Injection & Infusion

Bristol Maid High Capacity Four Hook Infusion Pump Stand

When using an IV drip in a professional medical scenario, ensuring your infusion stand is reliable and sturdy is crucial to providing quality patient care. The Bristol Maid High Capacity Four Hook Infusion Pump Stand is specifically designed to hold blood warmers or pumps and is stable enough to be depended on through a number of medical scenarios.

Stable and Sturdy
This infusion stand meets appendix A (Stability Requirements) of BS 3619:1976 Mobile Infusion Stands, so medical professionals can be sure that it will work right when it's needed most. With a five leg design, and a low centre of gravity to assist stability, it has been specially designed for unrivalled sturdiness. The heavy duty steel base with seamless polyurethane over-moulding provides a flexible finish that is both wear and tear, and water resistant.

The steel base also provides impact protection to the fabric of the building, ensuring it doesn't cause unnecessary damage to its surroundings. Additionally, the fully welded construction features a 50mm diameter scratch resistant stainless steel upright, and 25mm diameter pump support bows.

Safe and Hygienic
Defined edges and contours make sure that all key surfaces are accessible, allowing for easy and effective cleaning, including steam cleaning. Five heavy duty 75mm twin wheel castors are shielded from fluid, making this stand fully mobile. Finally, the pole is height adjustable using a heavy duty hand wheel, so it will always be where you need it, when you need it.

Please note: Pumps are not included

Key Features
Sturdy and reliable infusion stand
Meets Appendix A of BS 3619:1976
Designed to hold blood warmers and pumps
Five leg design with low centre of gravity ensures stability
Heavy duty steel base with polyurethane over-moulding
Flexible wear and tear, and water resistant finish
Provides impact protection to the fabric of the building
Edges and contours ensure all key surfaces are accessible
Easy to clean for superior hygiene
Fully welded construction with 50mm diameter stainless steel upright
25mm diameter pump supports bows
Polymer heavy duty 75mm twin wheel castors
One antistatic castor
Compatible with steam cleaning
Four U shaped hooks
Height adjustable using handwheel (1300 - 2000mm)
Suitable for use with four infusion pumps
Maximum recommended load:
12kg on hooks plus 12kg on upright

Bristol Maid Two-Hook Knockdown Infusion Stand

Providing durability and convenience, the Bristol Maid Two-Hook Knockdown Infusion Stand is supplied for simple self assembly. Fitted with castors and offering an adjustable height, the Knockdown Infusion Stand is a practical option for holding and transporting infusion bags.

Assembling the Knockdown Infusion Stand
Offering a unique design, the Knockdown Infusion Stand enables simple self assembly. The kit is provided ready for self assembly, and is easily built with the use of an allen key, which is used to secure the legs and upright stand into position.

Packed for self assembly also means that the Infusion Stand can be erected when it is required, and will be easier to store until it is ready to be assembled.

Adjustability and Versatility

Offering an adjustable pole, the height of the Knockdown Infusion Stand can be altered from between 1270 - 2000mm. This is adjusted through the convenient use of a handwheel, enabling a more suitable height depending on the requirements of both the patients and the infusion bags.

The Knockdown Infusion Stand comes with two pigtail-style hooks, onto which infusion bags can be securely attached. The maximum load is 4kg per stand, and the use of an infusion pump is not recommended with this model.

Transporting the Infusion Stand
The inclusion of five 50mm castors increases the mobility of the Infusion Stand once assembled. This is practical for transporting the stand from one room to another, and will also prevent patients from forced staticity when using an infusion bag.

With an anti-static castor preventing the build-up of charge, and one fitted braking castor to stabilise the stand, it offers both safety and security.

Quality and Standards
Constructed from 304-grade stainless steel with a plastic centre boss, the Knockdown Infusion Stand provides a sturdy and durable design. It meets appendix A (Stability Requirements) of the British Standard BS 3619:1976 Mobile Infusion Stand, which ensures that the Infusion Stand is a safe and stable option.

The Knockdown Infusion Stand has also been CE marked, helping to provide peace of mind that it meets legislative requirements.

Technical Specifications of the Knockdown Infusion Stand
Stand and legs: 304-grade stainless steel
Centre boss: plastic
Weighted base colour: Grey
Weight: 3.8kg
Five 50mm castors (one anti-static, one braking)
Height-adjustable pole: 1270 - 2000mm
Packed size (WxDxH): 1230 x 290 x 100mm
Assembled size (WxDxH): 650 x 650 x 1270 - 2000mm

Bristol Maid Four-Hook Mild Steel Infusion Stand with Weighted Base

Providing durability and convenience, the Bristol Maid Four-Hook Mild Steel Infusion Stand with Weighted Base* is a sturdy and stable Infusion Stand. Fitted with castors and offering an adjustable height, the Mild Steel Infusion Stand is a practical option for holding and transporting infusion bags.

Adjustability and Versatility

Fitted with an adjustable pole, the height of the Mild Steel Infusion Stand can be altered from between 1270 - 2000mm. This is adjusted through the convenient use of a handwheel, enabling a more suitable height depending on the requirements of both the patients and the infusion bags.

The Four-Hook Mild Steel Infusion Stand comes with four pigtail-style hooks, onto which infusion bags can be securely attached. The maximum load is 4kg per stand.

