 7.4kg (16lb)
7' (210cm) 300kg (47 stone) 8.3kg (18lb)
8' (240cm) 250kg (39 stone) 9.3kg (21lb)
9' (270cm) 250kg (39 stone) 10.3kg (23lb)
The required ramp length can be selected from the drop-down menu at the top of the page.

Increased Safety
To enhance safety for individuals, the Aerolight-Lifestyle Wheelchair Ramp has been designed to be more user friendly in a wide range of situations. The ramps are lightweight, with each single ramp ranging from 7.4kg to 10.3kg depending on ramp length, which means that they can be manoeuvred with ease into position whenever required. The fact that the ramp comprises two individual ramps ensures that it can be transported and manoeuvred with greater ease.

The ramp also includes a reflective lip feature to improve safety in situations with lower light. This will be particularly important for when individuals with already-reduced mobility are using the ramp, helping to guide them in the right direction while reducing the risk of tripping over the edges of the ramp. The addition of rigid handles and safety hinges with pinch protection further enhance the user-friendly design of the ramp.

Folding for Transport and Storage
Unlike many other wheelchair ramps, the Aerolight-Lifestyle can be folded, with each of the two ramp lengths folding in half. This provides a compact storage solution, and the handles allow each half to be transported around a building or to a new location with ease.

Technical Specifications
Lip width: 69.6cm (27.4")
Ramp width (excluding handles): 74cm (29")

Aerolight-Classic Wheelchair Ramp

VAT Relief
Aerolight-Classic Wheelchair Ramp
While ramps may at first appear costly to install or cumbersome to transport, the Aerolight range of ramps have been designed to offer a practical, lightweight approach to increasing access to buildings and public spaces. The Aerolight-Classic Wheelchair Ramp is suitable for virtually any wheeled mobility aid, and can be purchased in a choice of sizes to best suit individual requirements.

Suitable for Most Individuals and Businesses
The Aerolight-Classic Ramp has been designed to support virtually all types of wheelchairs, rollators, and scooters, including two- to six-wheel models. This versatility will be particularly useful for care homes, local businesses, and transport vehicles where any number of individuals with reduced mobility may be required to access the area while relying on a wheeled mobility aid.

As the special tapered lip shape of the ramp has been designed to fit into narrower doorways, it can be used with a wider range of public and private buildings. It can accommodate openings as narrow as 28.1" (71.4cm), and can also facilitate entry from an angle.

Dependable Design
Not only has the wheelchair ramp been designed for use in a wide range of places and situations, but it has also been created to provide optimal dependability. It can be deployed either way around as required, and can then enable a sturdy and stable full-width-grip platform that both walking users and individuals with reduced mobility can use to ascend steps or kerbs.

The Aerolight-Classic also offers an impressive strength-to-weight ratio. The maximum weight capacity will depend on the size of ramp used; there are four lengths of ramp available, with the following corresponding weight and capacity:

Length (feet/cm) Capacity (kg/stone) Ramp Weight (kg/stone)
2' (60cm) 400kg (63 stone) 4.2kg (9lb)
3' (90cm) 350kg (55 stone) 5.4kg (12lb)
4' (120cm) 350kg (55 stone) 6.8kg (15lb)
5' (150cm) 350kg (55 stone) 8.2kg (18lb)
The required ramp length can be selected from the drop-down menu at the top of the page.

Increased Safety
To enhance safety for individuals, the Aerolight-Classic Wheelchair Ramp has been designed to be more user friendly in a wide range of situations. The ramps are lightweight, ranging from 4.2kg to 8.2kg depending on ramp length, which means that they can be manoeuvred with ease into position whenever required.

The ramp also includes a reflective lip feature to improve safety in situations with lower light. This will be particularly important for when individuals with already-reduced mobility are using the ramp, helping to guide them in the right direction while reducing the risk of tripping over the edges of the ramp.

Technical Specifications
Lip width: 71.4cm (28.1")
Ramp width (excluding handles): 76cm (30")

Doorline-Neatslope Self-Adhesive Compact Ramp

VAT Relief
Doorline-Neatslope Self-Adhesive Compact Ramp
For individuals with reduced mobility, whether using a wheeled mobility aid or simply finding steps difficult to climb, a ramp can make all the difference. However, the distance between one level and the next may not be so sufficient as to warrant the installation of a more sizeable ramp.

The Doorline-Neatslope Self-Adhesive Compact Ramp has been designed with these shallower height drops in mind. It is ideal for situating in front of a door to ease the transition from one room to the next, with the ability to affix it in place with the self-adhesive backing, and it can even be trimmed if none of the three available sizes comfortably fit your doorway.

Versatile Use
While a shallow change in height between two rooms may not seem like much of a problem to most people, people with reduced mobility may find this difficult or even impossible if they use a wheelchair or scooter. With the Doorline-Neatslope Self-Adhesive Compact Ramp, the low slope provides a flat surface that will improve the accessibility for most individuals.

The ramp is great for home use, but it is also a practical solution for reducing level drops in care homes, public buildings, and anywhere where crossing from one room to the next poses a health risk. It will both improve accessibility for individuals with reduced mobility and decrease the risk of injury to individuals who may trip or fall as a result of not noticing the sudden drop in height.

Trimmable Design
The Neatslope Self-Adhesive Compact Ramp is available in a choice of three sizes (see below), and it has also been designed for easy trimming for an even better fit. This way, it can achieve a snug fit in the doorway both for easier access and safer use.

Self-Adhesive Backing
The Doorline-Neatslope Self-Adhesive Compact Ramp has been designed to secure simply yet effectively into place. It features self-adhesive backing on the underside of the ramp, which can quickly be peeled back to reveal the sticky surface. This can then help to affix the ramp into place, increasing safety by reducing the risk of the ramp straying.

Available Sizes
The Doorline-Neatslope Self-Adhesive Compact Ramp has a maximum capacity of 300kg (47 stone), and a width of 90cm (25.4 inches). The following lengths are available:

Length (cm/inches) Height (cm/inches) Weight (kg/lb)
6cm (2.4 inches) 0.6cm (0.25") 0.3kg (0.7lb)
10cm (3.9 inches) 1cm (0.4") 0.75kg (1.7lb)
15cm (5.9 inches) 1.6cm (0.6") 1kg (2.2lb)
Please select your required size from the drop-down menu at the top of the page.

Adjustable Threshold Ramp

Adjustable Threshold Ramp
The Adjustable Threshold Ramp allows the user to assemble their own, custom-made ramp. It is supplied in sections that can easily be fitted together to provide the exact height needed in a certain situation.

Key Features and Benefits of the Adjustable Threshold Ramp
Supplied in sections for extreme versatility
Easy to assemble and adjust to the user's needs
Each additional section provides a 25mm rise
Holds a maximum load of 318kg (50 stone)
Available in two different lengths
Highly Adjustable and Versatile
The Threshold Ramp is supplied in sections that may be fitted together to achieve the exact height you require in a certain situation. Each section provides an additional 25mm rise, enabling you to assemble the ramp to your liking.

How Does the Adjustable Threshold Ramp Work?
To use the Threshold Ramp simply slide the sections together to achieve the height required, then slide the lip onto the last section. The sections may be fixed into place via the two holes in the lip.

Specifications of the Adjustable Threshold Ramp
The Adjustable Threshold Ramp is available in two different lengths. Please see the table below for additional information.

Short Long
Maximum Length 304mm 432mm
Minimum Length 144mm 144mm
Maximum Height 51mm 76mm
Width 864mm 864mm
Weight 2.5kg 3.6kg
Maximum Load 318kg 318kg

Advantage Series Suitcase Ramp

Advantage Series Suitcase Ramp
The Advantage Series Suitcase Ramp has a single fold design that offers a simple and convenient solution for wheelchairs and scooters to access steps, vehicles and raised landings with ease. One of its many unique features is that it can be separated into two pieces, which makes it even easier to use, carry and store.

Features of the Advantage Series Suitcase Ramp
Single-fold design for easy and simple access to raised surfaces
Made from ultra-strong aluminium for durability and reliability
Lightweight and highly portable
Can easily be disassembled for easy transport and storage
Equipped with a self-adjusting bottom transition plate
Holds a maximum of 363kg (57 stone)
Available in four different lengths
Who Can Benefit from the Suitcase Ramp?
The Advantage Series Suitcase Ramp provides a convenient solution for wheelchair and scooter users to access steps, vehicles and raised landings with ease. It can be quickly disassembled, making it convenient for occasional user only, as storing it presents no hassle.

Smooth Transition
This ultra-strong aluminium ramp also features a high-quality slip-resistant tape with yellow safety strips, as well as a self-adjusting bottom transition plate for easy conversion from the ram to the ground. This makes it not only incredibly resilient and reliable, but comfortable as well.

Specifications of the Advantage Series Suitcase Ramp
The Advantage Series Suitcase Ramp is available in four different lengths. Please see the table below for more information.

Minimum Length Internal Width Maximum Width Weight Maximum Load
91.5cm 73.6cm 76.5cm 3.6kg 363kg
122cm 73.6cm 76.5cm 4.5kg 363kg
152.5cm 73.6cm 76.5cm 5.9kg 363kg
183cm 73.6cm 76.5cm 6.8kg 363kg

Advantage Series TriFold Ramp

Advantage Series TriFold Ramp
The Advantage Series TriFold Ramp has a unique three-fold design, and provides easy access to steps, vehicles and raised landings. Equipped with a slip-resistant surface with yellow safety strips, as well as a self-adjusting bottom transition plate for smoother transitions, this sturdy aluminium ramp is not only secure, but easy to use as well.

Key Features of the TriFold Ramp
Provides easy access to steps, vehicles and raised landings
Made from welded aircraft-grade aluminium for premium quality
Can be used and carried as a set or in sections
Each section has its own carrying handle
Durable hinge with interlocking brackets for reduced pinch points
Equipped with a slip-resistant surface with yellow safety strips
Comes with a self-adjusting bottom transition plate
Holds a maximum load of 318kg (50 stone)
Available in four different sizes
Why Is It Called a TriFold Ramp?
This ramp features a unique three-fold design, and can be used and carried as a set or it can be quickly separated into two lightweight sections. Each section comes with its own carrying handle, making the TriFold Ramp highly practical and versatile.

Extra Safe and Comfortable
The durable hinge on the Advantage Series TriFold Ramp features interlocking brackets, providing smoother operation and reduced pinch points. This portable ramp also comes with a high quality slip-resistant surface with yellow safety strips and a self-adjusting bottom transition plate for easy transitioning from the ramp to the ground.

Specifications of the Advantage Series TriFold Ramp
There are five different length options to choose for the Advantage Series TriFold Ramp. Please see the table below for additional information.

Minimum Length Maximum Length Internal Width Maximum Width Weight Max. Load
102cm 193cm 73.7cm 75.6cm 13.6kg 318kg
117cm 213cm 73.7cm 75.6cm 15.9kg 318kg
143cm 244cm 73.7cm 75.6cm 20.5kg 318kg
170cm 305cm 73.7cm 75.6cm 25kg 318kg

Aerolight Ramp Locating Peg Kit for Wheelchair Ramps

Aerolight Ramp Locating Peg Kit for Wheelchair Ramps
When a ramp is positioned over steps or leading up to a higher level, it provides a practical solution to improving accessibility for individuals with reduced mobility. However, it is important to take every measure to ensure that the ramp has been securely positioned to reduce the risk of it slipping and causing injury to individuals. With the Aerolight Ramp Locating Peg Kit for Wheelchair Ramps, an Aerolight ramp can be securely located to an upper step or vehicle, minimising the possibility of it drifting or slipping away.

How Does It Work?
The Aerolight Ramp Locating Peg Kit can be fitted onto any new Aerolight ramp. The locating studs can be drilled into the underside of the lip of the ramp, and this can then be positioned on the upper step or vehicle. By affixing the kit to the ramp, you can rest assured that measures have been taken to increase the safety, and in turn the practicality, or the versatile Aerolight ramp.

Included with the Kit
The Ramp Locating Peg Kit includes two studs, drill bit, and fixings. Simply attach the kit to the lip of the ramp for improved location.

Aerolight-Broadfold Premium Folding Wheelchair Ramp

VAT Relief
Aerolight-Broadfold Premium Folding Wheelchair Ramp
While ramps may at first appear costly to install or cumbersome to transport, the Aerolight range of ramps have been designed to offer a practical, lightweight approach to increasing access to buildings and public spaces. The Aerolight-Broadfold Premium Folding Wheelchair Ramp is suitable for virtually any wheeled mobility aid, and features rigid handles for easy loading in and out of vehicles.

Ideal for Buildings and Vehicles
The Aerolight-Broadfold Folding Wheelchair Ramp has been designed to support virtually all types of wheelchairs, rollators, and scooters, including two- to six-wheel models. This versatility will be particularly useful for care environments, local businesses, and residential homes where any number of individuals with reduced mobility may be required to access the area while relying on a wheeled mobility aid. As it folds in half, it will also be ideal for assisting individuals into a vehicle and then transporting compactly.

As the special tapered lip shape of the ramp has been designed to fit into narrower doorways, it can be used with a wider range of public and private buildings. It can also facilitate entry from an angle.

Dependable Design
Not only has the wheelchair ramp been designed for use in a wide range of places and situations, but it has also been created to provide optimal dependability. With a full-width anti-slip surface, it can enable a sturdy and stable full-width-grip platform that both walking users and individuals with reduced mobility can use to ascend steps or access vehicles.

The Aerolight-Broadfold also offers an impressive strength-to-weight ratio. The maximum weight capacity will depend on the size of ramp used; there are three lengths of ramp available, with the following corresponding weight and capacity:

Length (foot/cm) Capacity (kg/stone) Ramp Weight (kg/stone)
5' (150cm) 350kg (55 stone) 11.8kg (26lb)
6' (180cm) 350kg (55 stone) 13.1kg (29lb)
7' (210cm) 300kg (47 stone) 14.4kg (32lb)
The required ramp length can be selected from the drop-down menu at the top of the page.

Increased Safety
To enhance safety for individuals, the Aerolight-Broadfold Wheelchair Ramp has been designed to be more user friendly in a wide range of situations. The ramp is lightweight, ranging from 11.8kg to 14.4kg depending on ramp length, which means that it can be manoeuvred with ease into position whenever required.

The ramp also includes a contrasting colour edge strip and a reflective lip feature to improve safety in situations with lower light. This will be particularly important for when individuals with already-reduced mobility are using the ramp, helping to guide them in the right direction while reducing the risk of tripping over the edges of the ramp.

Folding for Transport and Storage
Unlike many other wheelchair ramps, the Aerolight-Broadfold can be folded in half. This clips together for convenient and compact storage, and the handles allow it to be transported around a building or to a new location with ease.

Technical Specifications
Lip Width: 71.4cm (28.1")
Ramp Width (Excluding Handles): 76cm (30")

Utilityramp Portable Mobility and Industrial Ramp

VAT Relief
Utilityramp Portable Mobility and Industrial Ramp
There are many types of ramps, and some are more suited to some jobs than others. The Utilityramp Portable Mobility and Industrial Ramp has been designed to cater for a diverse range of access requirements, ideal for both mobility and industrial needs.

The ramp features unique anti-slip Gripdeck technology for improved safety, and it is easy to transport between locations for deployment wherever and whenever it is required. Some lengths are also available with wheels, ensuring that the ramp can be pushed to the required location with minimal effort.

Warehousing and The robust Utilityramp ramp is an excellent industrial choice, allowing warehouse operatives to transport goods with ease. It can accommodate weight of up to 400kg, allowing trolleys and carts to be wheeled around without being hindered by steps, stairs, or raised levels.

The ramp is also great for storing in a goods or postal van where large items are being delivered. While many locations have good accessibility, not every drop-off point or delivery address will have step-free access; by storing the Utilityramp Portable Mobility and Industrial Ramp in the van, it can be deployed at short notice.

Improved Wheelchair Access
With a portable design that can be positioned and removed without difficulty, the Utilityramp Portable Ramp is a great option for increasing accessibility for wheelchairs, scooters, and other wheeled mobility aids. It can be placed over steps or up a raised step leading up to a doorway threshold. As the ramp can withstand wet weather, it can be left outside by the door to ensure it can be used at a moment's notice, whether at home, in a care environment, or in a public place.

Anti-Slip Gripdeck Surface
The surface of the Utilityramp is made from unique Gripdeck technology. The multi-directional grip surface improves safer use outdoors, and the weather-resistant nature of the grip increases both the safety and the longevity of the ramp.

This means that, even if the weather is wet and unpredictable, the ramp can be installed outside.

Wheeled Ramps
Some Utilityramps feature attached wheels. They can be pushed down to wheel the ramp into place, reducing the risk of tiredness or injury when transporting it any great distance. The wheels can then be flipped up so that the ramp can be placed where it is required, concluding a seamless transition from transportation to deployment.

Sizing Information
The Utilityramp Portable Mobility and Industrial Ramp has a width of 76cm (30 inches), and is available in a range of sizes. Ramps are provided either with or without wheels, depending on the model, with the following sizes available:

Ramps without Wheels
Length (cm/foot) Capacity (kg/stone) Weight (kg/lb)
90cm (3') 400kg (63 stone) 9kg (20lb)
120cm (4') 400kg (63 stone) 12.5kg (28lb)
Ramps with Wheels
Length (cm/foot) Capacity (kg/stone) Weight (kg/lb)
150cm (5') 400kg (63 stone) 15.5kg (34lb)
180cm (6') 400kg (63 stone) 19kg (42lb)
210cm (7') 350kg (55 stone) 22.5kg (50lb)
240cm (8') 300kg (47 stone) 25.5kg (56lb)
Please select your required size from the drop-down menu at the top of the page.

Please note that the image shows the Utilityramp Portable Mobility and Industrial Ramp with wheels; wheels are provided with every model excluding ramps with a length of either 90cm (3') or 120cm (4').

Ultralight-Rigid Fixed-Length Channel Wheelchair Ramps (Pair of Ramps)

VAT Relief
Ultralight-Rigid Fixed-Length Channel Wheelchair Ramps (Pair of Ramps)
Whether outside a home or in a public place, kerbs and steps can pose a great problem for people with reduced mobility. For anybody who frequently uses a wheelchair or other wheeled mobility aid, the problem of ascending kerbs and steps can hinder their ability to get around with ease, and often there is no ramp or accessible alternative for them to use instead.

The Ultralight-Rigid Fixed-Length Channel Wheelchair Ramps (Pair of Ramps) are lightweight and easy to use for instantly improved access up kerbs or single steps. They are made from anodised aluminium to provide reliable accessibility for climbing a kerb or step when in a wheelchair, regardless of where and when it is required.

Ideal for Care Environments
Care homes, hospitals, and medical environments will often have residents and patients in their care who require the use of a wheelchair or scooter. Any kerbs or steps outside of the building will significantly reduce access, but installing a fixed ramp would be expensive, messy, and disruptive. With the Ultralight-Rigid Fixed-Length Wheelchair Ramps, access can be improved as and when required, at a fraction of the cost of a permanent installation.

By using Ultralight-Rigid ramps, they can also be moved to a different part of the building. For example, a resident may like to enjoy the benefits of a back garden, or they may need to access a particular part of the home that can only be accessed down a step that has previously proven to be too difficult to navigate without a ramp. The Channel Wheelchair Ramps can be relocated wherever they are required with ease.

Great for Individual Users
While many public places are increasing accessibility for people with reduced mobility, not everywhere readily accommodates access for wheelchairs and scooters. As the Ultralight-Rigid Channel Wheelchair Ramps are lightweight and compact, they can be stored in the boot of a car for instant deployment when arriving at a location without step-free access.

Easy to Store
When the ramps are not required, they can be stored away with ease due to their compact size. As they are lightweight and include handles, they can be carried between locations, and to and from storage, to ensure they can be used at a moment's notice whenever they are required.

Technical Specifications
Length: 55cm (1' 10")
Width (internal channel): 21cm (8 inches)
Capacity per pair: 400kg (63 stone)
Stored dimensions (LxWxD): 55 x 24.5 x 7cm (22 x 10 x 3 inches)

Ultralight-Folding Threshold Wheelchair Ramps (Pair of Ramps)

VAT Relief
Ultralight-Folding Threshold Wheelchair Ramps (Pair of Ramps)
Whether for access to a building or outside in a public place, kerbs, steps, and raised thresholds can pose a great problem for people with reduced mobility. For anybody who frequently uses a wheelchair or other wheeled mobility aid, the problem of ascending kerbs and steps can hinder their ability to get around with ease, and doors are often impossible to access due to raised thresholds.

The Ultralight-Folding Threshold Wheelchair Ramps (Pair of Ramps) are lightweight and easy to use for instantly improved access up kerbs and steps, as well as for bridging door thresholds. The ramps are made from anodised aluminium to provide reliable accessibility for climbing steps or entering through a door when in a wheelchair, regardless of where and when it is required.

Ideal for Care Environments
Care homes, hospitals, and medical environments will often have residents and patients in their care who require the use of a wheelchair or scooter. Any kerbs or steps outside of the building will significantly reduce access, but installing a fixed ramp would be expensive, messy, and disruptive. With the Ultralight-Folding Wheelchair Ramps, access can be improved as and when required, at a fraction of the cost of a permanent installation.

By using Ultralight-Folding ramps, they can also be moved to a different part of the building. For example, a resident may like to enjoy the benefits of a back garden, or they may need to access a particular part of the home that can only be accessed down a step that has previously proven to be too difficult to navigate without a ramp. The Threshold Wheelchair Ramps can be relocated wherever they are required with ease.

Great for Individual Users
While many public places are increasing accessibility for people with reduced mobility, not everywhere readily accommodates access for wheelchairs and scooters. As the Ultralight-Folding Wheelchair Ramps are lightweight and compact, they can be folded away in the boot of a car for instant deployment when arriving at a location without step-free access.

Folds for Storage
When the ramps are not required, they can be folded through the use of ultra-strong steel hinges, and then stored away with ease due to their compact size. As they are lightweight in design and feature handles on each ramp, they can be carried between locations, and to and from storage, to ensure they can be used at a moment's notice whenever they are required.

Sizing Information
To cater to as many different needs as possible, the Ultralight-Folding Threshold Wheelchair Ramps (Pair of Ramps) are provided in a choice of sizes. Each ramp features a width of 21cm (8 inches), with the following lenghts and weight information:

Length Capacity per Pair Weight per Ramp Stored Dimensions
110cm (3' 7") 300kg (47 stone) 3.6kg (8lb) 55 x 24.5 x 13cm
150cm (4' 11") 300kg (47 stone) 4.6kg (11lb) 77 x 24.5 x 13cm
200cm (6' 7") 250kg (39 stone) 6kg (14lb) 102 x 24.5 x 13cm
Your required size can be selected with the drop-down menu at the top of the page.

Ultralight-Combi Adjustable Folding Threshold Wheelchair Ramps (Pair of Ramps)

VAT Relief
Ultralight-Combi Adjustable Folding Threshold Wheelchair Ramps (Pair of Ramps)
The ultimate in channel ramps, the Ultralight-Combi Adjustable Folding Threshold Wheelchair Ramps (Pair of Ramps) are great for kerbs, steps, thresholds, and vehicle access. They can be adjusted in length, and are suitable for folding both to bridge thresholds and improve storage. Whether required for individual use or for catering to unique requirements for residents in a care home, the Ultralight-Combi is sure to meet your needs.

Adjustable Lengths
These ramps are designed for optimal length adjustability. They are available in a choice of sizes (see below), and each can be adjusted between maximum and minimum lengths. They can also be used when partly extended, ensuring that they can be used for steps, kerbs, and vehicle access and and when required.

Ideal for Vehicle Access
The Ultralight-Telescopic ramps have been designed to meet the needs of vehicle access, allowing ease of entry for wheelchairs and scooters in the back of cars. This is ideal for when accessing vehicles, providing essential ease of access for motorised mobility aids that cannot be folded down.

Bridging Thresholds
For doorways with raised thresholds, a folding ramp is required. This allows the user to access the doorway up the ramp, and then enter the room down the other half of the ramp. By bridging the threshold with the folding mechanism, the Ultralight-Combi provides maximum improved accessibility.

Great for Cross Slopes
The two ramps can be used at different lengths from one another. This makes them fantastic for cross slopes, where different ramp lengths may be required for sufficient access.

Safety Mechanism
Each ramp features a silent telescopic mechanism with neat safety clip, which prevents the ramp from opening when stored. This increased safety is particularly important for use in care homes, where residents may be vulnerable or fragile.

Sizing Information
The Ultralight-Combi is available in the following four sizes:

Size 1 (PC21-3)
Maximum length: 207cm (6' 9")
Telescopic section: 132cm (52")
Hinged section: 75cm (30")
Internal channel width: 19cm (8")
Capacity per pair: 300kg (47 stone)
Weight per half: 6.5kg (14lb)
Stored dimensions (LxWxD): 76 x 24.5 x 13cm
Size 2 (PC28-3)
Maximum length: 276cm (9' 1")
Telescopic section: 176cm (69")
Hinged section: 100cm (39")
Internal channel width: 19cm (8")
Capacity per pair: 250kg (39 stone)
Weight per half: 8.4kg (19lb)
Stored dimensions (LxWxD): 102 x 24.5 x 13cm
Size 3 (PCW21-3)
Maximum length: 210cm (6' 11")
Telescopic section: 135cm (53")
Hinged section: 75cm (30")
Internal channel width: 25cm (10")
Capacity per pair: 300kg (47 stone)
Weight per half: 8kg (18lb)
Stored dimensions (LxWxD): 78 x 30.5 x 13cm
Size 4 (PCW28-3)
Maximum length: 300cm (9' 10")
Telescopic section: 194cm (76")
Hinged section: 106cm (42")
Internal channel width: 25cm (10")
Capacity per pair: 250kg (39 stone)
Weight per half: 11.4kg (23lb)
Stored dimensions (LxWxD): 108 x 30.5 x 13cm
Please select your required size from the drop-down menu at the top of the page.

Permaramp-Original Semi-Permanent Wheelchair Ramp

VAT Relief
Permaramp-Original Semi-Permanent Wheelchair Ramp
In situations where a ramp is required for improved ease of access, but where installing a permanent ramp would prove to be costly and disruptive, a semi-permanent ramp is an ideal solution. The Permaramp-Original Semi-Permanent Wheelchair Ramp can be fixed into place when required, and easily removed for relocation when needed elsewhere.

With a unique Gripdeck surface for improved grip and sustained use outdoors, it is suited to a wide range of situations. It offers an exceptional weight capacity of up to 400kg depending on ramp size, and is well suited for wheelchairs, scooters, and sports wheelchairs.

Versatile Use
The Permaramp-Original Semi-Permanent Wheelchair Ramp has been designed to offer great versatility. It can be used both indoors and outside as the surface has been manufactured for sustainable use. It can also be placed on virtually any floor surface, enhancing accessibility whether it is required at home, in a care environment, or in a public place.

With a weight capacity of between 300kg to 400kg depending on ramp length, it can accommodate virtually any wheeled mobility aid. It is particularly suited to wheelchairs, scooters, and sports wheelchairs.

Unique Gripdeck Surface
The surface of the Permaramp-Original is made from extremely durable and unique Gripdeck technology. The multi-directional grip surface improves safer use outdoors, and the weather-resistant nature of the grip increases both the safety and the longevity of the ramp.

This means that, even if the weather is wet and unpredictable, the ramp can be installed outside. This makes it a ideal ramp for use in a garden, in a public space, and even as a temporary ramp at outdoor events.

Ideal for Wooden Thresholds
As the Permaramp-Original Semi-Permanent Ramp features fixing options at both the top and the bottom of the ramp, it can be screwed into place for improved safety. This makes the ramp ideal for affixing to wooden thresholds, such as a back doorway or a wooden hut.

Contrasting Safety Edge Strips
In addition to the excellent grip surface and the ability to secure the ramp in place, the Permaramp-Original also includes safety edge strips that colour contrast the main surface of the ramp. This will help to make the ramp stand out, which is crucial both for people with reduced mobility and for anybody walking nearby who may not be aware of the ramp, particularly if it is only a semi-permanent fixture. This will help to minimise the risk of trips or falls as a result of the ramp.