Transporting the Infusion Stand
The inclusion of five 50mm anti-static castors increases the mobility of the Infusion Stand. This is practical for transporting the stand from one room to another, and will also prevent patients from forced staticity when using an infusion bag.

The anti-static castors help prevent the build-up of charge, and one fitted braking castor works to stabilise the stand when parked. The addition of a 9kg weighted base also offers increased stability for the stand.

Quality and Standards
Constructed from welded mild steel, the Infusion Stand provides a sturdy and durable design. It meets appendix A (Stability Requirements) of the British Standard BS 3619:1976 Mobile Infusion Stand, which ensures that the Infusion Stand is a safe and stable option.

The Mild Steel Infusion Stand has also been CE marked, helping to provide assurance that it meets legislative requirements.

Technical Specifications of the Mild Steel Infusion Stand
Construction: welded mild steel
Paint colour: white
Weighted base colour: grey
Weight: 12.9kg
Base weight: 9kg
Five anti-static 50mm castors (one braking)
Height-adjustable pole: 1270 - 2000mm
Overall dimensions (WxDxH): 650 x 650 x 1270 - 2000mm
*Please note that the image displayed shows the Two-Hook Mild Steel Infusion Stand (without the weighted base).

Bristol Maid Two-Hook Stainless Steel Infusion Stand with Weighted Base

Providing durability and convenience, the Bristol Maid Two-Hook Stainless Steel Infusion Stand with Weighted Base is a sturdy and stable Infusion Stand. Fitted with castors and offering an adjustable height, the Stainless Steel Infusion Stand is a practical option for holding and transporting infusion bags.

Adjustability and Versatility

Fitted with an adjustable pole, the height of the Stainless Steel Infusion Stand can be altered from between 1270 - 2000mm. This is adjusted through the convenient use of a handwheel, enabling a more suitable height depending on the requirements of both the patients and the infusion bags.

The Two-Hook Stainless Steel Infusion Stand comes with two pigtail-style hooks, onto which infusion bags can be securely attached. The maximum load is 4kg per stand.

Transporting the Infusion Stand
The inclusion of five 50mm anti-static castors increases the mobility of the Infusion Stand. This is practical for transporting the stand from one room to another, and will also prevent patients from forced staticity when using an infusion bag.

The anti-static castors help prevent the build-up of charge, and one fitted braking castor works to stabilise the stand when parked. The addition of a 9kg weighted base also offers increased stability for the stand.

Quality and Standards
Constructed from welded stainless steel, the Infusion Stand provides a sturdy and durable design. It meets appendix A (Stability Requirements) of the British Standard BS 3619:1976 Mobile Infusion Stand, which ensures that the Infusion Stand is a safe and stable option.

The Stainless Steel Infusion Stand has also been CE marked, helping to provide assurance that it meets legislative requirements.

Technical Specifications of the Stainless Steel Infusion Stand
Construction: welded stainless steel
Weight: 12.8kg
Base weight: 9kg
Five anti-static 50mm castors (one braking)
Height-adjustable pole: 1270 - 2000mm
Overall dimensions (WxDxH): 650 x 650 x 1270 - 2000mm
*Please note that the image displayed shows the Two-Hook Stainless Steel Infusion Stand (without the weighted base).

Customer Reviews

Bristol Maid Heavy Duty Two Hook Infusion Stand

The Bristol Maid Heavy Duty Two Hook Infusion Stand is an easy to clean, heavy duty infusion stand. The Bristol Maid Heavy Duty Two Hook Infusion Stand has five leg base with a low centre of gravity to assist with stability of the stand.

The Bristol Maid Heavy Duty Two Hook Infusion Stand has defined edges and contours that ensure that all key surfaces are accessible, allowing for easy & effective cleaning (including steam cleaning).

Features of the Bristol Maid Heavy Duty Two Hook Infusion Stand
Five leg design with low centre of gravity to assist stability
Heavy duty steel base with seamless polyurethane over moulding providing a flexible tear & water resistant finish, along with impact protection to the patient & fabric of the building
Defined edges & contours ensure that all key surfaces are accessible, allowing for easy & effective cleaning (including steam cleaning)
Fully welded construction with 25mm diameter scratch resistant stainless steel upright
Polymer 50mm twin wheel castors shielded from fluid
Height adjustable stainless steel pole using a handwheel (1300 to 2100mm)
Two seamlessly welded pigtail hooks
Maximum load on hooks 4kg (per stand)
Suitable for use with two infusion pumps/syringe drivers
Colour option available
Specifications of the Bristol Maid Heavy Duty Two Hook Infusion Stand
620 x 620 x 1300 - 2100mm
8kg
Standards
Meets appendix A (Stability Requirements) of BS 3619:1976 Mobile Infusion Stands

Bristol Maid Four-Hook Stainless Steel Mobile Infusion Stand

In a professional medical environment, having the proper equipment on hand is crucial to providing consistent, high quality medical care. The Bristol Maid Four-Hook Stainless Steel Mobile Infusion Stand is a versatile, hygienic and stable stand for infusion procedures, allowing doctors and nurses to provide reliable and safe infusions to patients.