Sizing Information
The Permaramp-Original Semi-Permanent Wheelchair Ramp is available in a choice of sizes. Each ramp has a width of 76cm (30 inches), with the following options:

Length (cm/ft) Capacity (kg/stone) Weight (kg/lb)
90cm (3ft) 400kg (63 stone) 8.5kg (19lb)
120cm (4ft) 400kg (63 stone) 12kg (26lb)
150cm (5ft) 400kg (63 stone) 15kg (33lb)
180cm (6ft) 400kg (63 stone) 18.5kg (41lb)
210cm (7ft) 350kg (55 stone) 22kg (49lb)
240cm (8ft) 300kg (47 stone) 25kg (55lb)
Please select your required option from the drop-down menu at the top of the page.

Marsden M-610 Portable Wheelchair Weigh Beams

Marsden M-610 Portable Wheelchair Weigh Beams
It's vital that wheelchair-bound patients can be weighed accurately and easily to ensure care and treatment can properly be provided. The Marsden M-610 Portable Wheelchair Weigh Beams make it incredibly easy to weigh individuals in wheelchairs, and are ideal for use in care homes.

Durable for Long-Term Use
Regularly-used weighing scales and beams can take a lot of punishment, especially wheelchair scales, so it's vital that they can be as durable as possible. The M-610 beams are designed to be incredibly rugged and long-lasting, helping you ensure that your scale will stand the test of time.

Portable Weigh Beams
Two highly portable weigh beams are included, giving an incredible level of versatility of use. They can be set up in seconds, and the built-in low profile ramps make it incredibly easy for wheelchairs to roll on and off – perfect for elderly patients.

Easy to Use for Accurate Results
The weigh beams are also incredibly easy to use. With the patient's height entered using the full numeric keypad, the scale can calculate and display their BMI in seconds. The M-610 beams also feature a rechargeable battery built-in with a minimum of 40 hours use on a full charge, providing improved mobile use.

For further ease of use, the M-610 beams feature two large and clear screens – one for weight and one for height – making it easier to take down accurate readings. Tare and pre-set tare functions enables you to take into account wheelchair weight for more accurate readings, and a hold function holds the weight on the screen to enable you to more easily take note of the measurement.

Key Features of the Marsden M-610 Portable Wheelchair Weigh Beams
The key features of the Marsden M-610 Portable Wheelchair Weigh Beams are:

Class III approved
Durable, rugged construction for long-term use
Dual ramps improve versatility
Low-profile ramps make it easy to roll on and off the beams
Capacity of 300kg suitable for most patients
Accurate to 100g for precise weight measurement
Numeric keypad for entering patient height
Calculates BMI in seconds
Tare, pre-set tare and hold functions for accurate measurements
Technical Specifications of the Marsden M-610 Portable Wheelchair Weigh Beams
The technical specifications of the Marsden M-610 Portable Wheelchair Weigh Beams are:

Capacity: 300kg
Graduations: 100g
Weight of scale: 8.5kg per beam
Power supply: rechargeable battery/mains power
Dimensions: 1200 x 1200 x 95mm

Marsden M-620 Professional Wheelchair Scale

Marsden M-620 Professional Wheelchair Scale
It's vital that wheelchair-bound patients can be weighed accurately and easily to ensure care and treatment can properly be provided. The Marsden M-620 Professional Wheelchair Scale makes it incredibly easy to weigh individuals in wheelchairs, and is ideal for use in care homes.

Durable for Long-Term Use
Regularly-used weighing scales can take a lot of punishment, especially wheelchair scales, so it's vital that they can be as durable as possible. The M-620 is designed to be incredibly rugged and long-lasting, helping you ensure that your scale will stand the test of time.

Fold-Away Design Aids Storage and Transport
To make the scale easier to store and transport, it features a handy fold-away design. This, combined with it's built-in handle and wheels, makes it perfect for transporting room-to-room or ward-to-ward in a care home or hospital.

Easy to Use for Accurate Results
The scale is also incredibly easy to use. With the patient's height entered using the full numeric keypad, the scale can calculate and display their BMI in seconds. The M-620 also features a rechargeable battery built-in, providing improved mobile use.

For further ease of use, the M-620 features two large and clear screens – one for weight and one for height – making it easier to take down accurate readings. Tare and pre-set tare functions enables you to take into account wheelchair weight for more accurate readings, and a hold function holds the weight on the screen to enable you to easily take note of the measurement.

Key Features of the Marsden M-620 Professional Wheelchair Scale
The key features of the Marsden M-620 Professional Wheelchair Scale are:

Class III approved
Durable, rugged construction for long-term use
Fold-away design with handle and wheels makes transport and storage easier
Capacity of 300kg suitable for most patients
Accurate to 100g for precise weight measurement
Numeric keypad for entering patient height
Calculates BMI in seconds
Tare, pre-set tare and hold functions for accurate measurements
Technical Specifications of the Marsden M-620 Professional Wheelchair Scale
The technical specifications of the Marsden M-620 Professional Wheelchair Scale are:

Capacity: 300kg
Graduations: 100g
Weight of scale: 28kg
Power supply: rechargeable battery/mains power
Dimensions: 700 x 800 x 80mm

Marsden M-650 Professional Wheelchair Scale

Marsden M-650 Professional Wheelchair Scale
It's vital that wheelchair-bound patients can be weighed accurately and easily to ensure care and treatment can properly be provided. The Marsden M-650 Professional Wheelchair Scale makes it incredibly easy to weigh individuals in wheelchairs, and is ideal for use in care homes and hospitals.

Durable for Long-Term Use
Regularly-used weighing scales can take a lot of punishment, especially wheelchair scales, so it's vital that they can be as durable as possible. The M-650 is designed to be rugged and long-lasting, helping you ensure that your scale will stand the test of time.

Low-Profile Design
To make the scale easier to store and transport, it features a low-profile design. This, alongside the integral wheels and handle, enables the scale to be moves around a facility and slot into smaller storage spaces. What's more, it also makes it easier for wheelchair users to roll on and off – ideal for elderly patients.

Easy to Use for Accurate Results
The scale is also incredibly easy to use. With the patient's height entered using the full numeric keypad, the scale can calculate and display their BMI in seconds.

For further ease of use, the M-650's indicator features two large and clear screens – one for weight and one for height – making it easier to take down accurate readings. The indicator can be handheld or wall-mounted, depending on your facility's needs.

Tare and pre-set tare functions enables you to take into account wheelchair weight for more accurate readings, and a hold function holds the weight on the screen to enable you to easily take note of the measurement. The M-650 also features a rechargeable battery built-in, providing improved mobile use.

Key Features of the Marsden M-650 Professional Wheelchair Scale
The key features of the Marsden M-650 Professional Wheelchair Scale are:

Class III approved
Durable, rugged construction for long-term use
Low-profile design with handle and wheels makes transport and storage easier
Capacity of 300kg suitable for most patients
Accurate to 100g for precise weight measurement
Numeric keypad for entering patient height
Calculates BMI in seconds
Tare, pre-set tare and hold functions for accurate measurements
Technical Specifications of the Marsden M-650 Professional Wheelchair Scale
The technical specifications of the Marsden M-650 Professional Wheelchair Scale are:

Capacity: 300kg
Graduations: 100g
Weight of scale: 28.6kg
Power supply: rechargeable battery/mains power
Dimensions: 1150 x 800 x 66mm

Marsden M-651 Professional Wheelchair Scale with Column

Marsden M-651 Professional Wheelchair Scale with Column
It's vital that wheelchair-bound patients can be weighed accurately and easily to ensure care and treatment can properly be provided. The Marsden M-651 Professional Wheelchair Scale with Column makes it incredibly easy to weigh individuals in wheelchairs, and is ideal for use in care homes and hospitals.

Durable for Long-Term Use
Regularly-used weighing scales can take a lot of punishment, especially wheelchair scales, so it's vital that they can be as durable as possible. The M-651 is designed to be rugged and long-lasting, helping you ensure that your scale will stand the test of time.

Low-Profile Design
To make the scale easier to store and transport, it features a low-profile design. This, alongside the integral wheels and handle, enables the scale to be moves around a facility and slot into smaller storage spaces. What's more, it also makes it easier for wheelchair users to roll on and off – ideal for elderly patients.

Easy to Use for Accurate Results
The scale is also incredibly easy to use. With the patient's height entered using the full numeric keypad, the scale can calculate and display their BMI in seconds.

For further ease of use, the M-651's indicator features two large and clear screens – one for weight and one for height – making it easier to take down accurate readings. The indicator is mounted on a column, providing a more permanent fixture in your facility and also placing the display at eye level to the wheelchair user.

Tare and pre-set tare functions enables you to take into account wheelchair weight for more accurate readings, and a hold function holds the weight on the screen to enable you to easily take note of the measurement. The M-651 also features a rechargeable battery built-in, providing improved mobile use.

Key Features of the Marsden M-651 Professional Wheelchair Scale with Column
The key features of the Marsden M-651 Professional Wheelchair Scale with Column are:

Class III approved
Durable, rugged construction for long-term use
Low-profile design with handle and wheels makes transport and storage easier
Capacity of 300kg suitable for most patients
Accurate to 100g for precise weight measurement
Indicator on column for more permanent positioning
Numeric keypad for entering patient height
Calculates BMI in seconds
Tare, pre-set tare and hold functions for accurate measurements
Technical Specifications of the Marsden M-651 Professional Wheelchair Scale with Column
The technical specifications of the Marsden M-651 Professional Wheelchair Scale with Column are:

Capacity: 300kg
Graduations: 100g
Weight of scale: 28.6kg
Power supply: rechargeable battery/mains power
Dimensions: 1150 x 800 x 66mm

Marsden M-652 Professional Wheelchair Scale with Handrails and Cross Rail

Marsden M-652 Professional Wheelchair Scale with Handrails and Cross Rail
It's vital that wheelchair-bound patients can be weighed accurately and easily to ensure care and treatment can properly be provided. The Marsden M-652 Professional Wheelchair Scale with Handrails and Cross Rail makes it incredibly easy to weigh individuals in wheelchairs, and can also be used with standing geriatric and bariatric patients. It's ideal for use in care homes and hospitals.

Durable for Long-Term Use
Regularly-used weighing scales can take a lot of punishment, especially wheelchair scales, so it's vital that they can be as durable as possible. The M-652 is designed to be rugged and long-lasting, helping you ensure that your scale will stand the test of time.

Handrails Provide Versatility
To give the scale an increased level of versatility, the M-652 includes a pair of hand rails. These enable the scale to be used with bariatric and geriatric patients who prefer to stand but require extra help to do so. An integral cross rail at the front joints the handrails and provides increased stability, helping ensure that patients can rely on the handrails for support.

Easy to Use for Accurate Results
The scale is also incredibly easy to use. With the patient's height entered using the full numeric keypad, the scale can calculate and display their BMI in seconds.

For further ease of use, the M-652's indicator features two large and clear screens – one for weight and one for height – making it easier to take down accurate readings. Tare and pre-set tare functions enables you to take into account wheelchair weight for more accurate readings, and a hold function holds the weight on the screen to enable you to easily take note of the measurement. The M-652 also features a rechargeable battery built-in, providing improved mobile use.

Key Features of the Marsden M-652 Professional Wheelchair Scale with Handrails and Cross Rail
The key features of the Marsden M-652 Professional Wheelchair Scale with Handrails and Cross Rail are:

Class III approved
Durable, rugged construction for long-term use
Low-profile design with handle and wheels makes transport and storage easier
Capacity of 300kg suitable for most patients
Accurate to 100g for precise weight measurement
Handrails provide support to standing bariatric and geriatric patients
Numeric keypad for entering patient height
Calculates BMI in seconds
Tare, pre-set tare and hold functions for accurate measurements
Technical Specifications of the Marsden M-652 Professional Wheelchair Scale with Handrails and Cross Rail
The technical specifications of the Marsden M-652 Professional Wheelchair Scale with Handrails and Cross Rail are:

Capacity: 300kg
Graduations: 100g
Weight of scale: 28.6kg (not including handrails)
Power supply: rechargeable battery/mains power
Dimensions: 1150 x 800 x 66mm (not including handrails)

Marsden M-653 Professional Wheelchair Scale with Handrail

Marsden M-653 Professional Wheelchair Scale with Handrail
It's vital that wheelchair-bound patients can be weighed accurately and easily to ensure care and treatment can properly be provided. The Marsden M-653 Professional Wheelchair Scale with Handrail makes it incredibly easy to weigh individuals in wheelchairs, and can also be used with standing geriatric and bariatric patients. It's ideal for use in care homes and hospitals.

Durable for Long-Term Use
Regularly-used weighing scales can take a lot of punishment, especially wheelchair scales, so it's vital that they can be as durable as possible. The M-653 is designed to be rugged and long-lasting, helping you ensure that your scale will stand the test of time.

Handrail Provides Versatility
To give the scale an increased level of versatility, the M-653 includes a single handrail built in. These enable the scale to be used with bariatric and geriatric patients who prefer to stand but require a little extra help to do so.

Easy to Use for Accurate Results
The scale is also incredibly easy to use. With the patient's height entered using the full numeric keypad, the scale can calculate and display their BMI in seconds.

For further ease of use, the M-653's indicator features two large and clear screens – one for weight and one for height – making it easier to take down accurate readings. Tare and pre-set tare functions enables you to take into account wheelchair weight for more accurate readings, and a hold function holds the weight on the screen to enable you to easily take note of the measurement. The M-653 also features a rechargeable battery built-in, providing improved mobile use.

Key Features of the Marsden M-653 Professional Wheelchair Scale with Handrail
The key features of the Marsden M-653 Professional Wheelchair Scale with Handrail are:

Class III approved
Durable, rugged construction for long-term use
Low-profile design with handle and wheels makes transport and storage easier
Capacity of 300kg suitable for most patients
Accurate to 100g for precise weight measurement
Handrail provides support to standing bariatric and geriatric patients
Numeric keypad for entering patient height
Calculates BMI in seconds
Tare, pre-set tare and hold functions for accurate measurements
Technical Specifications of the Marsden M-653 Professional Wheelchair Scale with Handrail
The technical specifications of the Marsden M-653 Professional Wheelchair Scale with Handrail are:

Capacity: 300kg
Graduations: 100g
Weight of scale: 28.6kg (not including handrail)
Power supply: rechargeable battery/mains power
Dimensions: 1150 x 800 x 66mm (not including handrail)

Economy Moulded Wheelchair Lap Tray

Economy Moulded Wheelchair Lap Tray
When it comes to wheelchair trays, it is important that they are easy to set up and designed to hold the required items without any unfortunate incidents. With its moulded rim and a recessed area, the Economy Moulded Wheelchair Lap Tray is designed to prevent items from sliding off, while two D-Ring hook and loop straps ensure easy and secure attachment.

Key Features of the Economy Moulded Lap Tray
Extremely durable and lightweight wheelchair tray
Fitted with a moulded rim and a recessed area for a cup or a glass
Includes two D-Ring hook and loop straps for secure attachment
Can easily be fitted and adjusted
Measurements: 65 x 55cm (23 x 21")
Cut-out area measurements: 37 x 23cm (14 x 9")
Weight: 1.6kg
Practical and Easy To Use
The Economy Moulded Lap Tray features a moulded rim that prevents items from sliding off, as well as a recessed area, ideal for putting down your cup or glass. Furthermore, it comes with two D-Ring hook and loop straps for easy and secure attachment to the wheelchair. Due to its compact dimensions and low weight, the Lap Tray is easy to remove, transport and store when no longer needed.

Please note that while the image shows the Lap Tray on a wheelchair, the wheelchair is not included in this offer.

Flip Away Half Lap Wheelchair Tray

Flip Away Half Lap Wheelchair Tray
The Flip Away Half Lap Wheelchair Tray is a practical and easy-to-use tray, designed to accommodate an active and functional lifestyle. It can be easily fastened to either a full-length or desk-style upholstered wheelchair arm and quickly lifted up and out of the way when no longer needed.

Features of the Flip Away Half Lap Wheelchair Tray
Easily lifts up and out of the way during transfers
Can be fastened to either a full-length or desk-style upholstered wheelchair arm
Includes a moulded rim and recessed area for a cup or a glass
Made from scratch resistant plastic for durability
Measurements: 33 x 53cm (13 x 21")
Total weight: 2kg
Available in two colours and for the Left or the Right side of the chair
Who Can Benefit from the Wheelchair Tray?
The Wheelchair Tray is designed for people who enjoy an active lifestyle. It can easily be fastened to either side of a wheelchair and quickly lifted up and out of the way when no longer needed.

Its moulded rim and recessed area can be extra practical for putting down a glass or a cup, while the Translucent option of the scratch resistant plastic allows the user to view their lower extremities for additional safety.

Lomax 9HD Side Panel and Armrest

Lomax 9HD Side Panel and Armrest
The Lomax 9HD Side Panel and Armrest is the side panel and armrest only for the Lomax 9HD Wheelchair, 19x17" seat. The Lomax 9HD Side Panel and Armrest is a replacement part only.

The Lomax 9HD Side Panel and Armrest left and right should be determined when sitting in the wheelchair, whether the replacement part is needed on your left or right.

SKM 100 Easystore Junior Spacesaver Table

Tables that provide accessibility to all types of different users can be large and cumbersome, as wheelchairs, standing frames and walkers may all feature different working height requirements. The SKM 100 Easystore Junior Spacesaver Table is designed to cater to all of these needs, while remaining compact and easy to store in environments with limited space. It does this by folding to a completely vertical position in seconds, allowing it to be stored away in narrow spaces with ease.

This table is available in three different lengths to suit different needs and users. Choose your desired length from the drop-down menu at the top of the page.

Simple Electronic Adjustment
Since different standing frames and wheelchairs require different working heights, this table is height adjustable from 52cm to 72cm. It can also tilt to a fully vertical position, allowing for easy storage in most environments.

These adjustments are both carried out with the push of a button, making electronic control of this table a breeze. Battery back-up is also included, allowing for use away from the main power supply and eliminating the need for dangerous trailing cables.

Easystore Spacesaver Table Electronic Adjustment

Compact Storage
Compared to other accessible tables, the Easystore Spacesaver Table is exceedingly easy to store, as it can be tilted completely vertically. Whether your aim is to store this table in a classroom, clinic or home environment, you won't find another table with this level of function and convenience. For added safety, the table locks into place in flat and vertical positions, meaning it won't slip or fall when you don't want it to.

Easystore Table Easy Storage With Vertical Tilt

Safe and Hygienic
This table is suitable for use during all types of activities, and so it is able to stand up to nearly any challenge normal use will provide. Its attractive beech tabletop is complete with a laminate finish, making it highly durable and easy to clean. To ensure the table is safe without unwanted rolling, it is fitted with four swivelling, locking castors.

Table Dimensions
This table is available in three different lengths to suit different user needs. The three sizes are as follows:

Dimensions (LxDxH):
165 x 105 x 52 - 72cm
200 x 105 x 52 - 72cm
240 x 105 x 52 - 72cm
Please note: As this product is made to order, it is non-returnable unless damaged and may be subject to an additional delivery time. For more information, contact our Customer Support Team at 020 7720 2266.

SKM 100 Easystore Standard Spacesaver Table

Tables that provide accessibility to all types of different users can be large and cumbersome, as wheelchairs, standing frames and walkers may all feature different working height requirements. The SKM 100 Easystore Standard Spacesaver Table is designed to cater to all of these needs, while remaining compact and easy to store in environments with limited space. It does this by folding to a completely vertical position in seconds, allowing it to be stored away in narrow spaces with ease.

This table is available in three different lengths to suit different needs and users. Choose your desired length from the drop-down menu at the top of the page.

Simple Electronic Adjustment
Since different standing frames and wheelchairs require different working heights, this table is height adjustable from 67cm to 100cm. It can also tilt to a fully vertical position, allowing for easy storage in most environments.

These adjustments are both carried out with the push of a button, making electronic control of this table a breeze. Battery back-up is also included, allowing for use away from the main power supply and eliminating the need for dangerous trailing cables.

Easystore Spacesaver Table Electronic Adjustment

Compact Storage
Compared to other accessible tables, the Easystore Spacesaver Table is exceedingly easy to store, as it can be tilted completely vertically. Whether your aim is to store this table in a classroom, clinic or home environment, you won't find another table with this level of function and convenience. For added safety, the table locks into place in flat and vertical positions, meaning it won't slip or fall when you don't want it to.

Easystore Table Easy Storage With Vertical Tilt

Safe and Hygienic
This table is suitable for use during all types of activities, and so it is able to stand up to nearly any challenge normal use will provide. Its attractive beech tabletop is complete with a laminate finish, making it highly durable and easy to clean. To ensure the table is safe without unwanted rolling, it is fitted with four swivelling, locking castors.

Table Dimensions
This table is available in three different lengths to suit different user needs. The three sizes are as follows:

Dimensions (LxDxH):
165 x 105 x 67 - 100cm
200 x 105 x 67 - 100cm
240 x 105 x 67 - 100cm
Please note: As this product is made to order, it is non-returnable unless damaged and may be subject to an additional delivery time. For more information, contact our Customer Support Team at 020 7720 2266.

SKM Easystore Junior Wheelchair Therapy Table

Tables that provide accessibility to wheelchair users can be large and cumbersome, as different wheelchairs may feature completely different working height requirements. The SKM 100 Easystore Junior Wheelchair Therapy Table is designed to cater to all of these needs, while remaining compact and easy to store in environments with limited space. It does this by folding to a completely vertical position in seconds, allowing it to be stored away in narrow spaces with ease.

This table is available in three different lengths to suit different needs and users. Choose your desired length from the drop-down menu at the top of the page.

Simple Electronic Adjustment
Since different wheelchairs require different working heights, this table is height adjustable from 52cm to 72cm. It can also tilt to a fully vertical position, allowing for easy storage in most environments.

These adjustments are both carried out with the push of a button, making electronic control of this table a breeze. Battery back-up is also included, allowing for use away from the main power supply and eliminating the need for dangerous trailing cables.

Easystore Therapy Wheelchair Table Electronic Adjustment

Full Wheelchair Access
For many wheelchair users, the traditional straight design of a table makes getting up close and personal with your work a challenge. This table features a front cut-out, measuring 50cm by 15cm, providing plenty of space for those sitting in a wheelchair to move closer to the table surface. This cut-out facilitates close control, and allows for more focus on activities.

Compact Storage
Compared to other wheelchair-accessible tables, the Easystore Therapy Table is exceedingly easy to store, as it can be tilted completely vertically. Whether your aim is to store this table in a classroom, clinic or home environment, you won't find another table with this level of function and convenience. For added safety, the table locks into place in flat and vertical positions, meaning it won't slip or fall when you don't want it to.

Safe and Hygienic
This table is suitable for use during all types of activities, and so it is able to stand up to nearly any challenge normal use will provide. Its attractive beech tabletop is complete with a laminate finish, making it highly durable and easy to clean. To ensure the table is safe without unwanted rolling, it is fitted with four swivelling, locking castors.

Table Dimensions
This table is available in three different lengths to suit different user needs. The three sizes are as follows:

Dimensions (LxDxH):
165 x 90 x 52 - 72cm
200 x 90 x 52 - 72cm
240 x 90 x 52 - 72cm
Please note: As this product is made to order, it is non-returnable unless damaged and may be subject to an additional delivery time. For more information, contact our Customer Support Team at 020 7720 2266.

SKM Easywind Four-Leg Group Table

For children and adults who often use wheelchairs, standard tables may not have the necessary adaptability to facilitate all their activities. For these people, specially designed, height adjustable tables may be needed. The SKM Easywind Four-Leg Group Table is a multi-purpose table, made to facilitate all types of activities for up to four wheelchair users at a time. With height adjustability and a large, laminated work surface, this table is an excellent option for a wide range of environments.

One Table for All Activities
For wheelchair users, it is often necessary to purchase a range of tables for different uses. This table, however, is suitable for almost anything, including craftwork, dining, computer work and classroom activities. Additionally, since it can be accessed by up to four wheelchair users at a time, it's perfect for groupwork or where space is at a premium.

Safe and Hygienic
Spacious and sturdy, the SKM Easywind Four-Leg Group Table has a special hard-wearing laminate finish tabletop which makes it highly resistant to stains and water damage. It is also made to be easy to clean, with no sharp edges where debris could become trapped. Simply wipe down the table in seconds and have it ready for its next activity.

Height Adjustable
Different wheelchairs will often have different height requirements for work surfaces, and this table is made with this is mind. Its height is fully adjustable with an easy-to-use wind-up crank handle, meaning that anyone can adapt this table to their liking, regardless of strength.

Features of the SKM Easywind Four-Leg Group Table
Laminate finish tabletop for hygiene maintenance
Suitable for a wide range of activities
Versatile enough for most environments
Wind-up crank handle makes adjustment easy
Can accommodate up to four wheelchair users
Available in Standard or Junior sizes
Dimensions and Specifications
Junior
Dimensions (LxWxH): 160 x 105.5 x 43 - 58cm
Standard
Diameter (LxWxH): 160 x 105.5 x 54 - 80cm
Please note: As this product is made to order, it is non-returnable unless damaged and may be subject to an additional delivery time. For more information, contact our Customer Support Team at 020 7720 2266.

SKM Easywind Joystick Access Table

For many children, especially those who frequently use powered wheelchairs, conventional tables do not provide enough freedom and adaptability to cater to their unique needs. For these children, activity surfaces must be extremely versatile, allowing for a range of different positions, heights and angles. The SKM Easywind Joystick Access Table is designed specifically for these purposes, and provides children with an easy work surface that allows them to maintain full functional control over their wheelchair.

This table is available in two sizes: Junior or Standard. Select your desired size from the drop-down menu at the top of the page.

Complete Joystick Access
For children who are used to moving with the help of a powered wheelchair, it can seem like an extension of their own body that cannot be done without. The designers of this table recognised this fact, including the capacity for close-in access for powered wheelchairs, letting children keep their independence. The user will be able to complete their activities free from distraction, with the ability to move unrestricted.

Fully Adaptable
This is no ordinary table, as it is designed with incredible levels of flexibility and adaptability. The tabletop surface is able to tilt from 0¡ to 70¡, making it perfect for children in wheelchairs or on low seats. The table is also height adjustable, meaning that children of all shapes and sizes can use it for all types of activities while remaining comfortable and engaged.

Safe and Convenient
The SKM Easywind Joystick Access Table can be easily manoeuvred throughout its environment, as it is fitted with four swivelling castors. To ensure the table will not accidentally slip or pivot, two of the castors are lockable, maintaining the table securely in place. This leaves the child free to concentrate on the task at hand with no risk of danger.

Table Dimensions
Junior
Dimensions (LxWxH): 120 x 60 x 52 - 66cm
Standard
Dimensions (LxWxH): 120 x 60 x 60 - 86cm
Please note: As this product is made to order, it is non-returnable unless damaged and may be subject to an additional delivery time. For more information, contact our Customer Support Team at 020 7720 2266.

HurryCane Walking Stick (Purple)

VAT Relief
HurryCane Walking Stick (Purple)
The HurryCane Walking Stick is designed to outperform all other canes, with three supportive feet that pivot on a moving head to provide ideal support at any angle. Designed to bring the traditional cane into the 21st century, the HurryCane allows you to sit, rise or lean – all without worrying about your cane slipping out from under you!

SteadiGrip Base for Stability
While typical canes and walking sticks include one foot at the base, the HurryCane features three – allowing it to make more contact with the ground at all times for unrivalled stability. These feet are made with textured grooves, which provide them with great grip on the ground to provide traction on virtually any terrain. Designed to avoid skidding at any angle, these feet allow the HurryCane to outperform standard canes in terms of grip.

Steadigrip base pivots to keep three feet on the ground
The HurryCane's base pivots 360° to support you at all angles

Key Features and Benefits
Lightweight cane with a pivoting base for stability at any angle
WhisperFlex base is equipped with three feet for traction on any terrain
SteadiGrip feet with three points of contact for excellent balance
Silent pivoting movement is designed to move with you as you walk
Base pivots 360° to allow a full range of movement
Freestanding design supports you while standing and sitting
Adjustable with eight height settings between 77.5cm and 95cm (30.5 - 37.5")
Shock-absorbing comfort-fit handle provides comfort and control
Made with a lightweight anodised aluminium shaft for easy carrying
Freedom Edition pack includes convenient wrist strap and carry bag
Folding design allows easy and compact storage
Weight capacity of 159kg (25 stone) is suitable for most users
Are Other Colours Available?
Yes, the HurryCane is available in the following three additional colours:

Black
Blue
Red
WhisperFlex Base Pivots for Balance at Any Angle
When standing up from a sitting position, most canes will lose some of their grip with the ground, causing them to skid or slip out from under you. The HurryCane's base pivots so that pressure is centralised at any angle, allowing you to rely on your cane for support with peace of mind. This, coupled with the freestanding design, makes the HurryCane excellent for providing support while moving from a sitting to a standing position.