Stable and Reliable
When selecting an appropriate infusion stand, stability is perhaps the most important factor to consider. This stand meets appendix A (Stability Requirements) of BS3619:1976 Mobile Infusion stands, so medical professionals can have peace of mind that their infusion procedures are carried out in a safe and responsible manner. The seamlessly welded stainless steel frame is sturdy enough to support infusion bags and equipment, and is easy to clean, allowing for safe, hygienic treatment.

Adjustable and Versatile
To make this infusion stand as versatile and useful as possible, it features a height adjustable pole, which can be manipulated with the use of a handwheel. Height is adjustable from 1270 to 2000mm. The stand is highly mobile, featuring polypropylene 50mm twin wheel castors, one of which is anti-static, for reliable, safe transportation.

Key Features
Stable, hygienic and reliable mobile infusion stand
Complies with Stability Requirements of with BS3619: 1976 Mobile Infusion Stands
Seamlessly welded stainless steel frame
Four sturdy steel pigtail hooks
Max recommended load is 4kg on hooks (per stand)
Height adjustable pole using a handwheel (1270 to 2000mm)
Easy to clean stainless steel finish
Polypropylene 50mm twin wheel castors (1 x anti-static)

Bristol Maid Four-Hook Mild Steel Mobile Infusion Stand

In a professional medical environment, having the proper equipment on hand is crucial to providing consistent, high quality medical care. The Bristol Maid Four-Hook Mild Steel Mobile Infusion Stand is a versatile and stable stand for infusion procedures, allowing doctors and nurses to provide reliable and safe infusions to patients.

Stable and Reliable
When selecting an appropriate infusion stand, stability is perhaps the most important factor to consider. This stand meets appendix A (Stability Requirements) of BS3619: 1976 Mobile Infusion stands, so medical professionals can have peace of mind that their infusion procedures are carried out in a safe and responsible manner. The one-piece mild steel welded frame is sturdy enough to support infusion bags and equipment, and will allow for safe, hygienic treatment.

Adjustable and Versatile
To make this infusion stand as versatile and useful as possible, it features a height adjustable pole, which can be manipulated with the use of a handwheel. Height is adjustable from 1270 to 2000mm. The stand is highly mobile, featuring polypropylene 50mm twin wheel castors, 1 of which is antistatic, for reliable, safe transportation.

Key Features
Stable and reliable mobile infusion stand
Complies with Stability Requirements of with BS3619: 1976 Mobile Infusion Stands
One-piece mild steel welded frame
Four sturdy pigtail hooks
Max recommended load is 4kg on hooks (per stand)
Height adjustable pole using a handwheel (1270 to 2000mm)
Finished in a durable white epoxy polyester powder paint
Polypropylene 50mm twin wheel castors (1 x anti-static)

BD Safety-Lok Blood Collection Set 21g x 0.75" 7" Tubing with Holder x 25

Blue line ultra suctionaid tube with soft-seal cuff and inner cannulae 7.5mm

Supplied as a kit including Blue Line Ultra¨ Suctionaid tracheostomy tube, two inner cannulae, cleaning brush and tracheostomy tube holder.

PRODUCT BENEFITS
Blue Line Ultra¨ Suctionaid tube features an integral suction lumen to aid removal of secretions from above the cuff
Thermosensitive PVC Ð provides sufficient rigidity for initial insertion, and then softens at body temperature to accommodate individual patient anatomy
105¡ angle for comfort in-situ
Tube is suitably radiopaque to enable confirmation of tube position
Soft Seal cuff Ð velvet soft; low pressure, high volume cuff, with larger cuff resting diameter
Clear markings on pilot balloon provide relevant information
Flange is soft and clear
Obturator features special clip design to minimise tube tip movement during insertion

VACUETTE® Tube Holder, Quickshield, Polypropylene, Safety, Short - Pack Of 50

VACUETTE® Tube Holder, Quickshield, Polypropylene, Safety, Short - Pack Of 50

Standard Tube Holder x 100

Standard Tube Holder x 100

DermLite Connection Kit For Phones (iPhone & Android)

iPhone

Finally, you can use the functional power and optical beauty of the DermLite you already know & own to take digital images with your iPhone.

Conveniently, the DermLite iPhone case leaves all iPhone jacks and buttons accessible and is no bulkier than most consumer-grade cases. Add itÕs superior scratch and impact protection to the list of reasons why you can keep it attached to your iPhone all the time, even when you are not doing dermoscopy.

Android

Finally, you can use the functional power and optical beauty of the DermLite you already know & own to take digital images with your Samsung Galaxy device.

Conveniently, the DermLite Galaxy case leaves your deviceÕs jacks and buttons accessible and is no bulkier than most consumer-grade cases. Its superior scratch and impact protection adds to the list of reasons why you can keep it attached to your device all the time, even when you are not doing dermoscopy.

Connection Kits available for the following phones:

iPhone 6+ & 6S+
iPhone 5
iPhone 6
Samsung Galaxy S8
Samsung Galaxy S8+

Disposable Covers for VeinLite EMS x 50

Disposable plastic covers for single use - 50 per packet
Latex Free

Carry Case for VeinLite LED

Carrying case for Veinlite LED¨ with belt clip and pouch for covers

Disposable Covers for VeinLite LEDX x 50

Disposable plastic covers for single use - 50 per packet
Latex Free

Veinlite EMS Pro Carry Case

Leather carrying case for the EMS Pro with belt clip

VeinLite Pedi Skin Transilluminator

Ideal for the NICU or newborn nursery, the Veinlite PEDI¨ is specifically designed for infants and neonates. Powered by one CR2 battery, this smallest and most compact version of the Veinlite LED product line has two switches operating 12 dual colored LEDs for variable light output. A snap-on neonate adapter facilitates through-the-body transillumination.

For Neonates and Infants (not recommended for use on children over 24 months)

Proven Veinlite¨ Technology
Veinlite PEDI is our smallest and most compact version of the clinically proven and very successful Veinlite LED device which was reviewed as "an invaluable new addition to our kits." (Jeffery Lindsey - Journal of Emergency Medical Services 2005)

Invaluable for Vein Access
Take the stress out of finding veins in your smallest patients! The Veinlite PEDI is optimized to find veins using the traditional through-the-body transillumination technique and also by the pantented* side-transillumination method which can be used anywhere on the body, even on the scalp. With the Veinlite PEDI, veins can be mapped to avoid valves or bifurcations and find the best place for safe access. the ingenious C-shaped design helps secure the vein and provides traction on the skin, facilitating easy needle insertion.

Unique C-Shaped Design
With Veinlite PEDI's C-shaped design and 12 light emitting diodes (LEDs) in two colors, superficial veins can be seen and accessed anywhere on the body. No more guess work and no more probing.

Snap-on Neonate Adapter
An innovative adapter** allows six LEDs to shine through a small opening for transillumination through neonate limbs.

Specifications:

Two LED colors optimized for vein imaging
Orange LEDs** (8) for superficial veins
Red LEDs (4) for deeper veins, darker skin
Includes single use barrier covers
Small 3 volts Lithium battery
Weight 40 gm (1.5 oz) with battery
Size 6.7x4.2x2.4 cm
One year warranty
**Patent Pending

Kit includes:

LED Veinlite
12 LEDs in two colors (red and orange)
50 disposable covers
Small 3 volts Lithium battery
Light shield
Neonate adapter

VeinLite LED+ Skin Transilluminator

The newest adult model with optimum viewing area and highest contrast for vein imaging. The wide C-shaped design stretches the skin for easy needle insertion and stops vein from rolling during access. The rechargeable Veinlite LED+ features 28 bright light emitting diodes (LEDs). The 22 bright orange and 6 deep red LEDs can be operated together or separately for maximum versatility and use on patients of all ages and skin tones. With this model there is no need to keep spare batteries in hand.

Fewer IV access failures
Fewer needle sticks
Less pain in for the patient
Fewer wasted supplies
24 bright light emitting diodes (LEDs), using patented colors**, help find veins in children, adults, dark skinned and overweight patients. The C-shaped design stretches the skin for easy needle insertion and stops vein from rolling during access.

*Veinlite Transilluminatin in the Pediatric Emergency Department. (Katsogridakis et al - PEC 2008) **Patent Pending

Kit includes:

Rechargeable LED Veinlite¨
24 LEDs in 2 colors
Charger
50 disposable covers
Light shield
Pediatric adapter

Veinlite EMS Pro®

The newest Veinlite EMS PRO® is the most practical vein finder for general vein access in adults and children. This new device is modeled after the Veinlite EMS®, but includes a built-in white exam light mode that can be used in initial patient assessment. Powered by two AA batteries and with 24 colored LEDs operated by a single switch, the robust but easy-to-use EMS PRO® model is ideal for mobile medical responders and is priced to equip the whole team.

LED vein finder for efficient IV access in emergency medicine, featuring a built-in white exam light for working in low-light conditions. The Veinlite EMS PRO® uses 24 LEDs in 3 colors including the white exam light. The kit includes 50 disposable plastic covers, light shield, pediatric adapter plus 2 AA batteries.

Features:
White Exam Light
Optimal area of illumination
Works on all age patients
Patented* color for high contrast imaging
Works on dark and light skin tones
Auto shut off switch
Longer battery life
1 year parts and labour warranty
Specifications:
Number of LEDs: 24 (12 Orange + 4 Red + 8 white)
Number of Switches: 1
Inside Ring Diameter: 21mm
Battery Charger: No
Batteries: 2xAA Alkaline
Battery Life: 550 minuets continuous
Pediatric Adapter: Included
Light Shield: Included
Weight: 59.2 gm (without battery)
Weight: 108.2 gm (with battery)
Dimensions: 115mm x 55mm x 21mm
Kit Includes:
EMS Pro Veinlite®
24 LEDs in 3 colors
2 AA batteries
50 disposable covers
Light shield
Pediatric adapter

Replacement Battery For Veinlite LEDX and Veinlite LED

Replacement Battery For Veinlite LEDX and Veinlite LED

Terumo Nanopass Pen Needle 34g x 100

NANOPASS 34 is 22% thinner than 32G.