Foldable and Adjustable
The HurryCane places convenience first, which is why it features eight height adjustments and can be folded easily for storage. Folded down completely, the cane is just 35cm in height, allowing you to store it away in the included carry bag for when it's needed most.

Adjustable with eight heights for convenience
With eight height adjustments, the HurryCane is suitable for virtually any user

Shock-Absorbing Handle
To ensure the HurryCane is comfortable for use all day long, the handle provides a shock-absorbing effect to spare your hands shock from the jarring impact with the ground. Providing excellent grip and control, this handle is easy and pleasant to hold for all-day use.

How Do I Replace the HurryCane's Feet?
Spare Feet are available for your HurryCane if the feet supplied with your cane are worn down, and it's simple to remove them using a Phillips head screwdriver. For detailed instructions and a diagram showing how to remove your HurryCane's feet, click the PDF link below.

How to Remove Your HurryCane's Feet
How to Remove the Feet of the Hurrycane
What If I Need a Spare Wrist Strap?
Without removing the feet of the HurryCane, it can be difficult to attach a new wrist strap. We recommend using the Plaited Leather Walking Stick Wrist Loop, as it features a press stud, or snap fastener, that can fit around all sizes of walking stick.

M+D Adjustable Forearm Crutches (Pair)

M+D Adjustable Forearm Crutches (Pair)
Traditional crutches leave much to be desired, and will often cause pain by putting extreme pressure on the hands, wrists and armpits – making them uncomfortable when used throughout the day. The M+D Adjustable Forearm Crutches bring some much-needed innovation to the area, distributing pressure evenly along the user's forearms and elbows to make them the most comfortable lightweight crutches on the market.

The M+D Forearm Crutches are supplied in one size to fit everyone from 4'11" - 6'8" (149 - 203cm), and are available in either Black or White. Select your desired colour using the drop-down menu above.

How Do the M+D Forearm Crutches Work?
Improving on the archaic design of standard forearm and axillary crutches, the M+D Crutches greatly improve user comfort by evenly distributing weight throughout the forearms and elbow, all but eliminating the hand, wrist and armpit pain caused by most crutches. Incorporating a lockable hinged arm cradle, flexible armbands and shock-absorbing feet, the M+D Crutches are designed to remain comfortable throughout the day, and work for you in your daily life.

Who Can Use the M+D Forearm Crutches?
These crutches can be used by virtually anyone who can use regular crutches, and even some who can't! Those who find regular crutches too painful or stressful on their wrists, hands and armpits will find these crutches much more comfortable, which increases patient compliance and makes getting around a whole lot easier.

See the M+D Forearm Crutches in Action
Watch the video below for a short overview of the main features of the M+D Crutches'.

Special Features of the M+D Adjustable Forearm Crutches
These crutches are packed with innovative features to make them the most comfortable and convenient for your daily life, which can be seen in the diagram below. Some of the main features include:

Flexible Arm Bands: Easy to get in and out of, these arm bands will conform to the shape of the user's arm for a firm and secure fit
Lockable Hinged Arm Support: Designed to spread the weight evenly along your arm, the arm cradle can actually be unlocked to allow for easy reaching and other arm movements throughout your day
Rotating Handles: With the touch of the blue button on the end of the handle, it will swing down to allow full access for things like using keys, turning handles or shaking hands
Shock Absorbing Feet: These feet cushion the crutch's impact with the ground, providing minimal shock to your forearms with each step
M+D Comfortable Forearm Crutches (Pair)

Will These Crutches Fit Me?
The M+D Crutches are easily adjustable to fit most users, and suit anyone from 149 - 203cm (4'11" - 6'8") in height. This allows them to fit nearly anyone, and can be adjusted to fit multiple users.

Are These Crutches Lightweight?
Yes, these crutches are very light in weight, weighing in at just 1.3kg each. This light weight allows them to be used by people of all ages and strengths, and will increase patient compliance by allowing them to be used for each and every errand throughout the day.

How Much More Comfortable Are M+D Crutches Than Standard Crutches?
M+D Crutches don't just claim to be the most comfortable crutches on the market – they've actually done the research to back it up. In a survey of crutch users who have tried the M+D Crutches to replace their regular ones, M+D found a 373% improvement in reported pain to the hands and wrists, as well as a 124% improvement in pain to the forearms and elbows and a 67% improvement to shoulder pain. These numbers speak for themselves, and demonstrate the power of this innovative design!

How Do I Set Up the M+D Crutches?
This pair of M+D Crutches is supplied with everything you need to get started right away, and all you need to complete the setup process is a coin! Watch the video below for step-by-step instructions on how to set your crutches up and ensure they are properly fitted to you for maximum comfort:

How Do I Walk with the M+D Adjustable Forearm Crutches?
Walking with the M+D Crutches is simple and intuitive, but it may take a few minutes to get used to the new crutch design. Watch the video below for a quick overview of all the functions of the M+D Crutches, as well as some useful tips to get you walking with comfortable support right away:

Are These Crutches Supplied As a Pair?
Yes, the M+D Forearm Crutches are supplied as a pair: one for the left, and one for the right. The right crutch features a single braille button located on top of the right crutch's handle release button, ensuring you will be able to tell the left and right crutches apart, even if you have to get up in the dark in the middle of the night.

How Do I Adjust the M+D Crutches?
As explained in the setup video above, all adjustments to these crutches can be made with the touch of a button, or with a coin or screwdriver. The adjustments are designed to be made with a coin, making it simple to make changes to your crutches – even when you're out and about!

How Do I Rotate the Handles?
Allowing you full freedom of movement with your hands, the handles of the M+D Crutches can be easily rotated away. To rotate the handles, simply push the button on the end of each handle. At this point, the handle will become loose, and you can simply let go as the handle swivels away to leave your hand free.

How Do I Detach the Armrest?
The armrests can be allowed to swivel upwards by pressing the unlock button beside the rest. This will allow you to reach out and grab items that other forearm crutches would block. To re-lock the armrests, simply press in the button on the other side of the rest.

Are These Crutches Suitable for Hospital Use?
Yes, the M+D Forearm Crutches are ideal for hospital use, and not only because they are easier and more comfortable to use. The armrests are antimicrobial and easy to wipe down, allowing these crutches to be safely disinfected in between use by multiple patients.

Key Information
Suitable user height: 149 - 203cm (4'11" - 6'"8)
Maximum user weight: 300lb (136kg)
Weight of each crutch: 1.3kg (2.9lb)
Shipping box dimensions: 84 x 25 x 15cm (33 x 10 x 6")
Weight when shipped: 9lb (4kg)

Bamboo Hiking Pole

Bamboo Hiking Pole
For better mobility on countryside excursions, why not use a traditional hiking staff? An ancient design, the hiking staff has been honed over hundreds of years in order to achieve something that improves your balance, mobility and safety when hiking.

The Bamboo Hiking Pole is made from high-quality bamboo, making it strong yet extremely lightweight. Easy to manoeuvre yet highly supportive, it's the ideal companion for a variety of countryside hikes.

Key Information
Height: 54" (137cm) approx.
Shaft Colour: Light Wood
Shaft Pattern: Plain
Shaft Material: Bamboo
Handle Style: Staff
Handle Material: Bamboo
Handle Colour: Light Wood
Ferrule Style: Alpine
Wrist strap included
Lightweight Bamboo
A wonder material, bamboo is extremely light yet has a strength that rivals wood, brick, concrete and even steel. This makes it ideal for difficult hikes where a high degree of support and manoeuvrability is required. Comfortable to the touch, bamboo's ridged texture makes for an easy grip.

Practical Design
The staff is supplied with an alpine ferrule as standard. Specially developed for icy surfaces, its sharp spike provides fantastic grip on nearly all types of outdoor terrain. Meanwhile, an included wrist strap helps ensure support is at hand at all times.

Chestnut Hiking Staff with Bark

Chestnut Hiking Staff with Bark
For better mobility on countryside excursions, why not use a traditional hiking staff? An ancient design, the hiking staff has been honed over hundreds of years in order to achieve something which improves your balance, mobility and safety when hiking.

Made from a solid piece of chestnut with the bark intact, the Chestnut Hiking Staff with Bark is a beautifully rustic hiking staff. Sturdy, strong and fitted with a versatile alpine spike ferrule, the Chestnut Hiking Staff with Bark is a reliable companion for rural environments.

Key Information
Height: 54" (137cm) approx.
Shaft Colour: Dark Wood
Shaft Pattern: Wood Grain (Bark)
Shaft Material: Chestnut
Handle Style: Staff
Handle Material: Chestnut
Handle Colour: Dark Wood
Ferrule Style: Alpine
Wrist strap included
Handmade Heritage
This traditional chestnut hiking stick is not just made, it is grown! The ancient technique of coppicing involves cutting back the source trees about a metre back from the ground, stimulating the growth of new shoots that grow to an appropriate diameter for a walking stick.

Alpine Ferrule
The Chestnut Hiking Staff with Bark is supplied with an alpine ferrule as standard. Specially developed for icy surfaces, its sharp spike provides fantastic grip on nearly all types of outdoor terrain.

Short Height-Adjustable Mini Folding Blue Morris Derby Walking Stick

Short Height-Adjustable Mini Folding Blue Morris Derby Walking Stick
The Short Height-Adjustable Mini Folding Blue Morris Derby Walking Stick combines reliability with convenience by offering a sturdy support with an adjustable height. It is shorter in height than the average walking stick, and can also be folded into a compact size for easier transportation.

Key Features
Adjustable height of between 28.5" and 32.5" to provide comfortable use for shorter individuals
Folds into five sections to fit compactly into a handbag or luggage for ease of transportation
Strong yet lightweight aluminium walking stick is not cumbersome to carry
Wooden Derby handle is comfortable to hold for improved gripping
Ferrule helps to absorb impact with the ground while improving steadiness of use
Wrist cord is included to reduce the risk of the stick falling to the ground
Adjustable Shorter Height
The Mini Folding Walking Stick offers an adjustable height of between 28.5" and 32.5", and can be altered with the simple touch of a button and pulling up or pushing down the stick accordingly, before clicking the button securely into place.

Using a stick of a suitable height for the individual is paramount for ensuring comfort, safety, and a healthier posture. This shorter height makes it ideal for people requiring a walking stick that is shorter than average.

Folding Design
With the ability to be folded down into five sections, the Height-Adjustable Derby Handle Walking Stick can be altered from its standard vertical design to a more compact size. This will be particularly ideal for storing in a handbag or in luggage for when travelling, ensuring the walking stick does not need to be left behind when commuting or on holiday.

The ability to fold the stick away also makes it a great option for anybody with varying mobility needs. If a walking stick is only required at certain times, for example when taking a short walk after using a mobility scooter, the stick can be stored in a basket or similar storage facility so that gentle strolls and exercise can be taken when required.

Reliable and Comfortable to Use
The Mini Folding Derby Handle Walking Stick is constructed from strong yet lightweight aluminium, meaning it provides reliable and sturdy support to the individual without being too cumbersome to carry around. It features a wooden handle in a Derby style, which is comfortable to hold onto, ideal for using the walking stick for extended periods.

The ferrule absorbs impact with the ground and helps to improve stability, and the inclusion of a wrist cord means that the stick can be hooked to the wrist at all times to prevent it from falling to the ground and thus eliminating the need to bend down to retrieve it.

Blue Morris Design
The blue Morris design of the aluminium adds a touch of style to the walking stick, providing an attractive design from top to toe. This is a great way to add a touch of personality to your walking stick.

The visual appeal of the stick also lends itself as a great birthday or Christmas gift for a loved one, providing them with the mobility support they may require without compromise to style.

Adjustable Shooting Stick with Extra Large Tan Leather Seat

Adjustable Shooting Stick with Extra Large Tan Leather Seat
Outdoor events and pursuits bring joy to the lives of many, and having reduced mobility needn't mean you should miss out. The timeless shooting stick design combines a walking stick with a folding chair, helping you to get around but also allowing you to grab a rest when needed.

The Adjustable Shooting Stick with Extra Large Tan Leather Seat features a stylish, practical design, with a beautiful and comfortable extra-large tan leather seat. Ideal for outdoor events, it offers sturdy support in both the stand-up and seated positions.

Key Information
Height: Adjustable from 30.5" to 37.5" (77.5 - 95cm)
Shaft Colour: Black
Shaft Pattern: Plain
Shaft Material: Stainless Steel
Handle Style: Seat
Handle Pattern: Plain
Handle Material: Leather
Handle Colour: Dark Tan
Ferrule Style: Spiked with ground plate
Seat Length: 4.25" (11cm)
Seat Width (Including Handles): 17.5" (44.5cm)
Seat Width (Excluding Handles): 13" (33cm)
Maximum User Weight: 100kg (approximately 15.75 Stone)
Comfortable Seat
Made from genuine leather, the seat is comfortable to sit and has an increased-size design to comfortably accommodate larger individuals (a standard size version is also available). This can prove invaluable for outdoor performances or spectator sports where seating is limited.

Practical Ferrule
The Adjustable Shooting Stick is supplied with a practical spike ferrule with ground plate. The spike digs into the ground to provide superb grip on soft surfaces, while the ground plate supplies balance and prevents the spike from sliding too far into the ground.

Anatomical Height-Adjustable Walking Stick with Shock Absorber

VAT Relief
Anatomical Height-Adjustable Walking Stick with Shock Absorber
The perfect choice for those looking for more personalised support, the Anatomical Height-Adjustable Walking Stick with Shock Absorber gives the user optimised comfort. Designed to specifically fit the left or right palm, this walking stick distributes pressure across the palm to increase comfort in use.

Key Information
Height: Adjustable from 29" to 37" (73.5cm to 94cm)
Shaft Colour: Black
Shaft Pattern: Plain
Shaft Material: Aluminium
Handle Style: Anatomical
Handle Material: Plastic
Handle Colour: Black
Ferrule Style: Rubber
User Weight Limit: 17 stone (110kg)
A built-in shock absorber in the product shaft
Wrist cord included
Built-In Shock Absorber
When taking a stroll, it's not all soft ground and even terrain. As walking sticks hit hard ground, the shock from the impact can affect the user's hands, arms and legs. The Anatomical Adjustable Cane's built-in shock absorber acts to take in most of this shock, thus diverting it away from the user and reducing the risk of damage.