• Pain is primarily related to needle thickness. There are 100-200 pain receptors per cm_ human skin surface. NANOPASS 34 decreases the probability of touching the pain receptors and therefore makes the insulin injection virtually painless.
• NANOPASS 34 causes less skin trauma than larger needle sizes, which results in less pain.
• The unique asymmetric edge of NANOPASS cuts the skin instead of puncturing it.
• This decreases the resistance while penetrating the skin. Another step towards virtually painless insulin injection.
• The patented slim double tapered needle shape reduces the insulin injection force significantly.
• Although the needle tip is 34G, NANOPASS 34 provides less injection force than a conventional 32G pen needle.
• NANOPASS 34 combines virtually painless injection with easy handling.

• Needle tip diameter: 34G (0.18mm)
• Needle length: 4mm

Unisharp 1ml Fixed 30G 0.5" Lime X 100

High quality, 1mL fixed needle low dead space syringe with volume markings in mL rather than insulin units.

Originally designed in different colours to prevent accidental mix ups of syringes, the colours are also useful in general medical or cosmetic settings to reduce patient anxiety. Suitable for both subcutaneous and intravenous injections.

The 30G needle is very fine to reduce injection discomfort to a minimum, and facilitate a very precise injection.

Unisharp 1ml Fixed 29G 0.5" Pink X 100

High quality, 1mL fixed needle low dead space syringe with volume markings in mL rather than insulin units.

Originally designed in different colours to prevent accidental mix ups of syringes, the colours are also useful in general medical or cosmetic settings to reduce patient anxiety. Suitable for both subcutaneous and intravenous injections.

The 29G needle is strong for injection through scarred or tough tissue, and fine for reduced discomfort during injection.Ê

BD 1ml Syringe Complete with 25g x 16mm Needle x 100

BD 1ml Syringe Complete with 26g x 1/2#34 Needle per 100

• 1ml BD Safety-Lok BD disposable syringe
• 100 per Box
• Central Nozzle
• Complete with 26g x .5 Inch Needle

Plastipakª 10 ml Hypodermic Syringe, 3 piece with needle, 21g green 40mm per 100

• Needle Size: 21g / 0.8mm
• Colour: Green
• Needle Length: 40mm / 1_"
• Wall: Thin
• Bevel: Regular
• Latex Free
• Pack of 100

Unisharp 1ml Fixed 27G 0.5" White X 100

High quality, 1mL fixed needle low dead space syringe with volume markings in mL rather than insulin units.

Originally designed in different colours to prevent accidental mix ups of syringes, the colours are also useful in general medical or cosmetic settings to reduce patient anxiety. Suitable for both subcutaneous and intravenous injections.

The slightly thicker 27G needle is most commonly used when the injection is to be given through tough, or scarred tissue.

BD SafetyGlide Safety Insulin Syringe & Needle 1ml 29g x 1/2" x 100

• BD SafetyGlideª Insulin Syringe withÊPermanently Attached NeedleÊ

Terumo 2ml Syringe & Needle 25g x 5/8" x 100

• Latex-free
• Integrated plunger stop which stops the plunger from being pulled out accidentally
• Unique double-bevel design and precision manufacturing to provide ultra sharp needles, which translates into greater comfort for the patient
• Ultra clear barrels

Note: please be aware, this Syringe is classed as 2ml, although they graduate it to 2.5ml as the barrel is long enough to allow a further .5ml if required.

Steroid Multi-Cycle Pack- 84 syringes

This steroid multi-cycle pack, has 84 x 2.5ml syringes, plus green needles for drawing up, and long blue needles for injecting, with enough equipment for multiple cycles, depending on the drug injected. Everything you need sorted, in one simple order.

Please note, the box does NOT include a container for the used needles and syringes

Contains:

• 84 x 2.5ml syringes
• 84 x Green needles to draw up
• 84 x Blue needles to inject in the glute (or quad)
• 100 x Pre-injection swabs
• 1 x leaflet

Robinsons IPA Alcohol Pre-Injection Swabs x 100

Temporary limit of 12 boxes per customer

Box of 100 70% IPA Alcohol Pre-Injection Swabs

• Contains 70% (IPA) Alcohol
• Acts as a disinfectant to clean and remove bacteria prior to administering an injection
• Individually wrapped
• Impregnated non-woven swab
• 100 swabs for pre-injection site cleaning

Ri-clip Vein Compressor - Latex Free

The Riester LF5000 blood stasis product is a ri-clip vein compressor or tourniquet, packed in a plastic bag and is latex-free.

Taking blood should be as fast and easy as possible - and this begins with compressing the veins. Discover a new product from Riester that makes this task much easier. Because when you put the cuff in place, you have always got one hand free. The high-quality plastic (free of all metals) is light as a feather and works like a dream. Due to Riesters design the Vein Compressor makes uncomfortable pinching of the skin or small hairs a thing of the past.

And all this at a highly attractive price. Even the requisite hygienic precautions are easy to carry out: the device can be disinfected either with commercially available products or in an autoclave at 120 Degrees C/1 bar.

Syringe Tip Cap Tray box of 500

308341 - Luer tip cap (10/sp, 2000/ca) The BD Tip Cap tray preserves sterility, enhances productivity and reduces waste. Latex-free caps are packaged for ease of application and minimized risk of touch contamination. Cover peels back to access tip caps as needed, preserving sterility for remaining caps. Slip-on design allows quick application Self-venting feature reduces additional manipulation Sealed tray sections save time and costs while maintaining sterility

This listing is for a quantity of "Box of 500", but we also have listings for quantity of "Box of 2000" and "Box of 10". The listings for other quantities can be found in the "Related Items" below.

All images are supplied to us by the manufacturers, and may not represent the specific product you are ordering. This product may differ in color, features, or may be an accessory. Please refer to the model number or contact us if you have any questions.

BD IV Cannula Dressing Veca-C, Box of 50

Fixation Dressing

BD VECA-C™ (STERILE FIXATION DRESSING FOR INTRAVENOUS CANNULA)

Reliwipe Moist Saline Cleansing Wipes - Per Pack of 5

Reliwipe Moist Saline Cleansing Wipes - Per Pack of 5

Individually wrapped alcohol-free disposable wipes.

• Impregnated with aqueous cleansing solution
• Safe and easy to use
• Made from a soft fabric material rather than crepe or paper
• Gentle on the skin

Clinell Alcoholic 2% Chlorhexidine Skin Wipes x 200

Clinell Alcoholic 2% Chlorhexidine Skin wipes are ideal for cleaning skin after dressing and plaster removal, especially where the dressing has caused dirt to develop. In certain countries, it can be used as part of a medical procedure, e.g. as a pre-injection swab, according to local regulations.Ê

Our powerful cleaning formula contains two main active ingredients: 2% chlorhexidine gluconate and 70% isopropyl alcohol.Ê

Sterowipe Alcohol Free Cleansing Wipes Box of 100

Small, individually sealed wipes.

• Cleans skin to ensure greater adhesion of dressings.
• Supplied in a box of 100 or per pair.
• Individual sachets joined in pairs.

Rack, Back-Up, For SRS/SRT, 10 Tubes, 729073, Graduated

• Rack, back-up, for SRS/SRT, 10 tubes, 729073, graduated

Rack, ESR, Blue, For 10 Tubes, ESR, 729070, Graduated

• Rack, ESR, blue, for 10 tubes, ESR, 729070, graduated

Disposable Covers for VeinLite Pedi x 50

• Disposable plastic covers for single use - 50 per packet
• Latex Free

Airzone Windmill Trainer

The Windmill Trainer has been designed as a training aid to develop good PEF technique in:ChildrenElderlyPeople with language or learning difficulties

The Windmill Trainer is aimed at children and injects some fun into peak flow measuring. For healthcare professionals this incentive training tool helps to save time, teaching good flow technique and permits younger children to benefit from peak flow monitoring.

Product Features & Benefits

• Ideal for teaching peak flow technique to children
• Reduces variability in readings
• Clips easily onto AFS and Airzone Peak Flow Meter
• Adds an element of ‘fun’
• Saves time

Mini-Wright Peak Flow Windmill Trainer

The Windmill Trainer has been designed as a trainingÊaid to develop good PEF technique in:

• Children
• Elderly
• People with language or learning difficulties

The Windmill Trainer is aimed at children and injects some fun into peak flow measuring. For healthcare professionals this incentive training tool helps to save time, teaching good flow technique and permits younger children to benefit from peak flow monitoring.

Product Features & Benefits

• Ideal for teaching peak flow technique to children
• Reduces variability in readings
• Clips easily onto AFS and Airzone Peak Flow Meter
• Adds an element of ÔfunÕ
• Saves time

Replacement Battery For Veinlite LEDX and Veinlite LED

• Replacement Battery For Veinlite LEDX and Veinlite LED

VeinLite Lanyard for Pedi and EMS VeinLites

• anyard with detachable clip for Veinlite PEDI or Veinlite EMS

Carry Case for VeinLite EMS

• Carrying case for Veinlite EMSå¨ with belt clip and pouch for covers

Disposable Covers for VeinLite LEDX x 50

• Disposable plastic covers for single use - 50 per packet
• Latex Free

DermLite Connection Kit For Phones (iPhone & Android)

iPhone

Finally, you can use the functional power and optical beauty of the DermLite you already know & own to take digital images with your iPhone.

Conveniently, the DermLite iPhone case leaves all iPhone jacks and buttons accessible and is no bulkier than most consumer-grade cases. Add itÕs superior scratch and impact protection to the list of reasons why you can keep it attached to your iPhone all the time, even when you are not doing dermoscopy.

Android

Finally, you can use the functional power and optical beauty of the DermLite you already know & own to take digital images with your Samsung Galaxy device.

Conveniently, the DermLite GalaxyÊ case leaves your deviceÕs jacks and buttons accessible and is no bulkier than most consumer-grade cases. Its superior scratch and impact protection adds to the list of reasons why you can keep it attached to your device all the time, even when you are not doing dermoscopy.

Connection Kits available for the following phones:

• iPhone 6+ & 6S+
• iPhone 5
• iPhone 6
• Samsung Galaxy S8
• Samsung Galaxy S8+

VeinLite LED+ Skin Transilluminator

The newest adult model with optimum viewing area and highest contrast for vein imaging. The wide C-shaped design stretches the skin for easy needle insertion and stops vein from rolling during access. The rechargeable Veinlite LED+ features 28 bright light emitting diodes (LEDs). The 22 bright orange and 6 deep red LEDs can be operated together or separately for maximum versatility and use on patients of all ages and skin tones. With this model there is no need to keep spare batteries in hand.