Anatomical Handle
Easy to grip and comfortable to use, this Shock-Absorbing Cane's simple but effective design is the perfect aid for the left or right handed user. The anatomical handle adds a touch of individuality as the shape allows the palm to slot perfectly atop the stick to reduce the amount of stress on the hand.

What Are the Measurements of the Natural Derby Cane?
Ease of use is at the core of this cane's design. The simple toggle and screw lock adjusts the walking stick from 29" to 37" (73.5cm to 94cm) to allow personalised use for a wide range of users without impacting on good posture from using the wrong sized aid.

When Can I Use the Black Adjustable Walking Stick?
The Anatomical Cane is ready to use night or day. The classic black design means it is the perfect accessory whether you are popping to the shops or attending that eagerly awaited party.

Please note that this cane is not intended for use by users over 17 stone (110kg).

Does this Cane Include a Wrist Cord?
This Shock-Absorbing Stick includes a wrist cord to ensure reliable support by reducing the risk of dropping the walking stick. This can be wrapped around the wrist when the cane is in use.

Is the Anatomical Cane Eligible for VAT Relief?
The Derby Height-Adjustable Walking Stick is eligible for VAT Relief. For more information, please visit our VAT Relief information page.

Left-Handed Adjustable Atlas Fischer Bariatric Orthopaedic Cane

Left-Handed Adjustable Atlas Fischer Bariatric Orthopaedic Cane
When you have excess weight, walking sticks can feel too flimsy and weak to support you properly. With its strong stainless steel shaft and supportive Fischer handle, the Left-Handed Adjustable Atlas Fischer Bariatric Orthopaedic Cane has been designed for the heavier person. Its handle also contours to your hand for improved comfort, which is particularly useful for those who suffer from a hand condition.

Designed for the Heavier Person
This Atlas Fischer Orthopaedic Cane has been designed for the heavier user. The stick can support a maximum user weight of approximately 34 stone (225kg) when the cane is used normally. Please note that walking sticks should not be used in lieu of crutches or walking frames if these would be more appropriate and medical advice should be sought if necessary.

Fischer Handle
The Adjustable Bariatric Orthopaedic Cane has a contoured Fischer handle that's ideal for those who suffer from hand problems like arthritis and rheumatism. This is because the shape of the handle spreads pressure across the whole of your hand as opposed to in one particular area.

Sturdy Stainless Steel Shaft
Manufactured from stainless steel, the Atlas Fischer Cane is extremely sturdy to ensure you remain safe throughout use. Despite its strong design, the support only weighs 820 grams so you can carry it around with you easily when you don't need to use it. The mobility aid is also fitted with a non-slip rubber ferrule to prevent slips and falls.

Sizing of the Bariatric Cane
This Left-Handed Orthopaedic Support is adjustable in height between 82cm and 105cm (approximately 32" to 41"). This means you can get a more personalised fit to ensure you remain as comfortable as possible throughout use.

Technical Specifications
Colour: Black
Handle type: Fischer
Handle material: Stainless steel
Product weight: 820g
Shaft type: Height adjustable
Shaft material: Stainless steel
Ferrule diameter: 19mm
Ferrule material: Rubber
Please note that only the Left-Handed Orthopaedic Cane is provided when you purchase this item. The right-handed version of this mobility aid can be found here.

Soft Grip Fischer Handle Carbon Fibre Walking Stick

VAT Relief
Soft Grip Fischer Handle Carbon Fibre Walking Stick
In order to be effective for everyday use, it helps if a walking stick is light and compact enough to be easily carried and stowed in tight spaces, such as in a car boot. The Soft Grip Fischer Handle Carbon Fibre Walking Stick combines lightness, adjustability and an anatomical handle for ultimate practicality in day-to-day use.

Key Information
Height: Adjustable from 30 - 37" (76 - 94cm)
Shaft Colour: Dark Brown
Shaft Material: Carbon Fibre
Handle Style: Fischer
Handle Material: Rubber
Handle Colour: Black
Carbon Fibre Shaft
This stick features a shaft composed of carbon fibre. This advanced material is both incredibly lightweight and extremely strong, resulting in a stick that is highly comfortable to manoeuvre and very durable.

Telescopic Design
The Soft Grip Fischer Handle Carbon Fibre Walking Stick has a telescopic design that can be adjusted from 30 - 37". This means the stick length can be modified when required, either to suit different user heights or to fit into a tight space.

Ergonomic Fischer Handle
The Fischer handle is a specialist ergonomic design that moulds to the user's palm, distributing pressure across the hand for a comfortable grip. This unique design means that specific left and right handed versions are available, so please make sure to select the appropriate version for you from the drop-down menu above.

Adjustable Black Mono Flipstick Seat Walking Stick

Adjustable Black Mono Flipstick Seat Walking Stick
When you often feel as though you need to have a rest while you're outside, it can be difficult to find a seat. The Adjustable Black Mono Flipstick Seat Walking Stick has a handle that can be turned into a seat, allowing you to rest wherever you are. Its easy mechanism can be operated even by those who have weak wrists.

Lightweight and Practical Seat Stick
This Adjustable Black Walking Stick is lightweight at just 540 grams, allowing you to take it with you wherever you go. Its all-black design makes the support look sleek.

Convenient Seat
Designed with a dark green, plastic seat, the Mono Flipstick Seat Stick's handle can be turned into a seat extremely quickly so you get the support you need as soon as you need it. With its easily-operated mechanism, the handle can be "flipped" to a horizontal position to provide you with a convenient and comfortable seat. This makes it perfect for those who often get tired when they're on the go.

Sturdy Leg
The Mono Seat Walking Stick has been created with a single leg, making it a favourite among those who are more active and don't suffer from issues with their balance. The support's leg is made from aluminium, which is a sturdy but light material. This ensures you remain safe throughout use.

Size Guide for the Black Mono Walking Aid
With its height-adjustable design, the Black Mono Walking Stick can be altered from 87cm to 93cm (approximately 34" to 36.5"). This makes it suitable for a wide range of users. The seat height is also adjustable from 77cm to 84cm (approximately 30" to 33"), allowing you to remain comfortable throughout.

Please note that the recommended user weight limit is approximately 20 stone (130kg). This ensures the Flipstick Seat Stick can be used by a wide range of people.

Technical Specifications
Colour: Black
Seat material: Plastic
Product weight: 540g
Leg type: Mono and height adjustable
Leg material: Aluminium
Ferrule diameter: 22mm
Ferrule material: Rubber
Please note that although some of the pictures on this product show a green support, this version is black; the images simply help you see the flipstick's mechanism.

Adjustable British Poppies Derby Cane

VAT
Adjustable British Poppies Derby Cane
Long gone are the days when a cane served only as a support. Even if you do rely on it on a daily basis, finding a walking stick that doubles as an accessory has never been easier. The Adjustable British Poppies Derby Cane is a striking height-adjustable everyday walking stick, featuring a vivid print of watercolour poppies, one of Britain's best-loved wildflowers.

Key Features of the Adjustable British Poppies Derby Cane
Height-adjustable from 73cm to 95cm (approximately 29" - 37.5")
Covered with a vivid print of watercolour poppies
Traditional Derby handle is comfortable to hold
Fitted with a chrome collar and a non-slip, rubber ferrule
Ferrule diameter: 16mm
Weight: 265g
One of Britain's Best-Loved Wildflowers
This Adjustable British Poppies Derby Cane is part of our British Wildflowers Derby collection, and features one of Britain's best-loved wildflowers. The poppy is a symbol of remembrance for soldiers who lost their life in conflict, and was adopted for this purpose after the First World War, and the publication of John McCrae's 1915 poem "In Flanders Fields", with its famous first line.

The naturalistic poppies are contrasted with a black background, creating a visually intriguing pattern that matches a range of outfits. This cane is suitable for everyday use, but especially perfect for Remembrance Day events.

Height-Adjustable to Fit Your Needs
The lightweight aluminium shaft can easily be adjusted from 73cm to 95cm (approximately 29" - 37.5"), which makes it suitable for a wide variety of users. This is especially practical if you're not entirely sure how tall your walking stick should be, or if you're buying the cane for someone else.

Find Your Favourite British Wildflower
Our British Wildflowers Derby collection includes traditional walking sticks, decorated with some of the most popular British wildflowers, including poppies, cornflowers and daisies. Pick your favourite from the list below:

Adjustable British Cornflowers Derby Cane
Adjustable British Daisies Derby Cane
Folding Adjustable British Cornflowers Derby Cane
Folding Adjustable British Daisies Derby Cane
Folding Adjustable British Poppies Derby Cane

Brown Fish Hardwood Cane

Brown Fish Hardwood Cane
The Brown Fish Hardwood Cane is an incredibly eye-catching walking stick that comes with a charming fish in place of the handle. Beautifully designed, elegant and durable, this cane is a collectors' favourite and frequently purchased as a birthday or Christmas present.

Charming Fish Handle
This charming collector's walking stick features a carefully detailed brown fish, mounted on a durable hardwood shaft. The handle is made from a tough acetate, perfectly smooth and very comfortable to grip.

Durable Hardwood Shaft
The cleverly designed handle is mounted on a brown, hardwood* shaft, fitted with a metal ferrule and a smart metal collar. Hardwoods are known to be tough and highly resilient, perfect for making reliable walking sticks.

Metal Collar and Ferrule
To complete the charming appearance of this novelty cane, the shaft is fitted with a smart metal collar and a metal ferrule. The smart collar perfectly matches the formal appearance of the cane, while the dark-coloured ferrule is incredibly discreet and practically unnoticeable on the dark brown shaft.

Novelty Canes
Inspired by the collector’s canes of the Victorian and Edwardian eras (19th and early 20th centuries), many novelty walking sticks are bought as presents and by collectors of walking sticks (ambulists). Handle designs include depictions of animals, birds and famous people among many other inspirations. Not generally suitable for orthopaedic use, these are canes to be enjoyed as elegant and amusing fashion statements.

Specifications of the Brown Fish Hardwood Cane
Colour: Brown
Overall height: 92cm (36")
Handle type: Novelty
Handle material: Acetate
Product weight: 345g
Shaft material: Hardwood*
Shaft type: Fixed
Ferrule material: Metal
Ferrule diameter: 19mm
*The type of hardwood used depends on current availability of wood.

Please note that this cane is suitable for use as an accessory on formal occasions, but should not be used for everyday support.

Brown Hare Hardwood Cane

Brown Hare Hardwood Cane
The beautifully crafted Brown Hare Hardwood Cane is perfect for all collectors and suitable for use as an accessory on all formal occasions. The highly detailed handle, featuring a brown hare's head, is mounted on a durable shaft that has been fitted with a smart collar for an elegant look.

Brown Hare Handle
This classic character cane features an elegant hare's head in brown. The handle is made from a tough acetate, allowing for a high degree of detail, and mounted on a brown hardwood shaft.

Durable Hardwood Shaft
The cleverly designed handle is mounted on a brown, hardwood* shaft, fitted with a metal ferrule and a smart metal collar. Hardwoods are known to be tough and highly resilient, perfect for making reliable walking sticks.

Metal Collar and Ferrule
To complete the charming appearance of this novelty cane, the shaft is fitted with a smart metal collar and a metal ferrule. The smart collar perfectly matches the formal appearance of the cane, while the dark-coloured ferrule is incredibly discreet and practically unnoticeable on the dark brown shaft.

Novelty Canes
Inspired by the collector’s canes of the Victorian and Edwardian eras (19th and early 20th centuries), many novelty walking sticks are bought as presents and by collectors of walking sticks (ambulists). Handle designs include depictions of animals, birds and famous people among many other inspirations. Not generally suitable for orthopaedic use, these are canes to be enjoyed as elegant and amusing fashion statements.

Specifications of the Brown Hare Hardwood Cane
Colour: Brown
Overall height: 92cm (36")
Handle type: Novelty
Handle material: Acetate
Product weight: 390g
Shaft material: Hardwood*
Shaft type: Fixed
Ferrule material: Metal
Ferrule diameter: 19mm
*The type of hardwood used depends on current availability of wood.

Please note that this cane is suitable for use as an accessory on formal occasions, but should not be used for everyday support.

Derby Extending Chrome Cane with Patterned Handle

Derby Extending Chrome Cane with Patterned Handle
Who says elegant formal canes can't be practical as well? The Derby Extending Chrome Cane with Patterned Handle features a gorgeous embossed handle, mounted on an elegant black shaft that is both sturdy and height adjustable.

Beautiful and Comfortable Handle
The chrome-plated crutch handle is very comfortable to the hand, as it supports the user's weight directly above the shaft of the stick. This beautiful silver handle has been decorated with a naturalistic embossed pattern.

Adjustable Aluminium Shaft
The shaft is made from aluminium, painted black and fitted with a non-slip black rubber ferrule. The height can easily be adjusted between 77cm and 102cm (30" - 40"), making it suitable for a very wide range of users.

Practical Non-Slip Ferrule
The height adjustable shaft can be fitted with a non-slip rubber ferrule that makes the cane safe to use on all hard surfaces. The colour of the ferrule perfectly matches that of the shaft, making it as discreet as possible.

Specifications of the Derby Extending Chrome Cane
Colour: Black with silver handle
Handle type: Crutch
Handle material: Chrome
Product weight: 320g
Shaft material: Aluminium
Shaft type: Height adjustable
Ferrule material: Metal
Ferrule diameter: 16mm

Drive Medical Blue Crackle Swan Neck Walking Stick with Soft Grip Handle

VAT Relief
Drive Medical Blue Crackle Swan Neck Walking Stick with Soft Grip Handle
When you use a mobility aid, your level of comfort doesn't just depend on how much support the stick can provide you; it's also dependent on whether the stick's design suits you. The Drive Medical Blue Crackle Swan Neck Walking Stick with Soft Grip Handle has a dark blue and black shaft that suits a wide range of people. The stick also offers excellent stability as a result of its offset handle and sturdy rubber ferrule.

As the Drive Medical Walking Stick is constructed with an offset handle, it transmits your weight centrally through the stick to prevent any unsteadiness. This helps reduce the number of falls you suffer from.

Key Information for the Offset Mobility Aid
Ideal if you're unstable on your feet
Suited for those who place a lot of weight on their stick
Shaft is angled to transmit your weight centrally for improved stability
Constructed from sturdy but lightweight 2.5cm (1") aluminium tubing
Ergonomically designed handle with soft grip
Handle reduces stress and fatigue in your hand
Adjustable in height with push buttons
Includes wrist strap to prevent stick from falling
Sturdy rubber ferrule provides good traction
Metallic surfaces are easy to wipe clean
Who Should Use the Support?
If you're unsteady on your feet, the Drive Medical's Blue Crackle Aid has been created specifically for you. The walking stick is perfect for those who place a great deal of weight on their mobility aid as its practical features help keep you stable.

Unlike traditional walking sticks, the Swan Neck Walking Stick is adjustable in height. You can alter its height by using the stick's push buttons located halfway up its shaft. This feature allows the cane to be used by a range of different people so you get the support you require.

Technical Specifications
Handle height: 72 - 98cm (28.5 - 38.5")
Maximum weight capacity: 135kg (21 stone)

Height-Adjustable Stick Seat

Height-Adjustable Stick Seat
The Height-Adjustable Stick Seat is a combined walking stick and foldable seat. It is ideal for taking on walks or to outdoor events, and can be transformed from one form to another with ease.

Key Features
Aluminium and plastic construction is lightweight and easy to carry
Corrosion resistance improves longevity for improved use
Handle can be adjusted in height for maximum comfort
Three-legged seat provides a stable support when rest is required
Ideal for anybody who would feel the benefit of a walking aid while out and about
Suitable for taking to festivals and outdoor events where seating may be minimal
Supportive Design
The Height-Adjustable Stick Seat is ideal for providing support both while seated and walking around. It can be used as a walking stick to support the individual, and the handle can be adjusted in height from between 845mm to 950mm to ensure it is positioned comfortably for the user.

When utilised as a portable seat, the stick seat can be used in a stable position with the handle section between the user's legs, and the other two legs positioned at the back. The seat height can also be adjusted from 455mm to 540mm, ensuring suitable rest can be provided when it is needed most.

Easy to Carry
As the aluminium and plastic construction of this stick seat is lightweight, it makes it easy to carry around. When used as a walking stick it can provide the individual with reliable support while walking. It can also be carried around for instant transformation when rest is required.

Versatile Use
The Height-Adjustable Stick Seat is ideal for anybody who would benefit from a walking aid. The stick can support the user while strolling, and can then be unfolded to provide a seat should rest be required.

It is also ideal for taking to events such as festivals and outdoor theatre shows, where seating provided may be minimal. This way there will be no need to sit down on uncomfortable and even damp or dewy grass, as the stick seat can provide comfortable seating in an instant.

Technical Specifications
Maximum user weight: 100kg (15.75 stone)
Weight: 900g
Handle height: 845 - 950mm
Seat height: 455 - 540mm

Shooting Stick with Brown Seat

Shooting Stick with Brown Seat
Outdoor events and pursuits bring joy to the lives of many, and having reduced mobility needn't mean you should miss out. The timeless shooting stick design combines a walking stick with a folding chair, helping you to get around but also allowing you to grab a rest when needed.

The Shooting Stick with Brown Seat features a sturdy stainless steel shaft with a comfortable brown seat. Ideal for outdoor events, it offers sturdy support in both the stand-up and seated positions.

Key Information
Height: Adjustable from 28" to 37" (71 - 94cm)
Shaft Colour: Grey
Shaft Pattern: Plain
Shaft Material: Stainless Steel
Handle Style: Seat
Handle Pattern: Plain
Handle Colour: Brown
Ferrule Style: Spiked with ground plate
Seat Length: 5" (13cm)
Seat Width: 16" (41cm)
Weight: 1kg
Comfortable Seat
Made from soft yet durable materials, the seat is comfortable to sit on and will accommodate most individuals. This can prove invaluable for outdoor performances or spectator sports where seating is limited.

Practical Ferrule
The Shooting Stick with Brown Seat is supplied with a practical spike ferrule with ground plate. The spike digs into the ground to provide superb grip on soft surfaces, while the ground plate supplies balance and prevents the spike from sliding too far into the ground.

Adjustable Black Foldaway Flipstick Seat Stick

Adjustable Black Foldaway Flipstick Seat Stick
While non-folding seat sticks are still useful, if you don't need to use your mobility aid all the time, they can become too heavy to carry. The Adjustable Black Foldaway Flipstick Seat Stick provides you with an excellent alternative. Its folding design allows you to store the support in the supplied black bag when it isn't in use, which is particularly useful if you spend a great deal of time travelling in a car or aeroplane.

Practical Mobility Device
Created to be as lightweight, hard wearing and practical as possible, the Black Foldaway Seat Stick provides you with a fantastic alternative to a traditional mobility aid. The support has an easily-operated mechanism so the handle can be "flipped" into a horizontal position quickly. This allows you to get the rest you need as soon as you need it.

Plastic Seat
With its black plastic seat, the Foldaway Flipstick Seat Stick provides you with excellent comfort and support. Please note that its single leg means it should be used by those who are more active and steady on their feet.

Dark Black Leg
The Adjustable Black Seat Stick has an aluminium leg that provides you with excellent stability and support. The support is able to carry a maximum user weight of around 20 stone (130kg).

Designed to fold into four sections, the Black Foldaway Flipstick Seat is perfect for those who don't need to use their support all the time when they're outside. Plus, with its matching black bag and convenient carrying straps, the support can be folded away and carried around in the bag when it isn't required.

Sizing of the Adjustable Walking Aid
This Foldaway Flipstick Seat Stick's leg is adjustable in height from 87cm to 93cm (approximately 34" to 36.5") while its seat height is alterable from 77cm to 84cm (approximately 30" to 33"). These alterable features mean it's an excellent support for a wide range of users.

Technical Specifications
Colour: Black
Seat material: Plastic
Product weight: 660g
Leg type: Mono, folding and height adjustable
Leg material: Aluminium
Ferrule diameter: 22mm
Ferrule material: Rubber

Adjustable Black Promenade Walking Seat Stick with Interchangeable Rubber or Spiked Ferrule

Adjustable Black Promenade Walking Seat Stick with Interchangeable Rubber or Spiked Ferrule
When you spend a great deal of time in town and in country, it's important that you find a mobility aid that can be used in both settings. The Adjustable Black Promenade Walking Seat Stick with Interchangeable Rubber or Spiked Ferrule has a convenient interchangeable rubber and point-and-plate ferrule system that allows the support to be used on either hard or soft surfaces.

Classically-Styled Seat Stick
A classically-styled seat stick, the Adjustable Black Seat Stick is a practical yet beautiful addition to any wardrobe. The mobility aid's black design means it won't look out of place in a number of settings, whether you're in town or in the country.

Leather Seat and Handles
Created with a black leather seat and handles, the support is a classy accessory that can be worn with confidence. The Promenade Walking Stick's black design is continued with its painted black stainless steel leg.

The support's one-legged design is suited for those who don't suffer from dizziness or instability. This is particularly true if you will be using the mobility aid as a seat occasionally.

Painted Leg
Designed with a stainless steel inner shaft, the Adjustable Promenade Seat Stick provides you with excellent support. This mobility aid has a convenient interchangeable rubber and point-and-plate ferrule so you can use it on hard or soft surfaces.

Size Guide for the Promenade Mobility Aid
This Black Promenade Seat Stick's shaft is adjustable in walking height in a series of increments between 77cm and 97cm (approximately 30" to 38") and sitting height between 61cm and 81cm (approximately 24" to 31"). This makes the support ideal for those who aren't sure how tall their support should be.

Weighing just 1090 grams, the support won't feel too heavy in your grip. Please note the recommended user weight limit is approximately 16 stone (100kg).

Technical Specifications
Colour: Black
Seat material: Leather
Product weight: 1090g
Shaft type: Height adjustable
Shaft material: Stainless steel
Ferrule material: Rubber

Adjustable Folding Black Anatomical Walking Stick

Adjustable Folding Black Anatomical Walking Stick
The Adjustable Folding Black Anatomical Walking Stick combines reliability with convenience by offering a sturdy support with an adjustable height. It features an anatomical handle for improved comfort, and the stick can also be folded into a compact size for easier transportation.

The walking stick is available for both the left and the right hand. Please select your desired option from the drop-down menu at the top of the page.

Key Features
Height adjustable between 32 - 36" for comfort
Folds into four sections for ease of transportation
Strong yet lightweight aluminium walking stick is not cumbersome to carry
Anatomical handle is comfortable to hold for improved gripping
Ferrule helps to absorb impact with the ground while improving steadiness of use
Wrist cord is included to reduce the risk of the stick falling to the ground
Made with a classy black design to match every outfit
Adjustable Height
The Folding Walking Stick offers an adjustable height of between 32" and 36". This height can be altered with the simple touch of a button and pulling up or pushing down the stick accordingly, before clicking the button securely into place.

Not only does this mean that the stick can be adjusted to a height that is comfortable for the individual, but it also enables it to suit the needs of multiple users over time, for example if it is used as a temporary mobility aid in a care environment.

Folding Design
With the ability to be folded down into four sections, the Height-Adjustable Anatomical Walking Stick can be altered from its standard vertical design to a more compact size. This will be particularly ideal for storing in luggage for when travelling, ensuring the walking stick does not need to be left behind when commuting or on holiday.

The ability to fold the stick away also makes it a great option for anybody with varying mobility needs. If a walking stick is only required at certain times, for example when taking a short walk after using a mobility scooter, the stick can be stored in a basket or similar storage facility so that gentle strolls and exercise can be taken when required.

Reliable and Comfortable to Use
The Folding Anatomical Walking Stick is constructed from strong yet lightweight aluminium, meaning it provides reliable and sturdy support to the individual without being too cumbersome to carry around. It features an anatomical handle that can be purchased to fit the right or the left hand, and this improves comfort of gripping, ideal for using the walking stick for extended periods.

The ferrule absorbs impact with the ground and helps to improve stability, and the inclusion of a wrist cord means that the stick can be hooked to the wrist at all times to prevent it from falling to the ground and thus eliminating the need to bend down to retrieve it.

Adjustable Geometric Patterned Derby Handle Walking Stick
The Adjustable Geometric Patterned Derby Handle Walking Stick combines reliability with convenience by offering a sturdy support with an adjustable height. It is provided in a fun and stylish design, and includes a rubber ferrule and wrist strap for improved use.

Key Features
Adjustable height of between 28.5" and 37.5" to provide comfortable use for most individuals
Strong yet lightweight aluminium walking stick is not cumbersome to carry
Wooden Derby handle is comfortable to hold for improved gripping
Ferrule helps to absorb impact with the ground while improving steadiness of use
Wrist cord is included to reduce the risk of the stick falling to the ground
Attractive geometric design on the shaft for visual appeal
Adjustable Height
The walking stick offers an adjustable height of between 28.5" and 37.5", and can be altered with the simple touch of a button and pulling up or pushing down the stick accordingly, before clicking the button securely into place. Using a stick of a suitable height for the individual is paramount for ensuring comfort, safety, and a healthier posture.

Reliable Aluminium Shaft
The shaft of the walking stick is made from aluminium. This provides a sturdy stick that will be ideal for providing reliable mobility support. The stick is also strong yet lightweight, meaning it provides reliable support to the individual without being too cumbersome to carry around.

Comfortable to Use
The walking stick features a wooden handle in a Derby style, which is comfortable to hold onto, ideal for using the walking stick for extended periods. The ferrule absorbs impact with the ground and helps to improve stability, and the inclusion of a wrist cord means that the stick can be hooked to the wrist at all times to prevent it from falling to the ground and thus eliminating the need to bend down to retrieve it.

Geometric Design
The attractive geometric design is featured on both the shaft and the handle. This adds a touch of style to the walking stick, providing an attractive design from top to toe. The visual appeal of the stick also lends itself as a great birthday or Christmas gift for a loved one, providing them with the mobility support they may require without compromise to style.

Ash Shepherd's Crook Walking Stick (4' 6)

Ash Shepherd's Crook Walking Stick (4' 6")
The Ash Shepherd's Crook Walking Stick (4' 6") is a robust crook stick suitable both for farmers and as a walking aid. The crook handle is ideal for gathering livestock, and the robust ash construction and metal ferrule provide effective mobility support.

Ash Wood Construction
The Crook Walking Stick has been constructed from ash. Ash wood is very strong and reliable, allowing it to effectively support the user while walking or standing. Ash is also a wood with good elasticity, providing the stick with improved comfort of use without decreasing its reliability.

The walking stick has an approximate height of 4' 6" (138cm). This makes it a comfortable height for most individuals.

Crook Handle
The crook handle is comfortable to hold onto, with a smooth curved shape around which the palm of the hand can be comfortably clasped. This crook handle also makes the walking stick easier to store by enabling it to be hooked over a convenient location. This can also reduce the risk of the stick falling to the ground, thus reducing any need to bend down to retrieve it.

Ideal as a Walking Aid
Combining a strong and sturdy construction with a metal ferrule at the base, the Shepherd's Crook Walking Stick is ideal as a walking aid. The reliable stick can provide mobility support for individuals who would benefit from help with steadiness while walking.

The metal ferrule also helps to protect the stick, both making it more safe to use and increasing the longevity of the wooden stick. It helps to protect the base of the stick from any knocks whenever it strikes the ground, ensuring that the ash wood stick does not need to come into direct contract with solid terrains.

Great for Farmers
The crook handle is a natural choice for farmers when gathering stock. The curved handle can easily be hooked around the neck of an animal, such as a sheep, to herd them in the right direction. When not used for gathering animals, it can also provide farmers with mobility support when crossing muddy or uneven grounds.

Black Cocker Spaniel Hardwood Cane

Black Cocker Spaniel Hardwood Cane
The Black Cocker Spaniel Hardwood Cane is a must-have for all collectors and lovers of unusual walking sticks. Its highly detailed handle, featuring a head of a cocker spaniel, is made from a tough resin, while the elegant shaft is made from durable hardwood and fitted with a metal ferrule and a smart metal collar.

Cocker Spaniel Handle
This elegant collector's cane features a realistic head of a cocker spaniel. The black head is made from a tough resin that allows for a high degree of detail, and mounted on a brown hardwood shaft.