• Fewer IV access failures
• Fewer needle sticks
• Less pain in for the patient
• Fewer wasted supplies

24 bright light emitting diodes (LEDs), using patented colors**, help find veins in children, adults, dark skinned and overweight patients. The C-shaped design stretches the skin for easy needle insertion and stops vein from rolling during access.

*Veinlite Transilluminatin in the Pediatric Emergency Department. (Katsogridakis et al - PEC 2008) **Patent Pending 

Kit includes:

• Rechargeable LED Veinlite®
• 24 LEDs in 2 colors
• Charger
• 50 disposable covers
• Light shield
• Pediatric adapter

Veinlite EMS Pro¨

The newest Veinlite EMS PRO¨ is the most practical vein finder for general vein access in adults and children. This new device is modeled after the Veinlite EMS¨, but includes a built-in white exam light mode that can be used in initial patient assessment. Powered by two AA batteries and with 24 colored LEDs operated by a single switch, the robust but easy-to-use EMS PRO¨ model is ideal for mobile medical responders and is priced to equip the whole team.

LED vein finder for efficient IV access in emergency medicine, featuring a built-in white exam light for working in low-light conditions. The Veinlite EMS PRO¨ uses 24 LEDs in 3 colors including the white exam light. The kit includes 50 disposable plastic covers, light shield, pediatric adapter plus 2 AA batteries.

Features:

• White Exam Light
• Optimal area of illumination
• Works on all age patients
• Patented* color for high contrast imaging
• Works on dark and light skin tones
• Auto shut off switch
• Longer battery life
• 1 year parts and labour warranty

Specifications:

• Number of LEDs: 24 (12 Orange + 4 Red + 8 white)
• Number of Switches: 1
• Inside Ring Diameter: 21mm
• Battery Charger: No
• Batteries: 2xAA Alkaline
• Battery Life: 550 minuets continuous
• Pediatric Adapter: Included
• Light Shield: Included
• Weight: 59.2 gm (without battery)
• Weight: 108.2 gm (with battery)
• Dimensions: 115mm x 55mm x 21mm

Kit Includes:

• EMS Pro Veinlite¨
• 24 LEDs in 3 colors
• 2 AA batteries
• 50 disposable covers
• Light shield
• Pediatric adapter

K-9 IV Trainer

Specifically built to teach the drawing of blood and performing of injections, our Canine IV Trainer is the perfect pedagogical tool for this purpose. It is realistically sculpted as the hind limb of a dog. This simple product will help students become accustomed to these tactile procedures.

Nita Newborn - Simulator for Venous Vessel Access

This model of a newborn female (1.8 kg/40.6 cm) is perfectly suited for studying and practicing both venous access and injections and drawing blood samples. Correct puncturing will produce a backflow of artificial blood.

This model allows access to the following veins:

• Basilic vein and axillary vein (arms)
• Saphenous vein (leg)
• Popliteal vein (leg)
• External jugular vein (neck)
• Temporal vein (head)
• Umbilical vein (navel)

Each of the following methods can be practiced:

• Normal puncture of a vein
• Central venous catheterization
• Umbilical (naval) catheterization
• Positioning a butterfly cannula
• Bandaging
• Fixing catheters
• Insertion and care of endotracheal and endonasal catheters and feeding tubes
• Supplied with 1.1 liters of artificial blood, blood bag, diaper and carrying bag.

Henelys Mixing Kwill - Sterile - Pack of 100

127mm length mixing kwill used for drawing up fluids from vials, ampoules or bottles.

• Virtually transparent
• Will not kink in use
• Moulded luer fitting for syringe
• Tapered distal end
• External diameter 4.95mm
• Internal Diameter 3.94mm
• Supplied Sterile

IntraMuscular Injection Model

• A simulator for use in practising intramuscular injection techniques
• Manufactured from soft material that mimics human skin
• Can be reused
• Ideal for use in medical training scenarios

Features of the Intramuscular Injection Model

The Intramuscular Injection Model is for used in training intramuscular injection techniques with medical trainees. The level of detail and realism included with the Intramuscular Injection Model makes it ideal for use in medical training scenarios.

The Intramuscular Injection Model is easy to use and is designed to provide incredibly realistic practice scenarios. The Intramuscular Injection Model can be punctured repeatedly without the need to replace components in order to provide excellent longevity. 

Diabetic Injection Pad

Diabetic Injection Model Kit

Intradermal Injection Simulator

Paediatric Head Ð Injection Trainer

IntraMuscular Injection Simulator

Pediatric Caudal Injection Simulator

Lumbar Epidural Injection Trainer

IM Injection Pad

Even animals have nerve cells to indicate pain or discomfort and having an injection administered by a skilled medical person makes a world of difference to a pet. Now you can practice and become more apt at injections with the improved SQ/IM Injection Pad. Practical experience may help
burnish the clinical motor skills, but alas, it is providing better critical care to the injured animal that is, perhaps the ideal. This trainer features an even more realistic pad simulating canine skin and muscle tissue and comes in its own ABS case.Ê

Dimensions of the SQ/IM injection pad are: approx. 7.5 x 12.7 x 3.2 cm

Diabetic Injection Pad - Advanced Version

Child-Injection Training Arm

Advanced Injection Belly

I.V. Injection Hand

Erler Zimmer Training Arm for Intravenous Injection

• The injection model is intended to give the prospective physician and medical auxiliary staff the opportunity of practicing intravenous injection.
• The model consists of soft synthetic material with an exchangeable skin in addition to an exchangeable injection site on the elbow, in which the median elbow vein (median cubital vein) is represented by a tube.
• The vein is visible under the skin and can additionallyÊbe easily palpated.
• The tension of the skin and the characteristics of the occluded vein is imitated in an approximatelyÊtrue to life manner.
• The model is characterized particularly by theÊpossibility of compressing the vein realistically and of simulating a roll veinÊvia the application of lubricant.
• Tested in rigorous daily use in the German army.
• All individual components are available separately.