Durable Hardwood Shaft
The cleverly designed handle is mounted on a brown, hardwood* shaft, fitted with a metal ferrule and a smart metal collar. Hardwoods are known to be tough and highly resilient, perfect for making reliable walking sticks.

Metal Collar and Ferrule
To complete the charming appearance of this novelty cane, the shaft is fitted with a smart metal collar and a metal ferrule. The smart collar perfectly matches the formal appearance of the cane, while the dark-coloured ferrule is incredibly discreet and practically unnoticeable on the dark brown shaft.

Novelty Canes
Inspired by the collector’s canes of the Victorian and Edwardian eras (19th and early 20th centuries), many novelty walking sticks are bought as presents and by collectors of walking sticks (ambulists). Handle designs include depictions of animals, birds and famous people among many other inspirations. Not generally suitable for orthopaedic use, these are canes to be enjoyed as elegant and amusing fashion statements.

Specifications of the Black Cocker Spaniel Hardwood Cane
Colour: Brown
Overall height: 92cm (36")
Handle type: Novelty
Handle material: Resin
Product weight: 375g
Shaft material: Hardwood
Shaft type: Fixed
Ferrule material: Metal
Ferrule diameter: 19mm
*The type of hardwood used depends on current availability of wood.

Please note that this cane is suitable for use as an accessory on formal occasions, but should not be used for everyday support.

Black Crutch-Handle Adjustable Walking Stick Umbrella

Black Crutch-Handle Adjustable Walking Stick Umbrella
The Black Crutch-Handle Adjustable Walking Stick Umbrella combines an umbrella and a walking stick in one. This makes it ideal for anybody with reduced mobility who often finds it necessary to choose between taking either an umbrella or a walking stick, ensuring that nobody need fall victim to the weather should a rain shower strike when out and about.

Combined Umbrella and Walking Stick
When using a walking stick, at least one hand is required for using the cane, or both in circumstances where two sticks or canes are required for full assistance with stability. In either case, carrying an umbrella as a precautionary measure alongside a walking stick can be a great challenge.

With the Walking Stick Umbrella, the need to decide between mobility support or protection from the rain has been eradicated. Should it start to rain when you're out and about, the walking stick can transform into an umbrella with ease, ensuring that you can remain dry while waiting for the rain to stop so you can be on your way again.

Adjustable Shaft
In order to be as suitable for as many individuals as possible, the shaft of the umbrella has been constructed with the ability to adjust the length. The length can range from 32.5" to 36" (82cm to 91cm), ensuring that it can be positioned comfortably, whether used as a walking stick or as an umbrella.

Soft-Feel Crutch Handle
When the Walking Stick Umbrella is used as an umbrella, the crutch handle is comfortable to hold onto. This will help reduce the strain of having to hold up an umbrella for any length of time, with a shape around which the palm and fingers can comfortably grasp.

The crutch handle is also designed to bear more weight than many other, more traditional umbrella handles. It is strong enough for most individuals to lean onto the handle for support, providing an effective walking stick and umbrella combined.

Rubber Ferrule
A rubber ferrule is located at the base of the walking stick. This helps to protect the stick, and in turn increases the longevity by taking the majority of the force whenever the stick strikes against the solid ground. This can also help to make the stick more comfortable to use, allowing it to be utilised by a wide range of people as both a walking stick and as an umbrella.

Brass Crown Handle Boxwood Collectors' Walking Stick

Brass Crown Handle Boxwood Collectors' Walking Stick
The Brass Crown Handle Boxwood Collectors' Walking Stick is a decorative walking stick with a boxwood shaft and brass handle. Although it is not suitable for use as a medical aid, it is a perfect accessory for complementing formal attire when attending events or special occasions.

Key Features
Stylish design is ideal for collectors of walking sticks
Boxwood shaft provides an elegant appearance
Brass crown handle fits comfortably into the palm of the hand
Rubber ferrule protects the base of the shaft when striking the ground
Height of 36" (91cm) is ideal for most individuals
Decorative Walking Stick
The sole purpose of the Boxwood Collectors' Walking Stick is to look appealing. Although it is not suitable for supporting the weight of the individual or providing any mobility assistance, it is ideal as a decorative accessory.

Whether you're attending a formal gathering, celebrating a special occasion, or simply looking for a cane to complete your attire, this Brass Crown Handle Walking Stick is perfect for the job.

Attractive Design
The Collectors' Walking Stick combines boxwood and brass in one design to create a visually stunning collectible walking stick. The boxwood shaft is sleek and stylish, and the patterned brass handle finishes off the appearance with a touch of elegance, while also fitting comfortably in the palm of the hand.

With a height of 36" (91cm), it will be an ideal accessory for most individuals, and may be paired with any smart or formal attire to complete the look.

Rubber Ferrule
When carrying the walking stick around, whether to an event or while taking a stroll, the stick may come into contact with the ground. A rubber ferrule has been included to protect the shaft whenever the stick strikes against the ground, increasing the longevity of the stick.

Ideal as a Gift
With a stylish and classy design, the Brass Crown Handle Boxwood Collectors' Walking Stick will make an ideal gift. Whether you wish to gift it as a birthday or Christmas present, or simply as a token of appreciation, it is one walking stick that may put a smile on any individual or collector of walking sticks.

Please note that the Brass Crown Handle Boxwood Collectors' Walking Stick is not suitable as a medical aid, and should not be used to support the weight of the user.

Brown Boot Novelty Walking Cane

Brown Boot Novelty Walking Cane
If you're a collector and love novel-looking walking sticks, finding interesting canes is an exciting process. The Brown Boot Novelty Walking Cane has major appeal for collectors and even those in search of an unusual talking point. Whether the cane will be joining a wide range of novel canes you already own or this will be the first stick you purchase, this cane is sure to turn heads!

Unusual Talking Point
This Novelty Walking Cane has an unusual design that's sure to start a number of conversations at the next event you attend. The handle has been created with intricate features that distinguish it as an upside down boot. Owing to its brown design and elegant but unusual style, the cane would be excellent to use in formal occasions like evening events, horse racing, and many more.

Lace-Up Boot Handle
The Brown Walking Cane has a lace-up boot handle that has been made from durable acetate. This helps ensure the handle's design remains intact throughout use.

Brown Beech Wood Shaft
With its brown beech wood shaft, the Novelty Boot Cane has an appealing classic design. The cane has also been fitted with a brass collar that adds to its elegant style, as well as a discreet rubber ferrule to safeguard against slips and falls.

Sizing of the Brown Walking Stick
With its overall fixed height of 92cm, the Brown Boot Walking Stick is the perfect height for most gentlemen. As the cane's shaft is made from beech wood, it can be cut down to size if necessary.

Technical Specifications
Colour: Brown
Handle type: Novelty
Handle material: Acetate
Product weight: 410g
Shaft material: Beech wood
Shaft type: Fixed
Ferrule material: Rubber
Ferrule diameter: 19mm
Please note that this Brown Boot Novelty Walking Cane is not suitable for use as a mobility aid but is instead a novelty accessory.

Drive Medical Red Aluminium Paediatric Forearm Crutches

VAT Relief
Drive Medical Red Aluminium Paediatric Forearm Crutches
When your child has sustained an injury to their leg, it's important that they use crutches to reduce impact on the area. The Drive Medical Red Aluminium Paediatric Forearm Crutches assist with the mobility of children who can partially bear their weight on their injured leg. Constructed with sturdy and durable aluminium shafts, the crutches will provide your child with excellent support and stability.

Features and Benefits
Made specifically for children
Assists with mobility for those who can partially bear their weight
Shaft is made from sturdy and durable aluminium
Light in weight and easy to carry
Shaft and cuff heights are easy to adjust
Shaft and cuff heights adjust independently from one another
Buttons are easy to push so you can adjust crutches' height quickly
Adjustable height allows your child to get an excellent fit
One-piece, latex-free moulded plastic cuff and hand grip
Cuff and hand grip provides additional safety, comfort and durability
Extra-large, slip-resistant tips provide added stability
All surfaces are easy to wipe clean
Supplied in pairs
Spirit red in colour
Adjustable Height
Both the shafts and the cuffs of the Red Aluminium Forearm Crutches independently adjust in height with easy-to-push buttons. This helps ensure the aids provide your child with a tailored fit for optimal comfort and support.

Spirit-Red Colour
Most crutches are silver and clinical in design, but using these is sure to make any child miserable. Designed specifically for children, the Drive Medical Paediatric Forearm Crutches are a beautiful spirit red in colour. This allows your child to use their crutches proudly and without embarrassment.

Technical Specifications
Hand grip height: 36 - 53cm (14 - 21")
Cuff to hand grip: 16 - 22cm (6 - 9")
User height: 97 - 137cm (3'2 - 4'6")
Maximum weight capacity: 127kg (20 stone)

Duck's Head Collectors' Walking Stick

Duck's Head Collectors' Walking Stick
The Duck's Head Collectors' Walking Stick is a fun and attractive collectors' stick ideal for collectors, country dwellers, and animal lovers alike. It features a moulded resin handle in the shape of a duck's head, as well as a stylish turned stained beech shaft to give it an elegant appearance.

Please note that this walking stick is for decorative use only, and is not suitable as a medical aid or for providing mobility support.

Novelty Duck's Head Handle
The handle of the Collectors' Walking Stick takes centre of attention, with its duck's head moulded from resin. This novelty design provides a touch of fun and individuality to the walking stick, making it ideal for country dwellers and collectors of canes alike.

Turned Stained Beech Shaft
The shaft of the walking stick has a length of 36" (91cm), making it a great standard length for most individuals. It has been constructed from turned beech wood, which has then been stained to provide an attractive finish.

This stained coating also helps to protect the wood from damage, improving both the appearance of and safety for the walking stick. It is finished off with a brass collar to complete the elegant design.

Ideal for Special Occasions
Although the Duck's Head Walking Stick is not suitable as a mobility aid, it is a great accessory that will complement any outfit during special occasions. Whether attending a birthday party, visiting the theatre, or taking a leisurely stroll in the park, this Collectors' Walking Stick is an ideal choice for adding a touch of style and decoration to your outfit.

Great as a Gift Idea
The fun appearance of the Duck's Head Collectors' Walking Stick ideally lends itself as a great gift idea. Gifting the walking stick to collectors of canes or to animal lovers will not only show that you are in tune with their personal interests and hobbies, but it will also put a smile on their face by presenting them with a touch of fun and style with this novelty collectors' cane.

Transparent Tray for the Action 3 Junior Children's Wheelchair

Flip Away Half Lap Wheelchair Tray

Homecraft Stay Tray with Bean Bag

Special Tomato Mobile Activity Tray

SKM Easystore Standard Wheelchair Therapy Table

Single Drink Holder

Tumble Forms 2 Mobile Base

Trabasack Laptray Bag

SciFit PRO2 Total Body Exerciser

Ropox Ergo 2-Section LH Tilt Table

Ropox Ergo Multi-Table

Designed in conjunction with the Bobath Centre, Ropox Ergo Multi-Table is ideal for training situations where the user and therapist need to be sat opposite but close together, making it suitable to use for all sorts of activities, including teaching and rehabilitation. The table is manually height adjusted to suit the needs of the individual, and features no cross bars so that wheelchair users can have close and easy access.

How Can the Ergo Multi-Table Be Used?

The table can be used in training situations when the user and therapist need to be sat faced opposite each other, which is where the cut outs come in handy for ease and comfort. In situations where both parties need to be sat on the same side of the table, the cut-outs provide support and a fully flat surface to work on.

Wheelchair users also have the ability to draw themselves closely to the table, as it has no inconvenient braces or crossbars.

Fully Adjustable to Suit Needs

The Ergo Multi-Table is manually height adjustable from 56 - 90cm by means of a detachable, winding handle. The table comprises a of boomerang system which allows easy change of the cut out sizes between 30-40cm diameter or using the half moon to completely fill the cut out.

Specifications of the Ropox Ergo Multi-Table

• Colour: Grey
• Maximum load capacity: 100kg (16st)
• Width: 90cm (35")
• Inner width: 73.6cm (30")
• Depth: 70cm (27.5")
• Height adjustment: 56 - 90cm (22 - 35")

SciFit PRO1 Upper Body Exerciser

Polar H10 Heart Rate Monitor with Bluetooth & ANT+ Connectivity and Pro Chest Strap, for Running, Cycling, Swimming, Gym, High Intensity Sports

• High Accuracy: Widely recognized for its top precision by many sources, Polar H10 is the most accurate heart rate sensor in Polar’s history. Polar H10 provides top quality ECG measurement and it's the choice of many pro athletes
• Connectivity: Bluetooth, ANT+ and 5 kHz provide an excellent variety of connection options (e.g. with Peloton). You can use Bluetooth and ANT+ connections simultaneously as well as two Bluetooth connections simultaneously
• Polar Pro Chest Strap: With improved electrodes, an easy-to-use buckle and silicone dots, the strap is comfortable and interference-free, and stays put when you're on the move
• Versatility: Wear Polar HR monitor when rowing, cycling, running, training indoors or swimming. Polar H10 is fully waterproof and it has internal memory for one training session
• Software Updates: Via Polar Beat app. Polar HRM works with many sports and smart watches (Polar, Garmin, Apple, Suunto, etc.), Polar Beat and many other fitness apps such as Strava and Nike

Monark 881E Rehab Trainer

The Monark 881E Rehab Trainer ergometer can be used for both arms and /or legs in physical therapy, in hospital, rehabilitation facilities and at and home. It provides the potential to individually tailor exercises and adjust exercise intensity. Ideal for exercise from a wheel chair.

Smartsigns LitePlus SL600 N Vital Signs Monitor (BP Only)

Huntleigh smartsigns LitePlus Vital Signs Monitor

The smartsigns LitePlus is a powerful yet cost-effective portable vital signs monitor which can be used in a variety of clinical settings. From simple SpO2 measurements to more complex long-term monitoring, the flexibility of the smartsigns LitePlus meets these challenges.

The LitePlus system is available in a number of configurations to monitor:

• Non Invasive Blood Pressure (NIBP) and Pulse Rate (W9570)
• NIBP, Pulse Rate and Temperature (W9571)
• NIBP, Pulse Rate and SpO2 (W9572)
• NIBP, Pulse Rate, Temperature and SpO2 (W9573)

Features

• Easy to use operating interface
• Large, coloured high-visibility displays
• Full function alarms
• Internal memory for up to 200 measurements
• Smart user interface with tactile buttons