Training Model for intradermal - subcutaneous & intraMuscular Injection

Training Model for intradermal - subcutaneous & intraMuscular Injection

Erler Zimmer Training Arm for Intravenous Injection and Infusion

Replacement Veins for Injection Training Arm

Intravenous Injection Training Arm

Injection Training Arm for R17710

I.V Injection Training Arms & I.M Injection Trainer

Terumo Versatus Winged and Ported IV Cannula 20g (Pink) 32mm x 50

• The catheter is made from polyurethane which is firm at room temperature and softer at body temperature, kink resistant and biocompatible: patient comfort is enhanced. This catheter is radio-opaque.
• The quality of the bevel of the internal needle ensures a precise incision.
• The perfectly tapered catheter tip allows the catheter to enter the vein without causing any venous trauma and an easy placement of the catheter. In this way the comfort of the patient is guaranteed. The optimum bevel / catheter tip distance reduces the risk of passing through the vein.
• The winged catheter hub ensures easy fixation of the catheter. The EN/ISO coloured hub of the Versatus¨ range with wings confirms the catheter size.
• The injection port allows the intermittent injection of medicines during infusion. Due to central position there are less risks of damaging the vein and patient trauma during intermittent injection.

BD Push Button Blood Set 25g x 0.75 Per 50 With Luer Adaptor 7 Tubing

• The BD Vacutainer® Push Button Collection Set is the only blood collection system with push-button technology.
• The BD Vacutainer® Push Button Collection Set offers split-second protection for that single moment which could potentially change your life.
• The push-button safety mechanism instantly helps protect you against needlestick injury. Its in-vein activation reduces risk of healthcare worker exposure to a contaminated needle, provides easy activation without patient discomfort, and is ideal for use in high-risk environments.
• The one-handed safety activation of the push button allows for activation of the safety mechanism while still attending to the patient/venipuncture site, and provides easier, safer blood collection for the healthcare worker, with no compromise to patient care.

VACUETTE¨ Tube, BSE, Nac 3.8%, 1.5ml, Black, Sterile - Box 50

VACUETTE¨ Tube, BSE, Nac 3.8%, 1.5ml, Black, Sterile - Box 50

Venofix Butterfly Cannula 19G Beige x 50

• Made of high quality chrome nickel-steel
• Micro siliconized precision bevel
• Interlocking wings with structured grip surface
• Tubing: length 30 cm, kink-resistant, flexible, good readjusting properties, transparent
• Latex-free
• Lock fitting
• Closing cone lock

Surshield Versatus Winged and Ported IV Cannula - 20G x 32mm x 50

• The passive safety mechanism of the Surshield Versatus IV catheters can beÊeasily activated with one hand.ÊThe needle tip is completely encapsulated preventing accidental needle stick injuries.
• The Versatus catheters are made out of special medical grade polyurethane which becomes very soft at body temperatureÊensuring patient comfort.
• The unique Terumo needle point design and precisely honed bevel edges in combination with the perfectly tapered and siliconised catheterÊallow a smooth and nearly painless placement.
• Additionally the Versatus catheters are opaque and kink resistant further improving the patient comfort and safety. The large range in catheters and related obturators allows the best choice for a wide range of applications.

Surshield Versatus Winged and Ported IV Cannula - 22G x 25mm x 50

• The passive safety mechanism of the Surshield Versatus IV catheters can beÊeasily activated with one hand. The needle tip is completely encapsulated preventing accidental needle stick injuries.
• The Versatus catheters are made out of special medical grade polyurethane which becomes very soft at body temperatureÊensuring patient comfort.
• The unique Terumo needle point design and precisely honed bevel edges in combination with the perfectly tapered and siliconised catheterÊallow a smooth and nearly painless placement.
• Additionally the Versatus catheters are opaque and kink resistant further improving the patient comfort and safety. The large range in catheters and related obturators allows the best choice for a wide range of applications.

BD Push Button Blood Set 25g x 0.75 Per 50 With Luer Adaptor 7 Tubing

• The BD Vacutainer¨ Push Button Collection Set is the only blood collection system with push-button technology.
• The BD Vacutainer¨ Push Button Collection Set offers split-second protection for that single moment which could potentially change your life.
• The push-button safety mechanism instantly helps protect you against needlestick injury. Its in-vein activation reduces risk of healthcare worker exposure to a contaminated needle, provides easy activation without patient discomfort, and is ideal for use in high-risk environments.
• The one-handed safety activation of the push button allows for activation of the safety mechanism while still attending to the patient/venipuncture site, and provides easier, safer blood collection for the healthcare worker, with no compromise to patient care.